Mazworx Weld-In Roll Bar Kit! One of its kind!

[Mazworx_Sales]

Why buy from us?
Unlike the other companies, we have the vehicles here to mock up the chassis correctly for almost to near perfect tight fitments.

Unlike other companies, we use the highest grade and thickest material for these parts to ensure safety.

Unlike other companies, we just dont hang you a bunch of bars and you figure out where they go and then half the time there not even correct so you have to cut and notch and have fitment issues. Why waste the time?

And like other companies, we specialize in S-Chassis's and cage fabrications.


We are proud to offer a easy to install u-weld roll bar kit for the S-Chassis. The roll bar will be SCCA and NHRA legal. Made from 1 3/4" x .120" wall DOM tubing.

The main hoop will already have the harness bar and diagonal bar pre welded.

Please note that are weld-in roll bars or cages now WILL NOT have pre-notched door bars. Everyone has different size seats and preferences so we will not offer the door bars pre-notched.

Prices are as follows:

S13/S14

4point (no door bars) $325.00 ($150.00 standard truck shipping to business/commercial address $185.00 residential address) X-Brace add $100.00

6 point (with doors bars no modifications available at the moment unless you want to bring the car to us) $385.00 ($150.00 standard truck shipping to business/commercial address $185.00 residential address) X-Brace add $100.00

Formula D Style Full Cage 8 point with X-Door Bars, X-Brace, A-Pillar Bars, Top Windshield Bar (Alot safer than a "halo") $ 725.00 ($150.00 standard truck shipping to business/commercial address $185.00 residential address) Bar behind dash add $75.00



REMEMBER, this will be one of the easiest u-weld cages you will find. And being that we develop everything inhouse guarantees fitment.

Here is an example of the roll bar:

http://mazworx.com/pics/dsc02814.jpg


http://mazworx.com/pics/dsc02816.jpg


http://mazworx.com/pics/dsc02817.jpg


http://mazworx.com/pics/dsc02818.jpg

Formula D style cage

http://mazworx.com/pics/s13coupe_fmulad.jpg

S14 Roll bar 6 point


http://mazworx.com/pics/s14_rollbar.jpg

http://www.mazworx.com/pics/s13coupe_fmuald.jpg

[KA-T_240]

Damn!! Looks good! Has it been tested in a hatch?

Will this work with having stock interior? Would it be possible to order with out the door bars? Also, does it come with all the plates that weld to the strut towers/floor?

[RAMM]

Would it be possible to order with out the door bars? Also, does it come with all the plates that weld to the strut towers/floor?

Also, is there a kit for the S14? Im very interested.

[Mazworx_Sales]

Damn!! Looks good! Has it been tested in a hatch?

Will this work with having stock interior? Would it be possible to order with out the door bars? Also, does it come with all the plates that weld to the strut towers/floor?

On the stock interior part not too sure about that, it looks like it will work. Yes we can do it without door bars, 75.00 less. It will come with everything you need to put it together.

[Mazworx_Sales]

Also, is there a kit for the S14? Im very interested.

Yes S14 kit is available.

[mendozasport]

would you have any pics of s14 install
also interested without door bars and i am local orlando
so
what would be install fees

[YoungGun]

Ooooo this is what I want.

How long will this be going on for?

[Mazworx_Sales]

Ooooo this is what I want.

How long will this be going on for?


No set time really. We want to get this rolling now!

[gsracer]

These are great roll bars, mazworx makes quality stuff, with a great price too.

Heres what it looks like in an s14 with the rear x brace.


http://img.photobucket.com/albums/v344/gsracer/Projectbacktobasics/IMG_6287.jpg

http://img.photobucket.com/albums/v344/gsracer/Projectbacktobasics/IMG_6288.jpg

http://img.photobucket.com/albums/v344/gsracer/Projectbacktobasics/IMG_6295.jpg

[Mazworx_Sales]

Thanks for the pics man!

[Syncade]

Does it fit sunroof'd s14s?

[gsracer]

mine has the sunroof its in the pics ???

[Mister.E]

wow, that is really nice. you cant beat that price either

[SoCal-s130]

Will this work in a s13 with powered sun roof?

[Mazworx_Sales]

Will this work in a s13 with powered sun roof?

Yup no problem

[Z33dori]

that side bar looks so high....

doesn't look fat man friendly. oh well

how much for the basic 4pt roll bar w/ xbar

[hotlavaflow]

Interested in 6-point cage with X-bar option for S13 coupe with powered sunroof. How much is shipping to 11210?

[xdumbxguyx]

looks real good

[posracing]

hi, can you add me to the list? also, can you pm me shipping cost to 94043?

i want the 6-point cage for s13 hatch w/ sunroof

[TRU_DAH-V]

s14 shipped to 96915

[Antihero983]

price shipped with NO door bars for S13 hatch SE to 03103

[ashaw3]

Price shipped with no door bar for s13 hatch to 30308. Thanks.

[Mazworx_Sales]

Guys and gals...S-Chassis means....S13 and S14 :)

[Bushido]

so.. what would i be looking at for main hoop with harness bar and diagonal, rear down bars to struts with X bar, and a tube between rear strut towers? i can pick it up too.

[racepar1]

Holy crap I NEED my taxes to come in NOW. Shipped price to 91324 (business address) for s-13 fastback w/o door bars and w/o x-brace please.

[HPballer76]

s13 hatch no sunroof shipped to 27410 thanks

[YoungGun]

Okay i'm ready for this now.

6 point + x brace shipped to 91303 CA please.

[S14cagged]

Is there anyway i could get the door bar modified to have 2 pipes running alongside of the drivers door.

i'll pm you a pic

[the head]

can you set it up so it will fit around an Evo L on the driver side? Do you have a 10 point kit? For S13 coupe

[Mazworx_Sales]

can you set it up so it will fit around an Evo L on the driver side? Do you have a 10 point kit? For S13 coupe

Something like this?

http://i597.photobucket.com/albums/tt51/mazworx/10ptcage.jpg

[Flicktitty]

Could you get me a price of one with NO DOOR BARS for s13 coupe

53051. thanks.

[tougekid]

Something like this?

http://i597.photobucket.com/albums/tt51/mazworx/10ptcage.jpg

yes. something witha halo.

[NiSilS14]

pricing for S14 roll bar w/o door bar but with x-bar to 80602. thanks!

[the head]

Something like this?

http://i597.photobucket.com/albums/tt51/mazworx/10ptcage.jpg

exacry

but I need to be able to have a pretty wide seat as I am also a fatty

[dirtdiggler666]

can i get a price for s14 just the 6 point shipped to 93551

[AceUp]

+1 if you could do an 8point cage. Price shipped to 85260 AZ? and wait time.

[bornslippy73]

I'm interested, but would like to see pictures of the actual 6 point cage with the side bars and X-bars installed in a hatch.

Ship to 94545-1372 for a S13 hatch with a power sunroof. 6-point cage with side bars and x-bars.

Also, I'm running a C-pillar bar and a rear strut bar so would there be any interference from the 6-point cage?

Thanks.

[Mazworx_Sales]

Sorry we dont have pictures of it installed in a hatch only in the coupe. We should start taking pics of all our cage/bar installs huh ;-)

I think the c-pillar bar maybe an issue but no the strut tower bar.

I'm interested, but would like to see pictures of the actual 6 point cage with the side bars and X-bars installed in a hatch.

Ship to 94545-1372 for a S13 hatch with a power sunroof. 6-point cage with side bars and x-bars.

Also, I'm running a C-pillar bar and a rear strut bar so would there be any interference from the 6-point cage?

Thanks.

[Mazworx_Sales]

PM's replied Thanks!

[Mazworx_Sales]

Thanks for the orders! Several bars are in the works already. If you guys are looking for a custom style cage, let us know.

[Mazworx_Sales]

PM's replied thanks!

[Mazworx_Sales]

PM's replied Thanks!

[robunicu]

me want s14:)

[Mazworx_Sales]

PM's replied Thanks!

[mehsilvia]

Any chance you have test-fitted or have one for an S13 Vert?
Im mainly asking if the main hoop fits.
I already know the rear braces will need to be custom/modified.
Just a rollbar, no doorbars needed.

[jjjjjjjjjjjjjjjjjjjjjjjjj]

Thanks for the orders! Several bars are in the works already. If you guys are looking for a custom style cage, let us know.

i know this is for the s chassis only but do you think you guys could do a custom m30/f31 cage??? i have an autopower 6point bolt in but i have to remove my sunroof in every car i put it in. i could take pix and dimensions or send it up to you guys if you could give me a rough estimate.

thanks for your time

[Mazworx_Sales]

Here is a S14 one for a customer ready to go!

http://i597.photobucket.com/albums/tt51/mazworx/s14_rollbar.jpg

[gsracer]

Dayum!!! Thats hot!!! I wish i had one like that..... o wait :)

[Mazworx_Sales]

Dayum!!! Thats hot!!! I wish i had one like that..... o wait :)


You do :)!

[gsracer]

You do :)!

Thats right, i remember now.

I love mine it just looks so bad ass forget the functional part lol

Fyi this is what people see when they look in there rear view mirror when im behind



http://pics.shorty.org/files/12/koni%20cup/DSC_0211.jpg

[black05srt-4]

Any pics of one installed in a hatch?

[HPballer76]

Any pics of one installed in a hatch?

i would also like to see pics if anyone has them. im almost ready to order one.

[Mazworx_Sales]

Sorry dont have any pics of it installed in a hatch. Its pretty self explanatory on how everything goes.

[Mazworx_Sales]

S13 coupe full cage w/ x door bars. Labeled, pre-notched.

http://i597.photobucket.com/albums/tt51/mazworx/s13coupe_fmulad.jpg

[HPballer76]

just ordered mine! :hsdance:

[2_Liter_Turbo]

I PM'd You

[xdumbxguyx]

price on the full cage with x bars would like to see how it fits inside a car as well

[0100]

S13 coupe full cage w/ x door bars. Labeled, pre-notched.



Nice! I hope whoever is getting this will post pictures after install.

How much would this be shipped to a business address?

[Mazworx_Sales]

PM us for price quotes but pricing is posted on the first page for basic roll bars.

Business shipping is only 10.00 less.

[fcdrifter20]

s13 coupe shiped to 92507....x-brace no door bars thnx

[Mazworx_Sales]

PM us for price quotes but pricing is posted on the first page for basic roll bars.

Business shipping is only 10.00 less.

:) msglength

[flamebag16]

S14 Roll Bar kit with x brace shipped to 78736

[buckaroo]

Can I have a price quote on an s14 6pt w/door no X to 80127

[0100]

Any pictures of the full cage installed?

Does it follow the A pillar right into the dash?

Also does the main hoop sit close to a non-sunroof headliner? I think I read these fit both sunroof and non-sunroof cars but I think the headliner is higher in a non-sunroof car. Just worried about a gap in a non-sunroof car.

Thanks.

[Mazworx_Sales]

Can I have a price quote on an s14 6pt w/door no X to 80127


Prices are posted in the first page.

[Mazworx_Sales]

Builds (http://www.mazworx.com/index.php?l=page_view&p=builds)

Or check out any of Enjuku's old drift cars. We did most of them.

A-pillar bar goes through behind the dash. We make the cages as tight as possible.



Any pictures of the full cage installed?

Does it follow the A pillar right into the dash?

Also does the main hoop sit close to a non-sunroof headliner? I think I read these fit both sunroof and non-sunroof cars but I think the headliner is higher in a non-sunroof car. Just worried about a gap in a non-sunroof car.

Thanks.

[0100]

^good stuff man. Thanks.

[buckaroo]

Prices are posted in the first page.

Yeah I read the 385 + shipping but I didn't see how much the shipping itself is...

[Mazworx_Sales]

Yeah I read the 385 + shipping but I didn't see how much the shipping itself is...

Residential or commercial?

[buckaroo]

lol my house, so residential

[Mazworx_Sales]

PM's replied Thanks!

[Mazworx_Sales]

PM's replied Thanks!

[BSPerformance]

6 point + x brace s13 hatch shipped to 19030 residential

[S14cagged]

I was wondering if could use the coupe version on my vert or if you guys have done any R&D for cages on verts

[Mazworx_Sales]

6 point + x brace s13 hatch shipped to 19030 residential

PM sent Thanks

[Mazworx_Sales]

I was wondering if could use the coupe version on my vert or if you guys have done any R&D for cages on verts

Probably not. We had a discussion with a customer before and we think they are wider than the convertible.

We havent had a convertible come by so we can take a measure. They are pretty rare around here.

[bradystrib]

wow i want one of these...not sure on the door bars though as i am bigger...arg. anyways, price on shipping to 30082 for the 6 point.

[S14cagged]

Probably not. We had a discussion with a customer before and we think they are wider than the convertible.

We havent had a convertible come by so we can take a measure. They are pretty rare around here.


Well in all seriousness here, i will send a deposit for one if you can get it measured and designed....

[Mazworx_Sales]

We've searched in our area and no one really has a convertible so dont think its going to happen.

[slideways2004]

S13 coupe full cage w/ x door bars. Labeled, pre-notched.

http://i597.photobucket.com/albums/tt51/mazworx/s13coupe_fmulad.jpg

i need a price for s14 shipped to business address 77089

i'm assuming this is a full cage with bars going thru the dash and x door bars?

[Empty_Pockets]

6 point S13 hatch shipped to 55304? No x. Thanks

[Inlandsilvia]

S13 coupe full cage w/ x door bars. Labeled, pre-notched.

http://i597.photobucket.com/albums/tt51/mazworx/s13coupe_fmulad.jpg



How much would it cost for a S14 full cage w/x door bars, labeled, and pre-notched. I am really interested and ready to buy.

[LegendDori]

6 point + x brace for an s13 hatch shipped to 75104 residential

=)

[Mazworx_Sales]

PM's replied Thanks!

[clain]

i'd drive down there and let you install and use my vert for testing purposes if I get to keep the cage :p

[sleeper108]

can i get a quote for a 4point w/ and w/o x-brace shipped to 87109 (business address)

s13 hatch

[D.Bo]

s13 coupe with no door bars shipped to 70131..thanks

[Mazworx_Sales]

can i get a quote for a 4point w/ and w/o x-brace shipped to 87109 (business address)

s13 hatch

4 point w/x-brace 575.00 shipped
4 point without 475.00 shipped

[Mazworx_Sales]

s13 coupe with no door bars shipped to 70131..thanks

510.00 shipped

[Mazworx_Sales]

PM's replied Thanks!

[scottie]

Any pics of the installed 10pt cage yet?

[Mazworx_Sales]

If you look through the thread, there's a link for pics

[drftmark]

http://img.photobucket.com/albums/v344/gsracer/Projectbacktobasics/IMG_6288.jpg


your strut tower brace plates do not look anything like the flat pieces pictured in the kit. I thought this was strictly welding work only required. How do you even go about bending those flat plates.

[Mazworx_Sales]

PM's replied Thanks!

[tougekid]

If these are fit and welded correctlly are they U.S.drift and Pro-Am legal??

[Mazworx_Sales]

More than likely yes. Only on the full cage though. Not the roll bar.

[Mazworx_Sales]

PM's replied Thanks!

[gsracer]

FYI mazworx roll bar passed d1 self tech with flying colors lol.

[sleeper108]

i already got a 4 pt quote, but was wonder what a 6pt without x-brace would be shipped to 87107 (business address)

[turbor1]

would it be possible to make provisions for removable door bars on a 6point for an s14?

[JohnnyDrfiter22]

Price For S13 Coupe with Power Sunroof 4-point shipped to 08052

[rbs14kouki]

price for a 4 and 6 point with x-brace (s-14) ship to montreal , canada (j7a3g7)!!!

[rbs14kouki]

interested !!!!! let me know ASAP please

[Mazworx_Sales]

price for a 4 and 6 point with x-brace (s-14) ship to montreal , canada (j7a3g7)!!!

4 point x-brace 425.00 + shipping (depends on residential or commercial)

6 point x-brace 485.00 + shipping (depends on residential or commercial)

[sleeper108]

6pt with x-brace to 87107 (business address)

[Mazworx_Sales]

6pt with x-brace to 87107 (business address)

660.00 shipped

[turbor1]

would it be possible to make provisions for removable door bars on a 6point for an s14?
any update?

[Mazworx_Sales]

No cannot make it. Sorry

[hotlavaflow]

S13 coupe full cage w/ x door bars. Labeled, pre-notched.

http://i597.photobucket.com/albums/tt51/mazworx/s13coupe_fmulad.jpg

How much is this shipped? $875?

[Mazworx_Sales]

How much is this shipped? $875?

That one is 825+shipping depending on residential or commercial location.

[Mazworx_Sales]

PM's replied Thanks!

[Mazworx_Sales]

PM's replied Thanks!

[240fixation]

you have a photo for this? AND SHIPPED TO HAWAII zip code is 96706

[BlazedGlory]

S13 Hatch w/ Sunroof:

How much does the x-brace weigh? Any input on how much it would stiffen a grip car?

[Buriantsu]

Ballerrrrrrrrrrr.

[Mazworx_Sales]

PM's replied Thanks!

[burninskulls0911]

how much for the 6 point installed?
im only about 2 hours away from you so bringing the car isnt an issue

[BlazedGlory]

PM's replied Thanks!

Didn't reply to my pm...

[Mazworx_Sales]

Didn't reply to my pm...

Prices are posted in the beginning of the group buy. Not sure how much the X-brace weighs

This is more of a safety item dont know if it will "stiffen" up a grip of the car.

[Mazworx_Sales]

PM's replied Orders shipped Thanks!

[burtoncr]

Well in all seriousness here, i will send a deposit for one if you can get it measured and designed....

We've searched in our area and no one really has a convertible so dont think its going to happen.

This guy is in Orlando
http://zilvia.net/f/wheels-tires/271841-fs-work-vs-mx-18x9-11-18x10-5-zero-5x114.html

[Mazworx_Sales]

PM's replied Thanks!

[Mazworx_Sales]

PM's replied Thanks!

[Mazworx_Sales]

PM's replied Thanks!

[nissankat]

Could you fix the pics on the first page please?

What does it cost to have you guys weld in the 4 point for me? 6point?

Do the door bars require the door panels to be modified?

Also what is the normal amount of time from placement of the order to the cage being ready for pick up?

Thank you

[Mazworx_Sales]

Please PM us for pricing :)

No door panels do not need to be modified.

2-3 days


Could you fix the pics on the first page please?

What does it cost to have you guys weld in the 4 point for me? 6point?

Do the door bars require the door panels to be modified?

Also what is the normal amount of time from placement of the order to the cage being ready for pick up?

Thank you

[420sx]

do you have the s14 8 point in stock?

[Mazworx_Sales]

Yes we have them instock because we make them :)

[JTunedMotorsports]

does anyone have a pic of the full cage with x-bars in a s13 coupe?

[JTunedMotorsports]

anyone with a s13 couple..pics of fullcage

[driftsilvias13]

I too would like to see pics of the FULL CAGE in a s13 coupe. Definitely interested.

[xxchurroxx]

how much is freight shipping to HI? residential or business 96701. thanks

[tougekid]

I would also like to see a full cage in a coupe. Door bars and all.

[Mazworx_Sales]

PM's replied Thanks!

[JTunedMotorsports]

still waitng on pics

[Mazworx_Sales]

We are not going to have every single pic available that you request. If we have pics they will be posted up on the first page.

[Grantspec]

Some local guys and myself contacted Mazworx to buy 5 total roll bars...Some s14 and some s13. We received all 5 within a week and a half of ordering. They provided great service and so far all of us have been happy with the final product

I just finished installing my basic 4 point into my s13 and it came out great. I was able to fit all my interior panels back in with a little trimming and persuasion. Here are some pictures.

http://i183.photobucket.com/albums/x207/Drummer0488/PA200161.jpg

http://i183.photobucket.com/albums/x207/Drummer0488/PA200163.jpg

http://i183.photobucket.com/albums/x207/Drummer0488/PA200165.jpg

Thanks Mazworx! :coolugh:

[driftsilvias13]

We are not going to have every single pic available that you request. If we have pics they will be posted up on the first page.

That is understandable but if you guys have fabricated the "formula d style cage", you should at least have some pictures right? Its easy to look at a 4pt roll bar kit and see how it should look once installed but it is kind of difficult for the the 8pt one.

This is a kit where people would like to see what it looks like installed so that they would know what to expect when purchasing it. Just my opinion.

[tougekid]

^I agree.. I would like to see the clearances of the main hoop to the B pillar/roof on the "Formula D Style" cage. If its on the first page and I don't realise it, then I apologize.

The "Formula D Style" cage should at least have some sorta photo to help the buyer decide if he/she is willing/wanting to go this route.

Some might buy it thinking its going to be ok for daily driving. Getting in and out multiple times a day with legit door bars has got to be a freaking pain. Some may not realise this with out a pic.

But with out a pic the buyer doesn't know.
just my 2 cents.

[Ghase]

Any discounts for Zilvia members???? I can use a 6 point for an S13 HB shipped to 11434.....

[Mazworx_Sales]

If you guys want pics of the formula d style cage, check out all of Enjuku's previous drift cars, those were all done by us here.

[JTunedMotorsports]

Im ordering mine today...I will post pics up soon for everyone when its done

[jlw778]

any cages for a vert. if not would you be interested in cutting a deal and using mine for messurement. im located in miami.

[Mazworx_Sales]

any cages for a vert. if not would you be interested in cutting a deal and using mine for messurement. im located in miami.


We can possible work something out

[Mazworx_Sales]

Update 'vert bars and cages will be available soon.

[Mazworx_Sales]

PM's replied Thanks!

[rb26man]

if i can get rid of my autopower i can get this

[Mazworx_Sales]

PM's replied Thanks!

[Mazworx_Sales]

PM's replied Orders shipped Thanks!

[JTunedMotorsports]

anyone complete the s13 mazworx coupe FD cage with X-Bars..Starting mine soon but wanted to see some pic of ppl's finished product.

[Mazworx_Sales]

PMs replied Thanks!

[Mazworx_Sales]

Here is a good reason why you shouldnt cheap out on roll bar/cages especially thinking about AutoPower ones.

The roof is flattened and the bottoms of the main hoop are through the floorboard.


http://i47.photobucket.com/albums/f174/JettaGLXVR6/mustangfail1.jpg

http://i47.photobucket.com/albums/f174/JettaGLXVR6/mustangfail2.jpg

[Mazworx_Sales]

PM's replied Thanks!

[HPballer76]

just thought i would put this in here.. love this kit!
http://i187.photobucket.com/albums/x28/hpballer76/DSC_0343.jpg

[Mazworx_Sales]

Looking good! What car was this in? Got any more pictures to share?

[fckillerbee]

I'm sure this has been covered (not gonna read all pages sorry)....how much for instal.

bumpity bump.

[Mazworx_Sales]

We are running a special right now for 6 point installed for 1100.00 but it seems like your located in So Cal so that may seem a little far LOL

[BlazedGlory]

I've never installed any sort of cage before, so maybe I am doing something wrong... but, how tall is the S13 pre-welded roll bar section supposed to be? Either I am going about getting it in the wrong way, or this thing is a couple of inches too tall. Am I supposed to have to trim it down to fit? Damn, I thought I was going to get it all tacked up at least today =/.

EDIT: I tried removing both seats completely and putting it in the other way before I measured the height of the bar around 44" and it looks like with some VERY heavy persuasion I only have about 42" to work with...

[BlazedGlory]

I received 6 flat 6"x6" plates for my 6 pt. bar... They are not bent to fit in 1 shot like mentioned. Just from looking at it I am definitely going to have to bend the plates for the rear strut towers at the very least.

EDIT:

Plates properly bent to fit in 1 shot. Before I read that first post again I was just planning on tacking these particular plates top and bottom then hammering in the sides to contour to the towers. Not a huge deal, but why advertise them as being pre-bent?:
http://farm3.static.flickr.com/2038/4510602085_056b115f8e_o.jpg

Someone please tell me if I am doing something wrong here. Did anyone else have to cut theirs down to fit? Perhaps I have some oddball 240SX that has a shorter cabin...
http://farm5.static.flickr.com/4027/4510602125_69de5390ce_o.jpg

[titangts]

hummm.... did someone say the roll bar passed Pro-am tech?!?! if so im so down for the 6 point

[BlazedGlory]

I just got off the phone with Mazworx and I was told the plates ARE NOT supposed to be pre-bent like it is advertised in the original post. Also, the main hoop behind the seats is not supposed to fit in one shot like is advertised in the first post. It is left long so you can cut it how you want.

I RECEIVED NO REAL EXPLANATION WHY IT IS BEING ADVERTISED AS A ONE-SHOT INSTALL WITH NO FAB WORK INVOLVED!

Edit: Thanks for the original post edit AFTER I've already made the purchase... I felt like a criminal when I called and was told I was the first one who has ever complained about this... Good excuse to misadvertise a product. I have to be honest I kind of expected at least some sort of partial refund... I was told that S&W does not use DOM in their roll bars, and that is why they are cheaper (in addition to them not fitting as well, but I can't say if they fit well or not. I'm sure Mazworx cannot say either if they don't even know what tubing they use). After a quick google search I found S&W makes an 8 point bar with the exact same tubing (1 3/4" .120" DOM)... I'll let you guys search for that price...

[NismoTuner21]

Would you guys be interested in doing cages for Z32's? I need one and the only options we have are gay Autopower peices of shit.

[Mazworx_Sales]

PM's replied Thanks!