PDA

View Full Version : CA CA18DET full swap with FMIC

revd34
11-16-2008, 01:36 PM
ok so my last thread got locked because of to much TRASH talking. S14DB told me that anyone starts shit talking on this thread you will be banned. thank you i want to sell this and not have to deal with back and forth talk about the price. if you have a problem with my price PM so i can ignore you. YOU WILL GET BANNED FOR TRASH TALKING ON THIS THREAD. THEY ARE WATCHING!

i have a CA18DET that is ready to drop in. i bought this off drift freaq a while back. you can drop this in right away. it runs great. we test drove the car (http://zilvia.net/f/#) before we pulled it out and it pulls hard. i can have someone vouch for me. it is complete motor set and pre wired to drop in an S13. I AM NOT PARTING OUT

THE PRICE (some of these prices are over estimated and some are underestimated)

motor+tranny+ecu= $1100
greddy downpipe=$140
greddy BOV=$120
greddy air filter=$60
FMIC (i forgot what brand)=$200
radiator with slim electric fan=$50
Spec clutch stage 2 (brand new 0 miles)= $300
nismo motor mounts (brand new 0 miles)=$140
spl transmission mount=$50
ka24de gauge cluster=$20
wire harness job=$100
DOHC P/S lines and resovoir
total=$2280

install=$700 (based on rbperformance.net)
total+install=$2980

i am asking for:
$2000 picked up
i can have my friend do the swap for $500
so $2500 installed
http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600.http://i96.photobucket.com/albums/l174/loser34_01/CIMG2200.jpg
http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600.http://i96.photobucket.com/albums/l174/loser34_01/CIMG2201.jpghttp://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600.http://i96.photobucket.com/albums/l174/loser34_01/CIMG2202.jpg
http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600.http://i96.photobucket.com/albums/l174/loser34_01/CIMG2205.jpg
revd34
11-17-2008, 12:18 PM
bump it to the top
Altered_Image
11-17-2008, 12:46 PM
If I was in Cali, I would be there tomorrow to get this dropped in my S13. Would you be willing to ship to Ohio?
racepar1
11-17-2008, 02:10 PM
Oh, we forgot to mention that it includes the P/S lines and resovoir too. The CA's require the DOHC set-up.
Wookie384
11-17-2008, 02:17 PM
Back to the top.
Shmex
11-17-2008, 02:30 PM
Hey aron, youstill got this motor??? This is the one that was in your shop yah?
revd34
11-17-2008, 10:38 PM
Hey aron, youstill got this motor??? This is the one that was in your shop yah?

yes this is the one
revd34
11-17-2008, 10:39 PM
If I was in Cali, I would be there tomorrow to get this dropped in my S13. Would you be willing to ship to Ohio?

i never shipped a motor set before. i would need to do some searching. i will let you know
Altered_Image
11-18-2008, 01:39 PM
i never shipped a motor set before. i would need to do some searching. i will let you know

Thanks, that would be great. There is a guy that is in New York that has a similar set up and he is quoting me $445 for shipping to a shop and is including putting it on a pallet and everything. Not sure who you would use, but you could "slow boat" it and save some money. I just think the most important part of shipping would be to package it on the pallet securely and without breaking anything on the motorset.

Let me know what you find out. I am still interested and in no huge rush since it is now snowing in Ohio. I will just need to get a swap done for my car before May when Cleveland thaws and I can get back out to the track (my car isn't streetable and is for track only).
racepar1
11-18-2008, 02:51 PM
If Daniel decided to ship this motor it will come out of my shop. I am not new to shipping motors, so you don't have to worry about secure packaging.
revd34
11-18-2008, 04:34 PM
Thanks, that would be great. There is a guy that is in New York that has a similar set up and he is quoting me $445 for shipping to a shop and is including putting it on a pallet and everything. Not sure who you would use, but you could "slow boat" it and save some money. I just think the most important part of shipping would be to package it on the pallet securely and without breaking anything on the motorset.

Let me know what you find out. I am still interested and in no huge rush since it is now snowing in Ohio. I will just need to get a swap done for my car before May when Cleveland thaws and I can get back out to the track (my car isn't streetable and is for track only).

i P.M. you i can get you a definite quote if you are serious about buying it. it might be $400-$500. it will be shipped on a pallet. and like my friend send he will make sure it is shipped right. P.M me back thank you
revd34
11-19-2008, 03:46 PM
bump just for people who are interested i can ship it to you no problem. it will roughly be about $500
khoadogg
11-19-2008, 04:57 PM
bump for a sweet ass deal!
Thursday
11-19-2008, 06:45 PM
damnnnnn


hella good deal. i paid 1500 for my stock ca18 with nothing...


willing to trade plus cash for a cbr 600?
revd34
11-20-2008, 02:25 AM
damnnnnn


hella good deal. i paid 1500 for my stock ca18 with nothing...


willing to trade plus cash for a cbr 600?

thank you but i'm looking for cash only. no trades
revd34
11-21-2008, 10:47 AM
bump for the weekend
ultramagnus
12-05-2008, 11:11 PM
if this thing is still around after jan. i'll be more than likely ur buyer, just waiting for my accident check to roll in and my mounting kit for aus to roll in.:hyper:
revd34
12-06-2008, 02:41 AM
if this thing is still around after jan. i'll be more than likely ur buyer, just waiting for my accident check to roll in and my mounting kit for aus to roll in.:hyper:

i can't wait to. maybe i can get a PM from you in jan:hyper: