apexi avcr first gen wiring dilemma

[alesserfate]

Rigging my winter beater with this boost controller, its an Apexi SUPER AVC-R type-r first generation. Came with the unit, actuator solenoid, map sensor, and a chopped harness. I think the pictures speak for themselves. Anybody have one they can take a few pictures of the map sensor connector harness to solve my dilemma ?

http://www.vladcrown.com/images/other/avcr/DSCN3915.JPG
http://www.vladcrown.com/images/other/avcr/DSCN3916.JPG
http://www.vladcrown.com/images/other/avcr/DSCN3933.JPG

If anyone can help would be great! Also can't find a wiring manual for this version on the apexi website.

[alesserfate]

Thanks HEATW, problem solved! plz lock


-
http://j-trade.cranky.jp/IMG_P0063.JPG

[arpee79]

Need Help on this wiring diagram, so i must revive this 3 yr old thread. I only have a cut harness from this Controller "Apexi S-AVCR Generation 2 "
8 wire plug. I have a MAC(2wire) Solenoid and a pressure sensor from HKS Electronic boost guage I trying to use and tap into for the Pressure sensor on the AVCR( is this dueable ?)

Need to know what goes where?

Red ---- 12v Switched
Yellow ---- ?
Blue ------ Injector Signal
Brown ----- ?
Green ----- ?
Pink ----- ?
Black ------ Ground
Orange ---- 12v Constant

Any help is greatly appreciated.

[arpee79]

Night Bump, Anyone know anything about this 15 year old Boost Controller ?

[project-c2]

I still got mine. Easiest controller to set and never had it spike on me ever. I am actually trying to look for the schematics online.

[arpee79]

I have search for nearly 2 weeks and found only pictures , if I could get a close up of the 6 pin plug on both side I would have my answer.


Still need help guys.

[arpee79]

Still no clue , please anyone with this same Boost controller please help me with a picture of the 6 pin plug or Wiring diagram for this PLEASE!!!.



Thank you

[arpee79]

Argh!!! Anyone out there ?

[arpee79]

:wtc: Well sad to say I still have not figured out how to wire my S-AVCR

If anyone out there can shed some like. maybe you have the same controller and you could take a close picture of the wiring harness . 8 pin plug to the Pressure Sensor plug and to the Solenoid.

I dont have the harness .. I made my own but dont know what goes where ,

Thanks in advance.

[arpee79]

Guess what ??


I still have not figured out what wire goes where , narrowed it down to only needing to know what wires ACTUATE the solenoid Valve.

Yellow wire Maybe and Ground ..

If anyone have one that can pinpoint what color wires from control unit to valve and maybe Pressure sensor that would be Just great.

Thanks In advance.