Harmonic balancer pullers help

[Wazawai]

I'm looking for harmonic balancer pullers, I'm doing a timing chain job on my ka24de and I need to do some maintainence on my sr20. The puller I have doesn't fit. So, my question, does anyone know where I can get the puller or pullers for these specifically or nissan engines. Any info would be a big help.

Thanks
~Wazawai~

[Monooxide]

You can buy pullers from any hardware store and your local automotive stores. Just find one that has a range that includes diameter of the OEM Pulley.

[SochBAT]

Ghetto Style!

I changed my pulley and used a flathead to pry slowly.

[supreme_1]

make sure you have the installer tool as well, DO NOT HAMMER IT ON

[SochBAT]

It should just slide back on. Watch out for the notched piece that sits on the crank itself. It's a bitch to realign and takes forever if you mess it up.

Ghetto Version!

Remove FP fuse.

throw the socket on the nut and wrench with long breaker bar

Put a tire between the wrench and breaker bar.

Crank the engine once.

Nut is loose!

[supreme_1]

are those things really loose? i would think it should need to be pressed on with a tool. if its loose thats kinda dangerous. im just speaking from experience from working with chevys

[SochBAT]

No, they sit really snug. It does take some persuasion to get the pulley off w/o a puller, but can be done. The biggest thing to watch for is that damn notched piece. Such a PITA.

[BigVinnie]

I'm looking for harmonic balancer pullers, I'm doing a timing chain job on my ka24de and I need to do some maintainence on my sr20. The puller I have doesn't fit. So, my question, does anyone know where I can get the puller or pullers for these specifically or nissan engines. Any info would be a big help.

Thanks
~Wazawai~

Do you have a pic of the puller that you tried to use?