Trying to make a Manual TPS work on a Automatic Loom.??? Possible to hardwire?

[Teambadrun]

Does anyone know?

We just did an SR conversion on a mates car, but realised the loom we have is a Auto trans loom ( running a manual ECU )

However the TPS is a manual version, so it has less pins.

How can we hardwire this to work to our automatic loom plug for TPS?

Thank you!!
Alex

[bmx22]

i had the same problem, had to de pin the plug and plug in each wire individually i for get wich 3 collors it is ,i think black was the middle one..........every couple days it would disconect and i had to tape it in place. so i got a tps plug from a sentra ser 91 i belive and spliced it and its perfect. the ser plug is the same as the sr works great..you can plug each wire in just to get it running .good luck

[Teambadrun]

"Use a TPS off of a B13 Sentra SER with an SR20DE. It is the same as the SR20DET. If you want to keep the auto TPS you can but try rewiring it to how a manual would work.
So you keep the white wire, black wire, splice the light green wire and red wire together, and get rid of the yellow (?), and blue wire(?)."


Quotes from NICO CLUB lol...
i hope this works

Thanks guys