PDA

View Full Version : Down pipe for stock ka?


s13pignose
12-18-2008, 04:56 PM
interested in running a 3" downpipe mated to the stock manifold. Seen this on ebay...

http://s1.promotionsupplies.com/ebay/etdmotors/images/down_pipe/AU-Dp-14+TP-S13-S14.jpg

claiming: Stainless Steel 3" Downpipe + Test Pipe

for NISSAN 240SX 89-98 S13 S14 S15


works with stock KA24 Engine and JDM Swap SR20, RB

Is this possible..thats alot of applications

wht240sx
12-18-2008, 05:34 PM
it will only work on an s14 ka exhaust manifold 95+. s13 ka exhaust manifolds have a different bolt pattern. hope that helps:wiggle:

projectRDM
12-18-2008, 06:26 PM
It will bolt to the S14 KA manifold, but the flange at the rear isn't correct and won't line up with the rest of the exhaust. You need to either cut and rotate it or buy a converter or exhaust with a floating flange.

s13pignose
12-18-2008, 06:32 PM
projectRDM
Dangit i remember someone saying that,, I thought it was you. Hmmm thats the issue then...that flange. Let me see is it because the flange holes are suppose to match the rest of the exhaust like this / instead of horizontal like this _

???

Thanks for replying