sr wont start after motor install....help

[vladimir240]

hey guys, first of admit that I'm a newbie and just did my first swap. well it was kinda a swap, just changed out the block+head. i got the motor in the and as i left the wiring harness in, reconnected all the connectors to my knowledge. there are a few that are unused.

after trying to start it, nothing happens. the battery is good, and i can turn the lights on, hazards, dome light, and key chime works. no fuel pump, radio or anything.

this is also for sr20det in a s13

i have no clue wat to do now, so any help would be appreciated. thanks.

[fliprayzin240sx]

Double check all the connections and make sure theyre all connected.

[godsmack]

you swapped from what to what? non turbo to turbo?

[vladimir240]

went from a black to a redtop, both turbo

[vladimir240]

...anyone??

[DoriftoPnoy]

shouldn't bump your thread late at night. all the smart people are usually asleep.

interesting how your fuel pump doesnt work tho. should check the wires for that.....

so im guessing it doesnt crank too? something has to be loose

[1GayDrifter]

if it is what i think it is, its in your harness. guaranteed.

do yourself a favor. take off ur harness, rewire it or get me or someone else to check ur plugs and re wire it, replacing bad wires with good ones, shrink wrap it and have a gold solder on them. then if that fails, it will be ur igniter, still wont start? coil packs and spark plugs. it will cost some money but it guarantees that ur car will start each time and wont fail electronically for a long while