2871 Turbo ,Autopower Rollcage,SR BC cams

[zolika]

Turbo setup: SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Precision/Garett Gt2871R .64 turbo
Megan Racing manifold
Greddy turbo elbow
Stage6 intake piping
I made 412whp @ 20 psi on this setup never went higher
Low miles (1000mi)that inculdes a 500mi trip to Cordele to brake in my motor.
I always warm up the car oil/water be4 i drive it and let it cool down before i shut it off.
Still on the car.
Everything is in great condition.
$1000
http://i166.photobucket.com/albums/u118/zolikadrift/auto081.jpg
http://i166.photobucket.com/albums/u118/zolikadrift/proam08003-1.jpg


If anybody interested i'll be selling 6 point my autopower bolt in cage also. with 2 doorbars on the driver side welded so i have to cut that. But you can put a sleve on it. $450
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


http://i166.photobucket.com/albums/u118/zolikadrift/auto063-1.jpg
http://i166.photobucket.com/albums/u118/zolikadrift/auto009.jpg


S14 Kouki ProjectMU Bforce front brake pads BNIB :$60
S14 Kouki corner lights: $60 one with broken tab but they brand new
Sr20det unorthodox racing crank pulley :$100
BC Racing Step3 272 cams S14/S15 (500mi):$150
http://i166.photobucket.com/albums/u118/zolikadrift/kacatok001.jpg
http://i166.photobucket.com/albums/u118/zolikadrift/kacatok002.jpg
http://i166.photobucket.com/albums/u118/zolikadrift/kacatok003.jpg
http://i166.photobucket.com/albums/u118/zolikadrift/kacatok004.jpg

[JJTRacer]

Willing to sell just these two?

Precision/Garett Gt2871R .64 turbo
Megan Racing manifold

[zolika]

Yeah, sure $850.
But i would get the whole thing the cold air intake pipes are made for z32 maf and they been powder coated and comes with couplings too.
Plus the Greddy elbow is almost brand new.

[JJTRacer]

Cool, so this comes with everythig i need to install on redtop sr right?

[Chrischeezer]

does this includes the oil and water lines? also what type of restrictor was used?

[zolika]

You need to get the turbo lines i had it on a s15 but thats the all.

[zolika]

does this includes the oil and water lines? also what type of restrictor was used?

I dont know i bought it from Stage6Motorsorts they building all kinds of turbocharged cars so they know what to do.

[speedgod^s13]

How much just for the turbo elbow shipped to 96816?

[JohnnyDrfiter22]

shippin on cage??

[NeedCAforS13]

Where in Florida? I want the cage, and I'm in Tampa.

[slider2828]

Wait what? 420HP on what dyno? I would like to see that especially at 20PSI on a .64 AR.....

[zolika]

Where in Florida? I want the cage, and I'm in Tampa.

Jacksonville.

[zolika]

Wait what? 420HP on what dyno? I would like to see that especially at 20PSI on a .64 AR.....


Dynodinamics.
412whp @20psi on race gas tuned by MASE
Stage6 biulds awsome cars great with tuning too
Like this:
YouTube - Stage 6 GT TT (http://www.youtube.com/watch?v=YJC9qaMfRSI)
The most they made was like 1600whp after a turbo upgrade on this car.
I gotta find my sheet also and post it up.

[bradystrib]

Dynodinamics.
412whp @20psi on race gas tuned by MASE
Stage6 biulds awsome cars great with tuning too
Like this:
YouTube - Stage 6 GT TT (http://www.youtube.com/watch?v=YJC9qaMfRSI)
The most they made was like 1600whp after a turbo upgrade on this car.
I gotta find my sheet also and post it up.
i know those guys. is travis still driving the red hatch? and zoltan?

[zolika]

Hey what's going on? Haven't seen you in a while.
His moved to another shell. And thats what i'm doing also right know.

[zolika]

shippin on cage??

I don't know but i guess like $140

[slider2828]

That is a built GT40 with Bi-Turbos..... 1400 is bs they only got 1012, cause base is 560 on a dyno dynamics for a gt40, they are using dual GT35Rs and its on a dynojet... Therefore I really doubt 412HP on a dynodynamics...

[Chrischeezer]

consider it sold
I want that turbo set-up.. where do i send the money?

[Nissan2nr22]

I got to it first actually, i sent him a pm

[lttletimmy]

Great deal, if the 2 people ahead of me end up not taking it, I almost certainly will

[91tofordee]

dang! if no one claims it i will.

[zolika]

The turbo setup is pending to Nissan2nr22

[zolika]

The turbo setup is still for sale!!
Who ever got the money first pm me or paypal the money to [email protected]!!
+$40 for shipping all 48 states.
Thank you!!!

[ZeNkI SiLvIa]

i am highly interested in the 6 point cage how much for shipping to 42103 if i no one sells me a standalone.

[nieko]

see how much my paycheck is this friday and i might be picking up the turbo stuff...

hopefully no one buys

[xsublimefrekx]

if your willing to separate the turbo only i have money and can send it within the week. Give me a price on the turbo only if you want.

[Erjay1]

Price on turbo, manifold and elbow shipped to 91406. Very interested and have the funds available. Thanks.

I am also very interested in that intercooler setup you have there. Looks very nice. Can you post or pm me a few pics of the setup and some info on it? The engine looks very clean and that VQ in the background looks nice too...lol.

[2muchboost]

Turbo and stuff still for sale?

[zolika]

^Yep !!!!!!!

[boostintt]

pm sent on the gt2871r

[burninrubber85]

hey sorry to ask but is the turbo still for sell or is it sold

[arabdk]

cage still for sale?

[chris300zr]

pm'd back.

msglngth

[BILLFISHER21]

cage sold to me i already installed that bitch bump for zole

[srdet811]

is the turbo still for sale?

[racerx2k1]

3 month old thread.