Project Mu adjustable height camber plates

[drift freaq]

yup want to adjust the height of your setup from the camber plates then you want these. Now I have been asked this question before and had smart asses come in the thread and debate this. I do not want that here. They do adjust your ride height up or down by around 1 inch. If you want them speak up if all your going to do is debate then shut the fuck up.

These cost me $195 I bought them thinking I was going to use them I did not here is your chance to get a Dope set of Pillowball camber plates. $195 is what I want for them. shipping would be $15

[Venice]

Not to be a dick but can you show or explain how they are height adjustable i have never seen or heard of these (not cusco but the adjustable part) . I might be interested .Also in the pic it looks like you have the rears or 3 fronts are the rears included . Just questions i have .

[SHIFT_*grind*]

Careful asking questions, you'll get called an asshole.


Other pictures of the same product are here. (http://zilvia.net/f/sale-items/216420-project-mu-dura-pillow-adjustable-front-camber-plates-s13-14-a.html) You can see how the upper mounting point for the strut threads up further into the camber plate, effectively compressing the spring and lowering the car further.

It would be fronts only, Project Mu doesn't make height adjustable rear plates.

Good price.

[drift freaq]

Careful asking questions, you'll get called an asshole.


Other pictures of the same product are here. (http://zilvia.net/f/sale-items/216420-project-mu-dura-pillow-adjustable-front-camber-plates-s13-14-a.html) You can see how the upper mounting point for the strut threads up further into the camber plate, effectively compressing the spring and lowering the car further.

It would be fronts only, Project Mu doesn't make height adjustable rear plates.

Good price.

LOL more like reading fails him. Oh and I am about to edit not to call them assholes but the fact is its a forsale thread not a lets debate the merits of a product thread.

[drift freaq]

back on up for these.

[drift freaq]

last time up for these.

[brokeAs240sx]

You can see how the upper mounting point for the strut threads up further into the camber plate, effectively compressing the spring and lowering the car further.

Just to clear these up for any interested buyer thinking this will allow the car to go lower - it doesn't.

I've had a pair (the KTS ones). When the middle section is threaded up all the way - this is normal coilover height. When the middle section is thread down, it raises the coilover height; this can be done w/o needing to take off the wheels (just jacking up the car a bit).

This is very handy for those who have coilovers that are very low & want more clearance - either for daily driving or for jacking up the car by the crossmember easier.

[Venice]

How does reading fail me cause i asked a question .Like i said I have never heard of these type of pillow mounts .And as far as not knowing if they made height adjustable rears if you look in the pic theres 3 of them . I asked if he had rears because i'm looking for all 4 . So before you come back with a smart ass remark about what i posted good luck with your sale and being a fucking dick. Have a nice day...

[FaLKoN240]

Wahhhhhh go cry about it.

He said what he is selling.

I'm sure if he was selling rears, he would have posted them up.

You don't see anyone asking if the carpet on the floor is on sale.