PDA

View Full Version : IL Fully Built Sr20det AEM EMS OS GIKEN LOTS OF PARTS!!!

nismokid
02-12-2009, 07:59 PM
i have lots of stuff to get rid of. starting a new build. here are my parts.

ALL PRICES ARE OBO!!!
NO LOW BALLING!! I JUST WANT TO SELL MY PARTS. PLEASE KEEP YOUR NEGATIVE COMMENTS TO YOURSELF!!! THANK YOU!!!

IF YOU WANT TO BUY IT ALL OR A COMBO OF PARTS I CAN WORK ON THE PRICES!!! I CAN BE CONTACTED AT 847 847 8674 OR EMAIL [email protected]

BLOCK AND HEAD ARE TOGETHER STILL. IF YOU LIKE BOTH I WILL LEAVE TOGETHER. THANKS

Short Block- $3000 (10 Min Of Idle Time)
Darton Sleeves
CP 9:1 89mm Pistons
Crower Rods
Lightened and Balanced Crank
Then Rotating Assembly Was Balanced Internally
Clevite Bearings
ARP Main Studs

Cylinder Head- $1300
Tomei Valve Springs
Toda Cam Gears
Tomei Solid Lifters (Shimmed By Mazworx)
HKS 264 Step 3 Cams
Crower Retainers
ARP Cam Bolts
Light Port And 3 Angle Valve Job

Parts-
USED ARP Head Studs $75
Greddy Oil Pan $SOLD
ATI Dampener $SOLD
OS Giken Twin Disc W/ Through Out Bearing $450
S13 Trans W Nismo Pivot Ball and Short Shifter $SOLD
AEM EMS 1601U W/ AEM Air Intake Temp Sensor/ AEM 3.5 BAR Map Sensor/ And AEM Boost Solenoid $1250 (USED But Worked Flawlessly)
HKS Twin Fire Ignition $250
Nismo Slave $SOLD
JGY Fuel RAil W/96lb. Injectors $225
Knock Off Greddy Intake Manifold W/ Q45 Throttle Body $325
Polished Valve Cover $125
Powder Coated Black Valve Cover $40
NEW Front Cover $180
USED Front Cover W/ New Front Main Seal $65
NEW 90mm Mazworx Head Gasket $180
Coil Packs $50
Upper Oil Pan Ground Down For Main Stud Clearance $50
Sr20det Starter (Works) $SOLD
Sr20det Alternator W/ Bracket $50
Black Top Oil Pickup $20

http://i236.photobucket.com/albums/ff115/bsj21/DATSUN%20SR240Z/Picture036.jpg

http://i236.photobucket.com/albums/ff115/bsj21/DATSUN%20SR240Z/Picture030.jpg

http://i236.photobucket.com/albums/ff115/bsj21/DATSUN%20SR240Z/carandtruck049.jpg

http://i236.photobucket.com/albums/ff115/bsj21/DATSUN%20SR240Z/carandtruck043.jpg

http://i236.photobucket.com/albums/ff115/bsj21/DATSUN%20SR240Z/carandtruck059.jpg
jr_ss
02-12-2009, 08:24 PM
ATI, I would like some pictures and then pending them I'm calling dibs... Paypal waiting... I'm pming you..
chris300zr
02-12-2009, 08:24 PM
os giken clutch- how much life left?
clever240sx
02-12-2009, 09:21 PM
Ugh! Ive got a grand to spend on a block! And your so close! Want to take cash and trade for my wheels?:)
nismokid
02-13-2009, 05:42 AM
os giken clutch- how much life left?

would need a rebuild shortly. i had no problems when i was making 410rwhp and 344rwtq at 21psi in my s13. i will even throw in the nismo slave.
SuperiorS14
02-13-2009, 08:26 AM
accepting any trades for the ati damper?
nismokid
02-13-2009, 01:23 PM
accepting any trades for the ati damper?

sorry no trades on it. just need the cash.
vespaman
02-13-2009, 01:47 PM
pm sent about the oil pan
jr_ss
02-13-2009, 04:05 PM
Need paypal addy to send money for the ATI and Greddy OP.
nismokid
02-13-2009, 07:15 PM
Need paypal addy to send money for the ATI and Greddy OP.

email sent!
jr_ss
02-13-2009, 07:45 PM
Sent the funds my friend...
havenaz
02-13-2009, 08:01 PM
Ill take the starter. Pm me paypal info and price shipped to az 85310.
nismokid
02-14-2009, 09:31 AM
parts are updated. here is my first bump. somebody needs a fully sleeved and built motor. i know it.


or how bout an aem ems with 3.5 bar map sensor, uego gauge, air intake temp sensor, with aem boost solenoid. comes with brand new wide band sensor. only 1250 shipped.


the clutch will need rebuild soon. havent had a problem with it and it held 410rwhp and 344 rwtq just fine!!!
nismokid
02-15-2009, 09:25 AM
come on guys need this stuff out of here! I know you guys need some go fast parts!!!!!
flawless
02-15-2009, 09:40 PM
hey whats left?
nismokid
02-16-2009, 06:18 AM
everything that doesnt say sold. i cant believe that only three things are sold. come on guys. no body needs these parts?
JDMtyteYO!
02-16-2009, 09:18 AM
i want the block and head....but i wont be getting any money till i sell my motorcycle. grrr decisions decisions...

edit....and fuel rail with injectors...
TJM
02-17-2009, 06:52 AM
Bump for some great deals! Awesome seller!
nismokid
02-17-2009, 06:50 PM
late night bump. some other things are sold. come on guys. will work out the prices
racerx2k1
02-17-2009, 07:30 PM
email sent!

parts are updated. here is my first bump. somebody needs a fully sleeved and built motor. i know it.


or how bout an aem ems with 3.5 bar map sensor, uego gauge, air intake temp sensor, with aem boost solenoid. comes with brand new wide band sensor. only 1250 shipped.


the clutch will need rebuild soon. havent had a problem with it and it held 410rwhp and 344 rwtq just fine!!!

come on guys need this stuff out of here! I know you guys need some go fast parts!!!!!

late night bump. some other things are sold. come on guys. will work out the prices

2 bump limit. You can start new thread in 3 days.