s14 guys.. show me pics of your rear strut bar setups :) ..need ideas for mine

[silviakid2790]

need ideas on how to run my rear cusco in my s14. id like to see how you guys cut the metal cover thing in the back

[projectRDM]

There's only one way to install it, what idea did you need? And you do NOT cut any metal at all, period. There's no modifications required to install it. Bolt in and tighten.

[((sr)) kelly]

huh? this is for s14, not s13..... s13s do bolt in, s14s have a metal shroud kind of thing that MUST be cut

bump for muh rooom mate

[palmdale_mob]

There is a picture request thread

[LA_phantom_240]

huh? this is for s14, not s13..... s13s do bolt in, s14s have a metal shroud kind of thing that MUST be cut

bump for muh rooom mate

No. Total fail. I have a Cusco OS. It fits fine, you just gotta flip the rear seat down and have a look. Its tough getting it in there at first, but that's it.

[EDacIouSX]

huh? this is for s14, not s13..... s13s do bolt in, s14s have a metal shroud kind of thing that MUST be cut

bump for muh rooom mate


wtf are u guys like retarted or something. there's two types of rearstrut bars for S14s. one that goes through the pass through behind the seat and another that goes up and over the rear deck... explain to me WHAT do you have to cut??? sounds to me like you guys tried to install the underpass cusco strut bar upside down....

epic FAILURE



http://media.urbandictionary.com/image/page/fail-58619.jpg

[projectRDM]

huh? this is for s14, not s13..... s13s do bolt in, s14s have a metal shroud kind of thing that MUST be cut

bump for muh rooom mate

Absolute fail. I've had a Cusco rear bar since 1998. There's two slots on the shock tower, towards the front of the tower. The endplates slide right through them. You do have to twist it in place, they don't just fall in, but if you start with it pointing down and turn it as it drops it goes in fine. It helps to have the shock out so you can clear the top studs coming through, but it's not required.

The Nismo bar goes above the deck, and obviously you have to cut the rear deck cover to fit it. I have both bars on my car.

[Marcus]

lol at this thread. i smell deep fried fail fries.
http://i286.photobucket.com/albums/ll110/samaniego_ms/rearstrutbar.jpg

[Bigsyke]

Id suggest ditching the Rear STB anyway and getting a set of solid subframe bushings instead.

[projectRDM]

Id suggest ditching the Rear STB anyway and getting a set of solid subframe bushings instead.

Why? the STB does it's job well for the chassis. The subframe is a completely independent part, benefiting from it's own upgrades.

[bigOdom1]

id like to see how you trimmed the cover on the upper part for the s14. i have the carbing rear bar for above and have just ditched the speaker cover because it wouldn't fit below

[PITCH]

http://www.acurainspired.com/gallery/data/16e6a3326dd7d868cbc926602a61e4d0/full_2015_p44885.jpg

Mine was reversed. You had to cut the wall of the shock tower to mount it this way.

[deuceforty]

i would never EVER cut the wall of the shock tower just to mount a bar...

thats idiotic

[projectRDM]

id like to see how you trimmed the cover on the upper part for the s14. i have the carbing rear bar for above and have just ditched the speaker cover because it wouldn't fit below

The Nismo bar comes with plates to cover the holes once cut, they're square with slots for the endplates to come through and then screw to the deck with small screws. You could easily duplicate them with a piece of sheetmetal or even ABS plastic.

[bkfill]

i didnt have to cut anything in my s14 to install cusco rear strut bar
mine gos under the hatshelf(rear deck)

[projectRDM]

i didnt have to cut anything in my s14 to install cusco rear strut bar
mine gos under the hatshelf(rear deck)

All Cuscos do, as well as 99% of the knockoffs found online. The Nismo, Avanche, and Carbing go over the deck.

[((sr)) kelly]

ohhhhhhhhhhhhhhhhhhhh damnit!

i wanted to install the cusco 3 pt rear sturt bar out of my s13 into my kouki but looks like thats not going to happen.. fack!

ill just sell it and get a strut bar thats actually for a s14

[garagelu]

The JIC MAGIC rear strut bar goes over as well, which is what I have. I don't see what is so difficult about installing a strut bar.

[hunter8411]

I installed a Tanabe rear strut bar that goes over a while ago. I cut the speaker cover because I still wanted to keep it in there. Here are some quick pics of how I have mine.

I guess there are 2 types of speaker covers, one with the BIG metal speaker covers, and the one with the small metal speaker covers, I had the BIG one.

I ended up measuring and cutting holes in the metal covers with a dremel, then bought some leather from a crafts store and cut then hot glued it to the cover. I like the outcome, even though I am not fond of the red strut bar.

http://i15.photobucket.com/albums/a356/hunter8411/IMG_0852.jpg
http://i15.photobucket.com/albums/a356/hunter8411/IMG_0848.jpg

[unlegendary]

ohhhhhhhhhhhhhhhhhhhh damnit!

i wanted to install the cusco 3 pt rear sturt bar out of my s13 into my kouki but looks like thats not going to happen.. fack!

ill just sell it and get a strut bar thats actually for a s14

so you had to embarrass your home boy for asking a dumb question FOR YOU? what kind of friend are you?

[g6civcx]

Another option would be to weld the two strut towers straight to each other.

[projectRDM]

I installed a Tanabe rear strut bar that goes over a while ago. I cut the speaker cover because I still wanted to keep it in there. Here are some quick pics of how I have mine.

I guess there are 2 types of speaker covers, one with the BIG metal speaker covers, and the one with the small metal speaker covers, I had the BIG one.

I ended up measuring and cutting holes in the metal covers with a dremel, then bought some leather from a crafts store and cut then hot glued it to the cover. I like the outcome, even though I am not fond of the red strut bar.

http://i15.photobucket.com/albums/a356/hunter8411/IMG_0852.jpg
http://i15.photobucket.com/albums/a356/hunter8411/IMG_0848.jpg

Zenki base models and all Kouki models have the small, round plastic grilles, Zenki SEs got the larger metal grilles. I took my speakers out of the rear deck, moved them to the quarter panels, and bought a base deck cover without speaker holes for a cleaner look. I then wrapped it in black vinyl, looks better and easier to clean that that carpet they use.

You can always powdercoat the bar another color. Red would bother me too.

[chuonthis]

FYI, I think this isn't posted in many places but the Greddy bar goes under the deck like the Cusco ones. Greddy 14023010 GREX Triple Tube Rear Strut Tower Bar S14 (http://www.frsport.com/Greddy-14023010-GREX-Triple-Tube-Rear-Strut-Tower-Bar-S14_p_1551.html)

[Colorado S14]

I have the Greddy bar and it goes under the rear deck which I like. The above the deck ones do not look that great IMHO. Of note, I did not feel a huge difference with the rear bar, make sure that you get the rear subframe spacers too, I felt more difference with those.

[DJ_Sunrise]

Is anyone using Tein's strut bars on the s14???

I was thinking of using a DC sports front on my car, and tein rear. I like the RC sport because it is solid weld. Goot knock off of the ARC. Holla!

-Bart

[neverrain]

Is anyone using Tein's strut bars on the s14???

I was thinking of using a DC sports front on my car, and tein rear. I like the RC sport because it is solid weld. Goot knock off of the ARC. Holla!

-Bart

I use the Tein Front and Rear on my s13 and they are fantastic. Quality is good.

I'm not really sure if this is a quality question or a specific s14 bar question though.

[EDacIouSX]

just out of curiosity, did anyone feel any difference with the nismo strut bar or similar types that go above the rear deck? I don't know many people that have a s14 and rock quality rear strut bars

[rb25crazy]

i got a cusco that goes under the speakers. it's not a hard install, just kinda cumbersome b/c of the cramped spaces. also nothing has to be cut if you install the strutbar that goes under the speakers, mine came in 5 pieces, 2plates, 2 more plates and a bar. you just need to install each one at a time can;t just toss it all in at once like a front strut bar. honestly, i don't really notice anything different lol... i just like the look of it. then again i don't drive my car like i stole it. i don't have a rear sway bar, but i do notice that when i turn harder the car goes back to a level position faster. but, i have coilovers now as well, so i can't say if it's b/c of the coils or a combo of coil n strut bar.

[laurentj23]

anyone install the ebay ones? im having a hard time fitting the brackets into the holes.

[slydin240sx]

Is anyone using Tein's strut bars on the s14???

I was thinking of using a DC sports front on my car, and tein rear. I like the RC sport because it is solid weld. Goot knock off of the ARC. Holla!

-Bart

I have a Tein rear strut bar on my s14. I like it a lot!!

anyone install the ebay ones? im having a hard time fitting the brackets into the holes.

Well that's your problem, it's eBay garbage!

[laurentj23]

I have a Tein rear strut bar on my s14. I like it a lot!!



Well that's your problem, it's eBay garbage!


Well FU! I got a deal for front,rear lower and upper. If you have nothing good to say than don't reply. ass!

[slydin240sx]

Well FU! I got a deal for front,rear lower and upper. If you have nothing good to say than don't reply. ass!

LOL don't be mad at me cause your eBay garbage don't fit correctly.

[laurentj23]

LOL don't be mad at me cause your eBay garbage don't fit correctly.

Im not gonna waste my anger on some retard sorry! you fail.:blah::smash:

[slydin240sx]

Im not gonna waste my anger on some retard sorry! you fail.:blah::smash:

No you fail bitch! Keep shopping on eBay! :D

[laurentj23]

No you fail bitch! Keep shopping on eBay! :D

Oh Ill. At least I don't spend more than 50 bucks buying some tein crap that has the same function as my ebay crap...let's see who the retard is? Oh wait it's you!

[slydin240sx]

Oh Ill. At least I don't spend more than 50 bucks buying some tein crap that has the same function as my ebay crap...let's see who the retard is? Oh wait it's you!

I didn't even buy it! It came with my car. Aye at least my shits fits though. Now go make me a sammich and stfu!

[WIKID S4TEEN]

Both of you fools are acting like you're 10 yrs younger. Seriously. ^ that s14 looks familiar, did you buy it from someone in L.A.?

[Agamemnon]

anyone install the ebay ones? im having a hard time fitting the brackets into the holes.

You bumped a 3 year old thread to ask that?

[jr_ss]

Yep, geniuses abound on this website. Next time he'll spend money on quality parts instead of being a bandwagon hack...

[Om1kron]

Oh Ill. At least I don't spend more than 50 bucks buying some tein crap that has the same function as my ebay crap...let's see who the retard is? Oh wait it's you!

You raised a 3 year old thread to tell this whole website your dumb ass couldn't bolt on a bolt on part and you're calling people retard? :picardfp:

[BryanS14]

You raised a 3 year old thread to tell this whole website your dumb ass couldn't bolt on a bolt on part and you're calling people retard? :picardfp:

:rofl:

classic

[slydin240sx]

Both of you fools are acting like you're 10 yrs younger. Seriously. ^ that s14 looks familiar, did you buy it from someone in L.A.?

Nope, I bought it off of someone in Missouri.

You raised a 3 year old thread to tell this whole website your dumb ass couldn't bolt on a bolt on part and you're calling people retard? :picardfp:

She's a smart cookie!

Wonder what she looks like? lol

[laurentj23]

You bumped a 3 year old thread to ask that?

At least I use the search function instead of making a seperate thread. Now is there anyone that have the answers instead of all these retards?

[laurentj23]

You raised a 3 year old thread to tell this whole website your dumb ass couldn't bolt on a bolt on part and you're calling people retard? :picardfp:

If i know how to bolt it on, i wouldnt ask the question do I?

[slydin240sx]

At least I use the search function instead of making a seperate thread. Now is there anyone that have the answers instead of all these retards?

If i know how to bolt it on, i wouldnt ask the question do I?

http://zilvia.net/f/chat/297481-small-questions-thread-search-first-use-instead-making-new-threads.html or bumping 3 year old ones!

[KoukiMonsta]

buy my legit bad ass cusco one

[fliprayzin240sx]

Fuck, are they really both 27 yrs old?