Thursday
12-03-2008, 10:27 PM
http://i159.photobucket.com/albums/t156/turbodcivic/ceg8551.jpg
This is the CEN Racing MG16 4WD RTR Monster Truck. CEN Racing listened to our customer requests for a smaller monster truck that could be driven in areas where the GST 7.7 couldn't. With the arrival of the MG16 you can have the same MONSTER nitro fun that the GST 7.7 and Nemesis dish out, but in a package about a quarter of the size. Don't worry about where you can drive the MG16, just find a spot and bash! Though the MG16 is completely Ready To Rock out of the box, you can rest comfortably knowing that if you decide to use your own radio gear the MG16 uses standard size RC components. No more having to deal with the tiny mini servos with their weak gears that strip out from the tough beating that monster trucks dish out. You won't have to find to shop around for the tiniest receiver to get your truck running.
The MG16 with its .stump pulling 2.5cc pull start engine, provides blistering acceleration. With the MG16's awesome power to weight ratio, you'll still be able to smoke the larger 1/10th scale trucks in a drag race! Don't be afraid that the power of the MG16 will just lead to you spinning your wheels, with the full time 4WD you won't find yourself short of grip to get the power to the ground.
The MG16 is full time shaft driven 4WD with a unique front bevel gear differential coupled with a traditional 3 gear transmission in the rear. The unique molded chassis, and center cutout allows for the drive shaft to sit at the same level as the chassis itself, this allows for the MG16 to have a lower overall CG for enhanced handling prowess. Maintenance on the MG16 is a breeze. With the simple chassis layout getting to the transmission and differentials are a piece of cake. Fixed camber links and toe links cut down on the adjustments letting you focus on the more important side of RC, fun!
The center drive shaft is fully protected by the sides of the MG16 chassis. With the full time shaft driven 4WD handling the horsepower that the 2.5cc recoil start engine dishes out is no problem! And if you're skeptical that the 4WD drivetrain isn't enough, CEN SPORT has equipped the MG16 with a slipper clutch to provide enhanced traction and power transfer.
Features:
Completely Ready to Run
Skyion DSX Radio System
Lighting fast Acceleration
Full time shaft driven 4WD
Ball bearing supported
Reinforced composite chassis components
Powerful 2.5 Engine
High flow manifold with rear exit exhaust
75cc fuel tank with filter
Built in servo saver
Big Bore Oil Filled Shocks
P & D Body
Sealed receiver and battery Compartment
Single Speed Transmission with Slipper Clutch
Adjustable Suspension geometry
Adjustable toe-in and camber
High Impact front bumper
Stylish 2.2" offroad wheels
High grip v-treaded off road tires
Compatible with 1/10 parts, Unlimited upgrade potential!!
tuned by mel (zar)
pretty much new, comes with aftermarket controller and a qt of gas.
only needs a 10 dollar suspension part to get back on the road.
vid in action
YouTube - Cen MG16 Nitro Monster Truck (http://www.youtube.com/watch?v=GaX3V-Scu8c)
asking 150 obo
This is the CEN Racing MG16 4WD RTR Monster Truck. CEN Racing listened to our customer requests for a smaller monster truck that could be driven in areas where the GST 7.7 couldn't. With the arrival of the MG16 you can have the same MONSTER nitro fun that the GST 7.7 and Nemesis dish out, but in a package about a quarter of the size. Don't worry about where you can drive the MG16, just find a spot and bash! Though the MG16 is completely Ready To Rock out of the box, you can rest comfortably knowing that if you decide to use your own radio gear the MG16 uses standard size RC components. No more having to deal with the tiny mini servos with their weak gears that strip out from the tough beating that monster trucks dish out. You won't have to find to shop around for the tiniest receiver to get your truck running.
The MG16 with its .stump pulling 2.5cc pull start engine, provides blistering acceleration. With the MG16's awesome power to weight ratio, you'll still be able to smoke the larger 1/10th scale trucks in a drag race! Don't be afraid that the power of the MG16 will just lead to you spinning your wheels, with the full time 4WD you won't find yourself short of grip to get the power to the ground.
The MG16 is full time shaft driven 4WD with a unique front bevel gear differential coupled with a traditional 3 gear transmission in the rear. The unique molded chassis, and center cutout allows for the drive shaft to sit at the same level as the chassis itself, this allows for the MG16 to have a lower overall CG for enhanced handling prowess. Maintenance on the MG16 is a breeze. With the simple chassis layout getting to the transmission and differentials are a piece of cake. Fixed camber links and toe links cut down on the adjustments letting you focus on the more important side of RC, fun!
The center drive shaft is fully protected by the sides of the MG16 chassis. With the full time shaft driven 4WD handling the horsepower that the 2.5cc recoil start engine dishes out is no problem! And if you're skeptical that the 4WD drivetrain isn't enough, CEN SPORT has equipped the MG16 with a slipper clutch to provide enhanced traction and power transfer.
Features:
Completely Ready to Run
Skyion DSX Radio System
Lighting fast Acceleration
Full time shaft driven 4WD
Ball bearing supported
Reinforced composite chassis components
Powerful 2.5 Engine
High flow manifold with rear exit exhaust
75cc fuel tank with filter
Built in servo saver
Big Bore Oil Filled Shocks
P & D Body
Sealed receiver and battery Compartment
Single Speed Transmission with Slipper Clutch
Adjustable Suspension geometry
Adjustable toe-in and camber
High Impact front bumper
Stylish 2.2" offroad wheels
High grip v-treaded off road tires
Compatible with 1/10 parts, Unlimited upgrade potential!!
tuned by mel (zar)
pretty much new, comes with aftermarket controller and a qt of gas.
only needs a 10 dollar suspension part to get back on the road.
vid in action
YouTube - Cen MG16 Nitro Monster Truck (http://www.youtube.com/watch?v=GaX3V-Scu8c)
asking 150 obo