Stock Swaybar Hits Greddy Oilpan?

[Osmosis]

So I currently have Tanabe Sustec swaybars on my car and wanted to go back to stock. Well, I put the front on and it rests on the Greddy pan and rubs pretty badly on it. Anyone else have this problem and what's the remedy?

[Dousan_PG]

i run stock bars w/ a greddy pan and it cleras by quite a bit
motor mounts??

[bik]

your car been on a big crash??

[racepar1]

Make sure your sway bar brackets aren't bent and are properly installed (I've seen it before) and check that your motor mounts are not sagging or improperly installed. It SHOULD clear easily.

[IIIXziuR]

Yeah this obviously sounds weird...

Is everything lined up properly?

I dunno. Double check it should fit no sweat.

[brndck]

also make sure your sway bar is centered. if it has slid to one side then it will for sure rub.

[DJ_Sunrise]

S13? S14?....

[Osmosis]

S13, Nismo mounts are good, I guess I'll check the brackets. So weird. Thanks for the suggestions.

[Chrischeezer]

your mounts are on backwards lol... maybe

[SHIFT_Slide]

Older thread but....

Hey Dousan (or anyone else), any chance you have a pic showing the oil pan/ cross member and sway bar?
I'm thinking if the oil pan is flush with the cross member the sway bar will hit it.