Z32 MAF + Emanage + Redtop

[BlackZenkiS14]

Ok, so i tried searching, but because it wont let you search for anything less than 4 letters, the terms 'MAF' 'Z32' are unsearchable. No help, didnt find anything.

So Im going to finally install my Z32 MAF in my Redtop, and i have an Emanage.

What do i need to do in the Emanage, to make that work properly?

[s13.dark1]

http://zilvia.net/f/chat/165576-new-240sx-bible-vol-2-unifinished.html

everything you might need and then some.

[BlackZenkiS14]

I looked through there, and help me out if im retarded, but i couldnt find a link to the info i was searching for.

[BlackZenkiS14]

Can anyone help me?

Gotta be someone out there with experience doing this. I cant be the only one.

[BlackZenkiS14]

Anyone? Seriously. Im the only guy running a Z32 with my Emanage?

[slider2828]

Come on dude! Change the settings so it says N62 mafs.... Wire the bitch up and go or better yet read the f...ing Greddy Software Manual. If you don't have the software then good luck, cause you can't change it.

If you want I can sell you my ENTIRE SETUP with N62 (Z32) Mafs, Software, Optional Ignition and Injection Harness, with a Tune for 600cc injectors, HKS 264 cams, and Genuine Greddy Software with Cables for 400. (For Redtop)

[droptoprx-7]

a safc could change the settings but better yet retune

[BlackZenkiS14]

I already have it wired up and running in my car properly for a stock MAF, I am wondering if I have to change the settings in the software, or with the switches on the side of hte ECU? I have a Emanage Blue, NOT ultimate. Does anyone have a link to the users/software/setup manual in PDF format online?

[nosanhere]

Greddy - Founded and Driven by Racers (http://www.greddy.com/tech/)

[slider2828]

You don't need to retune for Emanage hence > SAFC....

I think you can use the dip switches, but wouldn't try. Software is not free....

[BlackZenkiS14]

thanks. I already have the Greddy Support Tool software, and have tuned my car proficiently with it for the past year.

[S13 curtis]

i run the map sensor & slider2828 runs the z32 maf. i think he can help you out, and if you tuned your car and it still dosent run right either u have a shitty maf or you need somebody else to tune it.

[BlackZenkiS14]

i run the map sensor & slider2828 runs the z32 maf. i think he can help you out, and if you tuned your car and it still dosent run right either u have a shitty maf or you need somebody else to tune it.

lol my car runs great, I have a good tune on the stock MAF, i havent put the Z32 in yet.

[slider2828]

like I said just change to n62

[xplicit240]

yes there is a drop down menu for that setting. if you cant find it just call them. they will help you.

[BlackZenkiS14]

like I said just change to n62

Ok Good, so i dont have to worry about any of the rotary dials on the side of the Emanage its self.

Well that'll be easy then, just to select it from the drop down menu.

[BlackZenkiS14]

Well thanks for hte help, those of you that actually helped. We put it in this weekend.
It was really easy to do, and the car runs great,

cutting pipes and piecing it together
http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965487_7709524.jpg

http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965488_4998200.jpg

mocking up
http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965493_1297309.jpg

http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965494_3824709.jpg

http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965496_4484956.jpghttp://photos-c.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965498_1306319.jpg

http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965499_1506793.jpg

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965501_5644911.jpg

http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965502_4502500.jpg

http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965504_7022795.jpg

http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965511_6885302.jpg

http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965512_8290361.jpg

http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965513_858882.jpg

We didnt have any clamps to get home with, so Zipties worked until i got ahold of some clamps
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965518_7495236.jpg

http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965519_4368927.jpg

Finally got clamps and finished it up!
http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965522_1513736.jpg

http://photos-d.ak.fbcdn.net/photos-ak-snc1/v2391/49/110/635255042/n635255042_5965523_5708306.jpg