View Full Version : SR turbo oil feed banjo bolt
pete240
11-25-2008, 08:44 AM
I'm looking for a SR banjo bolt for the turbo oil feed line. I don't know where to find one and I've read that the stock one has a restrictor built into it so you can't just grab a random one off the shelf. I do have the ability to use an AN fitting type but that still leaves me with the restrictor problem. If someone can get me a part number I don't mind ordering it if I know its the right part.
757coupe
11-25-2008, 09:18 AM
frsports has some good shit.........start looking there
japslapsilvia
11-25-2008, 09:44 AM
just do the "an" fitting and get a restrictor 240sxmotoring has the restrictor to screw into the turbo.
and pegasus has the fitting for the block
pete240
11-25-2008, 10:16 AM
Do you have the thread pitch specs for the block? Somewhere I think I saw something like 12mmX1.25 but I want to be sure.
japslapsilvia
11-25-2008, 10:21 AM
yea its
size is M12 1.25 to -3AN
and here is the only place i have found them Pegasus - Male 12 x 1.25mm Metric Convex Seat to 3AN Male, Steel (http://www.pegasusautoracing.com/productdetails.asp?RecID=5936)
pete240
11-25-2008, 11:44 AM
I've called a few places in town and had no luck finding the AN adapter in stock so I may order it through pegasis but damn that restrictor is expensive. I also sourced the correct part number for the banjo bolt since courtesy nissan only had their part number. It's 16432-P9000 (http://nissan4u.com/parts/info/16432P9000/) and the source is Turbo charger — Illustration #2, Nissan 300ZX 1994 (http://nissan4u.com/parts/300zx/el_z32/1994_3/type_1/engine_mechanical/turbo_charger/illustration_2/)
http://www.courtesyparts.com/15192aa-bolt-eye-300zx-z32-1990-1996-p-182424.html
porkybmx
11-25-2008, 12:57 PM
Baker Precision has what you need too. Baker Precision - Buy Racecar parts and supplies online - including Earl's, Speedflow and Aeroquip Hose and Fittings, Aurora, NHBB and FK Rod Ends, Neo Synthetic Oil, Setrab Oil Coolers, Fire Systems, Fuel Cel (http://www.bakerprecision.com) Just call them and they'll take care of you.
pete240
11-25-2008, 07:10 PM
thanks for you help guys. I did end up finding the adapter in town through a local race shop and its the same one as the one japslap linked on the pegasus website :D it fit my block and steel braided line perfect :D
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.