my project s 13(pics)

[projectsilvia1]

got some pics of the project......enjoy
the clip
http://ka24.net/nissan/heathswap1/DSC00005.jpg
the car with ka
http://ka24.net/nissan/heathswap2/DSC00021.jpg
ka coming out
http://ka24.net/nissan/heathswap2/DSC00026.jpg
sr going in
http://ka24.net/nissan/heathswap3/DSC00004.jpg
sr in car
http://ka24.net/nissan/heathswap3/DSC00012.jpg
side shot of car
http://ka24.net/nissan/heathswap3/DSC00013.jpg
hks front mount, koyo radi,
http://ka24.net/nissan/heathswap4/DSC00010.jpg
and the front bumper back on the car
http://ka24.net/nissan/heathswap5/DSC00005.jpg

[Eternal_240Sx]

very nice...

[Justin-ATL]

very nice. Keep the pics and updates coming

[Nismo240SX]

NICE!!! i like it... how was install? i'm diggin your rims. what are you going to do with the old motor?

[projectsilvia1]

Thanks ppl for the replys i should be driving the car this weekend and i hope to take it to san fran this coming sunday for an autox day.
the old motor i gave to the guys that are doing the swap...it was the sohc motor anyway, and it had a bent valve
Mike

[-E-]

looks good :D

[elevator]

http://ka24.net/nissan/heathswap1/DSC00005.jpg
Looks like you're starting pretty much from scratch! Looks like a fun project!!

[projectsilvia1]

anyone want the left over clip??free
you pick it up
it is in palo alto

[projectsilvia1]

here is my set up
89 240sx fastback
red top sr
koyo aluminum radi
hks fmic
greddy 3'downpipe
greddy profec b
greddy turbo timer
greddy boost guage
apex n1 exhaust
maxima clutch
autopower 6pt roll cage
autopower 5pt harness
corbeau clubman seat
subframe spacers(bushings)
jic flt-a2 suspension
front17x8 rear17x9 mahdi caesar rims

[Silviaholic]

Originally posted by projectsilvia1
here is my set up
89 240sx fastback
red top sr
koyo aluminum radi
hks fmic
greddy 3'downpipe
greddy profec b
greddy turbo timer
greddy boost guage
apex n1 exhaust
maxima clutch
autopower 6pt roll cage
autopower 5pt harness
corbeau clubman seat
subframe spacers(bushings)
jic flt-a2 suspension
front17x8 rear17x9 mahdi caesar rims

sheweeeet christ....wanna trade? POS 90 fasback? has anice set of 6x9's in the back... :-D

[sykikchimp]

Nice setup!

How do you like the roll cage? I'm looking into getting one of this very soon, and would love to see some pics of it, and your comments on what you think about it.

What size tires are you running on those wheels. I'm going to be running the same widths in the near future. I have the FLT-a2's as well. How do you like this setup?

sorry for the questions... you have a lot of mods that really interest me. :)

btw - your wheels look sweet. Original too. Don't see many 240's running those kinds of wheels.

[CoasTek240]

wow that is a really nice setup u got there...
whats the deal witht he maxima clutch...?
can u tell me a little mor ebotu that
my clutch is soft as hell and need some adjustment

[b_dyche]

*drool*


Are you planning on painting the car the same as the engine bay is currently (original color?)

If so, that lighting looks like the SR and the engine bay are the same color...


that would look SWEET... and you could run around w/o the hood on (but not park it w/o you standing there!)


VERY NICE!

[rps13 SR]

i dun know i like the swap!! mine is almost done... but the rims are ghey.. i think.. get some advans

[projectsilvia1]

to syk...the roll cage is very nice, only thing that sux is getting in and out of it. right now the tires are 215 on the front and 235 on the back...i wish i had the 235's on front and some 255's in back but this is what were on the rims when i got them from a guy in san fran....i like my jic's, they are a little bit stiff on the street but hell i like it now.

to coast.....the clutch is from an older maxima,,,dont know much about it but that is what the guy installing it told me to get. supposedly jim wolfe uses this clutch set up as an upgrade package.

to b_....i am not sure if i am going to paint it cause it needs body work and i don't have the cash right now for that. need more go fast and be reliable goodies first..

to rps....i like my wheels i have never seen or heard of them until now and i like the 9inch back big ass lip
Mike

[sykikchimp]

did you have the cage welded in? did you have to remove the dash? was it the Roll Bar with the Additional front peice? I would assume since you side it's a bitch to get in and out of that it has the door bar, how high is compared to the seat? do you still hae your door liners (handle, pocket, etc..) on? what kind of seat are you using?

[nrcooled]

Originally posted by CoasTek240
wow that is a really nice setup u got there...
whats the deal witht he maxima clutch...?
can u tell me a little mor ebotu that
my clutch is soft as hell and need some adjustment

The pressure plate for the maxima and the SR are the same. Just get a aggresive disk and you are all set.

FYI the SPEC and ACT are maxima pressure plates w/ a more aggresive disk

[mistert]

Originally posted by rps13 SR
i dun know i like the swap!! mine is almost done... but the rims are ghey.. i think.. get some advans

those mahdi caesar rims are tight IMO, they're made by Rays (the same company that makes Volk, STI Prodrive and Nismo rims). that's also the first time i've ever seen a set of those on an s13 in the US

[rash]

Looks so good man..stay tuned..:cool: :cool:

[Jsquared]

NICE :D

i'm thinking about FLT-A2s also... do the 8"-wide and 9"-wide wheels fit OK with no rubbing? how much camber u running? and about the cage/harness... does it fit in the car nice enough to be a daily-driver and how much it run ya?

thanks in advance, you got some of the stuff i have on my wishlist :D

[projectsilvia1]

so far the wheels fit fine with the coil overs...haven't driven much on them yet as the car is still have the motor done,,,also the cage is ok for daily driving but if you want it to be better you should just get the 4pt so you can get in ok. not realy sure on the camber i haven't checked it but the back is bad cause i havn't gotten any other stuff yet from jic.

oh yea and i like advans and all but everyone has advans on their car and they think they are the ****....get something else be original or get the gab ones i like those too
Mike