PDA

View Full Version : Turn signals dont work


mkslide
12-01-2008, 10:32 PM
i checked fuses and hazards they still dont work

Also cluster didnt light up so i changed that white box by the kik panel

WHERE IS THE RELAY or "blicker box' for the turn signals?

mkslide
12-02-2008, 12:07 AM
also when i put the harzards on or the blinkers i dont here that clicking noise where is the blinker box? what where is the blinker relay?

g6civcx
12-02-2008, 05:41 AM
Year/make/model

projectRDM
12-02-2008, 09:35 AM
Flasher relay is located on a bracket right near the hood release on S14s. On S13s it's slightly more complicated, it's hanging off the firewall directly above the steering column.

mkslide
12-02-2008, 09:44 PM
90 240sx s13 coupe ALSO i see a three hole connector connected to nothing its on the harness that the brake connector goes to the brake pedal....

projectRDM
12-03-2008, 08:21 AM
Wires are black, green, and yellow/green IIRC. 3pin black connector, leads are set up like a triangle in the plug. That would cause your signals not to work. Plug it back in.

mkslide
12-03-2008, 04:49 PM
I dont see this connector going any where ive looked and looked but cant find where to plug it into where does it go?

SUPERSTAR
12-03-2008, 04:53 PM
It;s under you dash close to firewall. Waaaaaaay in there, I just changed mine and it was a bish finding it, but it's there.

mkslide
12-03-2008, 06:08 PM
YESSS FIXED thanks guys SEEE there wasnt even the box there so thats why but i got one thanks everyone

driftpolice
11-04-2009, 04:18 PM
could the wires be yellow, black, and green/red?