Bee R rev limiter help??/

[lilaznjeff]

does any one have a bee R rev limiter, i want to know how to set the limiter.
first of all i have a s15 sr20det and i trying to use this bee R. according to the instruction i hooked up right on the wiring.

if i want to set my rev to 3k. to back fired.
how would i set that

on rev 1 ( red knob )
on rev 2 ( white knob )
gain ( yellow knob )

[SpdElemts]

Rev 0 = 2,500 rpm
Rev 1 = 3,000 rpm
Rev 2 = 3,500 rpm
Rev 3 = 4,000 rpm
Rev 4 = 4,500 rpm
Rev 5 = 5,000 rpm
Rev 6 = 5,500 rpm
and so on...



edit:

and for further information all you had to do was google.
■OPERATING RPM (作動回転数)
ＲＥＶ１・２のつまみの数字を変える事により設定回転数を選ぶ事が出来ます。
The operating range can be set and adjusted using the REV1 or REV2 dial switch.
Setting 0…2500rpm, Setting 1…3000rpm, Setting 2…3500rpm to Setting F…10000rpm maximum
with maximum with 500rpm increments

http://www.bee-r.com/english/revlimitter/instruction.htm

[lilaznjeff]

i think i might got the wiring wrong but. it still lighted up n everything,
does anyone know what is the

green and yellow wires are for....

[OBEEWON]

Just smash your engine to pieces now.

[Z33dori]

Just smash your engine to pieces now.

why

Sr will live with Bee*r as long as you don't sit there on it forever ... i won't recommend it for 2 step launch at the strip...

[3AM]

if its not working try swapping the green and yellow wires, most of the bee*r diagrams have it wrong.