I just put 350z wheels on.

[SnakeKack]

I just got a set of the 17 inch 350z wheels and I put them on today and when you look at the back of my car the driver side rear wheel sits flush with the rear fender, but on the passenger side it sticks out alot like almost half an inch. The car was converted to 5 lug before I bought it and I was curious if all the 5 lug hubs that bolt onto the s13s are the same width because this car was never in an accident so I figure it has to do with the suspension or something. Anyone have any ideas?

Oh and the car from the factory is a Hicas I dunno if that matters.

[BoostedCoupe]

could be camaber one could have more negtive camaber than the other one or one could have more postive camaber.

[DreamN]

pix please.

[Stevespeed]

Pictures would be helpful, if you could, please?

[SexPanda]

easy to see if its the camber. stand parallel with the tire, and see if its angled out. 1 inch between the two should give you a quite noticeable angle.

[SnakeKack]

I try but they might not come out at night time. be up in a minute

[redline racer510]

probably have the wheels for the front in the back and vice versa
front and rear wheels have different offset and different tire size

[clark]

think of the vag you saw when you were younger. it was nice and tight.

notice now that you're a bit older, vagina's tend to be beat up and a little messy and loose. some even smell/taste bad.

that is what happened to your subframe.

your subframe is out of whack probably, or even perhaps your chassis is twisted.

but yeah, subframe is funky cuz your bushings are chewed up, like a used up old vag.

but redline racer does make a good point.

[redline racer510]

look on the inside of the wheel you should see 7.5 front and 8.0 in the rear and install accordingly. If that doesnt solve your prblem you might have one of your rear arms or suspension components bent. Might be a simple fix or maybe not.

[SnakeKack]

Here's the pics. I dunno if they are good enough it looks worse in person.

Driver's side
http://i95.photobucket.com/albums/l142/SnakeKack/ofckwheels004.jpg

Passenger side
http://i95.photobucket.com/albums/l142/SnakeKack/ofckwheels003.jpg

Passenger
http://i95.photobucket.com/albums/l142/SnakeKack/ofckwheels002.jpg

http://i95.photobucket.com/albums/l142/SnakeKack/ofckwheels001.jpg

[SnakeKack]

I'll try to take better ones today.

[Def]

Look at the wheel widths like everybody on here is telling you to do.

[98s14inaz]

Look at the wheel widths like everybody on here is telling you to do.

I concur, z wheels are staggered. Check to make sure you have them in the right place.

[s13 @ fullboost]

^^^ lol if that's the problem that Is funny =]

[redline racer510]

Take all four wheels off and check the inside of the wheels for the words FRONT 7.5 or REAR 8.0.

[SnakeKack]

I guess i could do that but the wheels have the original tires on them. The guy got new rims and tires at like 20,000 miles.

[redline racer510]

ok please clarify.

[derek_s13]

I guess i could do that but the wheels have the original tires on them. The guy got new rims and tires at like 20,000 miles.

don't take the tires off...... ? take the wheels off the car, and just read them. it'll say
on the inside of the barrell.

[s13dan]

Its just how 240s are, live with it or get a spacer.Right track sticks out its gay i know.

its seems some 240s are worse than others..

[lazysk8er2]

looks like the toe is in more on one side... i dunno maybe its the lighting

[1slowS13]

my car does this. if you have the staggered wheels setup right, then its your car LOL

my wheels stick out farther on my driver side a good inch past my q/p, and im tucking my tire in on the left, and thats with less camber on the passenger side. weird.

[TehMaverick]

take left turns only. :bigok: