PDA

View Full Version : NO start!!!!


626Silvia
11-11-2008, 03:36 PM
Heres the deal. I just upgraded my cams and head gasket. Followed the FSM to the letter. Bled the lifters, matched up the cams/CAS and the crank to TDC. Cranks but wont turn over? Need help...thanks!!:aw:
MODs:
Stock turbo
Stock exhaust manifold
3'' down pipe, exhaust
FMIC
1.5 Head gasket
ARP head studs
BC 264 cam
BC springs/retainers
New NGK spark plugs
Also can some one supply me with the list of ECU codes? thanks again!!!

Sileighty_85
11-11-2008, 04:05 PM
double check all connections/fuses and grounds

Codes are in here
http://zilvia.net/f/engine-tech/62607-sr20det-faq.html

626Silvia
11-11-2008, 09:18 PM
double check all connections/fuses and grounds

Codes are in here
http://zilvia.net/f/engine-tech/62607-sr20det-faq.html


ok double checked all the grounds and fuses and such. Also checked ECU code and got a 11 CAS prob. Now I double checked the timing and everything is good as for as the markings matching up.
Now here is the real problem, I just read a thread from a NissanSilvia.com about the BC 264 cam and that they are NOT plug and play. I should have known with the timing card that came with the cam. Anyway the thread said that I need a Timing advance wheel and some other tools to advance the timing via the cam sproket! Well I dont have adjustable cam sprokets so...ya?
Has anyone here installed BC cam (264 with 12.4 lift) and had this problem? any help would be good! Also if anyone could expalin how this timing wheel thing works?
thanks again S.

Sileighty_85
11-11-2008, 09:25 PM
if your ECU is Throwing a CAS code then it wont start, there is somthing wrong with the Cam Angle Sensor.

The CAS controls your timing and fuel so if its busted then your engine wont start.

but even with the Cam's your engine would still start it would just run crappy until you dialed and tuned everything

626Silvia
11-11-2008, 10:35 PM
if your ECU is Throwing a CAS code then it wont start, there is somthing wrong with the Cam Angle Sensor.

The CAS controls your timing and fuel so if its busted then your engine wont start.

but even with the Cam's your engine would still start it would just run crappy until you dialed and tuned everything

Ya...I thought that as well and replaced the CAS with another that I know that works? Still no start? Cranks, but no turn over.

Addicted2Kouki
11-12-2008, 01:10 AM
check mechanical timing.