Need help identify plug

[LeonL]

Hi guys. I am putting my engine back together and have no idea where this plug goes? It is suppose to be one of the plug together with the TPS, water temp, ground, and this "grey" plug. I have attached picture of it, the one I am pointing at. Thanks in advance.

http://i5.photobucket.com/albums/y172/leonl/Engine%20Replacement/Picture011.jpg
http://i5.photobucket.com/albums/y172/leonl/Engine%20Replacement/Picture010.jpg
http://i5.photobucket.com/albums/y172/leonl/Engine%20Replacement/Picture009.jpg
http://i5.photobucket.com/albums/y172/leonl/Engine%20Replacement/Picture013.jpg

[rotarywar]

is the big plug

[importdude]

that should be for the knocksensor

[LeonL]

that should be for the knocksensor

I an thinking it may be the knock sensor, but the knock sensor is already plugged in at the back of the motor. I will double check that, I may have plug it to the wrong place.

Thanks for the suggestions.

[importdude]

You have it wrong forsure
that front one is Knock

the rear one it has the same plug but its for some emission crap

i know b/c i removed my emission and i have a plug like that laying there


the knock sensor wire -from the sensor itself should snake up to the front and be bolted to 1 bolt from the Timing Cover

http://bayimg.com/image/danffaabh.jpg

[LeonL]

Thanks for the diagram. I will re-wire the plug tomorrow. I did removed the emission parts, so I guess that is the plug for the emission.