View Full Version : S14 SR trannny on S14 KA
MAXIMUS_PR
01-19-2009, 06:59 PM
can i use a S14 SR tranny on a S14 KA if so what needs to be done,some people say that by changing the bell housing i would be able to do it,if this is true would the KA auto bell housing tranny fits.Has anyone done this?
Ninjabread
01-19-2009, 07:30 PM
You can use the SR tranny with the KA manual bellhousing, but honestly, just sell that SR tranny for 200+ and buy a KA tranny for 20$.
MAXIMUS_PR
01-19-2009, 07:39 PM
i wish i can find a KA tranny for $20 i been searching for a while with no luck
Chad4061
01-19-2009, 07:39 PM
yea you better hope your ob1 cause good ob2 trannies are getting harder to find
MAXIMUS_PR
01-19-2009, 07:41 PM
yea you better hope your ob1 cause good ob2 trannies are getting harder to find
ob2.........
Chad4061
01-19-2009, 07:44 PM
swapping the bellhousing will work for the SR tranny so if you can find a ob2 bellhousing then go for it.
MAXIMUS_PR
01-19-2009, 07:47 PM
swapping the bellhousing will work for the SR tranny so if you can find a ob2 bellhousing then go for it.will the auto bell housing fits?
Ninjabread
01-19-2009, 07:54 PM
No it wont.
And as far as I know, that sensor on top of the tranny doesnt do anything.
My s14 was converted and it runs fine without.
Banegraphix
01-19-2009, 08:12 PM
i have a KA tranny if you want it let me know the tranny its self is a s13 but the bellhousing was left over from when i put a s14 tranny on my SR
MAXIMUS_PR
01-19-2009, 11:19 PM
one more thing are the S13 and S14 manual tranny harness the same?
my S14
01-20-2009, 09:14 AM
i have a 95 s14 obd1 and i want to put a mt in do i have to use just the 95 obd1 tranny or can i us a s13 tranny, can i use an obd2 tranny, do i have to get the wire harnesses
projectRDM
01-20-2009, 09:26 AM
one more thing are the S13 and S14 manual tranny harness the same?
No. Switches are different per chassis, but they all swap between cases.
Ninjabread
01-20-2009, 09:36 AM
Here's what I did to make it simple for you...
-S13 manual transmission
-Install s14 speed sensor along with wiring for it (came from my AUTO tranny)
-Reverse lights, I spliced the s14 auto wiring into the s13 sensor on the tranny.
That's all I used on there. Wrapped that up with my lower engine harness, did the bypass for the park/neutral switch, and voila everytihng works.
Now, I did get error codes, but they all pertained to the missing sensor readings and they in no way affect how the car drives.
my S14
01-20-2009, 10:28 AM
so what your telling me is that i can take an s13 tranny bolt it up, swap out my s14 speed sensor from my current tranny, spice the harness for the reverse light and down.
Ninjabread
01-20-2009, 10:35 AM
Yes sir.
abhdflal sdbf
Monooxide
01-20-2009, 10:36 AM
S14 SR Transmission has better drain baffling in the transmission in comparison to an S13 KA24DE transmission that you'd probably find, Im not even sure if the S14 Zenki KA transmission has the updated baffles.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.