Quick Question about SARD FPR Adapter

[rocksteady_racer]

Does anyone know what size the fitting is on the SARD FPR adapter is from FRSport? I got it and I can't figure it out. I'm hooking it up to an aeromotive fpr with -6an Lines so I just need a reducer into the rail. SARD FPR Link here (http://www.frsport.com/SARD-Fuel-Pressure-Regulator-Adapter-FPR_p_1361.html) My guess is it's a -4AN fitting but I'm not sure and just making sure before I order the reducer from summit. I asked FR Sport but they said it was a -6AN fitting which it clearly is not.

Thanks in advance.

[Sileighty_85]

Order it from Enjuku it comes with a -6

SARD Fuel Rail Adapter - Enjuku Racing Parts, LLC (http://enjukuracing.com/sard-fuel-rail-adapter-p-8044.html?cPath=24_81)

[Fries]

Does anyone know what size the fitting is on the SARD FPR adapter is from FRSport? I got it...
Thanks in advance.

Order it from Enjuku it comes with a -6

SARD Fuel Rail Adapter - Enjuku Racing Parts, LLC (http://enjukuracing.com/sard-fuel-rail-adapter-p-8044.html?cPath=24_81)
He already bought one from FRSport.

[Mirage]

that piece you linked too is threaded for 1/8" NPT, if you buy the sard regulator with 6 -AN it comes with 2 -6 to 1/8" NPT adapters, but since you have an aeromotive you just need to buy the adapter by itself, -6 to 1/8" NPT male to male.

[rocksteady_racer]

Enuku was a little helpful. It's the same thing as mine except for the fitting I need. It's way over priced with the fitting by the way - you can get the reducer for like 4$ and the fpr adapter is only 25 at frsport. Anyone know what size fitting that is?

[rocksteady_racer]

O so the SARD FPR adapter has a 1/8 NPT fitting?

[rocksteady_racer]

This is what I need to hook up the -6AN hose to the rail then right: Earl's Performance 981662ER (http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR-981662ERL&N=700+400041+300499+4294849624+4294906726+42949066 72+215+4294906747+115&autoview=sku)? It's a -6AN to 1/8 NPT fitting so that's it right? Or is it not a 1/8 NPT? Anyone know for sure?

[rocksteady_racer]

Final Answer it is a 1/8 NPT I just checked with my fuel pressure gauge I just found I forgot I had. So in future reference when somebody has this question: Connecting Aeromotive FPR to SARD Fuel Pressure Regulator Adapter, you need a 6 AN to 1/8 NPT fitting like the above from summit. Unless you just use a 5/16 in barb fitting/1/8 NPT and a 5/16 Barb fitting/-6 AN to utilize a rubber hose instead of the stainless steel I went to. I'll do a write up of my install and where i got my fittings whenever I install the FPR. And the other options.