Z32 aluminum caliper torque specs?

[Devens240]

putting my 30mm aluminum calipers back together and wondering what i should torque the 4 bolts to that bolt the two halves together too. also what about the rear z32 brake torque specs? thank you
Deven

[420sx]

just tighten them by hand to snug and finish with a wrench to where it is tight and put thread lock on the bolts too.

[Rittmeister]

No one lists those torque specs (I was unable to find them) - the FSM states that you shouldn't disassemble the calipers, so the torque specs aren't stated.

You also can't order the bolts, or the o-rings that seal the fluid passages, from Nissan. They're just not availabe separately from buying an entire caliper.

[97nismo]

You also can't order the bolts, or the o-rings that seal the fluid passages, from Nissan (http://zilvia.net/f/tech-talk/239096-z32-aluminum-caliper-torque-specs.html#). They're just not availabe separately from buying an entire caliper.

wrong you can buy the bolts from courtesy nissan, just not the o-rings that go between the halves.

local nissan dealers will not have anything

[Rittmeister]

Courtesy sells them? What's the part number? We're talking about the bolts that hold the two caliper halves together. I did exhaustive research not long ago on that very subject and came up dry. When I called Courtesy they told me they couldn't get them.