How do you remove a stud off a turbo elbow?

[SilviaSR20DET]

Hey guys, im trying to figure out the best way to remove a broken stud on my sr turbo elbow. It would be great if someone with experience make a list on materials/tools needed and procedure as this might help others as well in the future. thanks!

[phi_ho1]

weld another one right on it and you can remove it easy. trust me on this

[SilviaSR20DET]

do you just twist it counter clockwise or tap it out.

[phi_ho1]

counter clock then it will go out

[sliEighty]

if its broken below the surface go get and easy out and some zep silicone lube that sucker will come out easy as a mcdonalds terd

[n240sxfnatic]

im retarded and cant read nvmd.

[phi_ho1]

put 2 nuts on it. Take a wrench on the bottom one and twist counter clockwise on the bottom not so the top one holds it and the whole stud will back out.

his stud is broken

[murda-c]

depending on how far down it is broken, you may be able to slot it win a dremel and then back it out with a flat head. that's what i did.

[japslapsilvia]

1. drill a hole in the stud
2. get an extractor
3. remove stud
done and done
also a little heat from a torch help out.

[bo2o]

get a new elbow. done!

[SilviaSR20DET]

thanks for the help guys, id rather give it a try then fork out extra money to buy a new one as this turbo elbow has the egr welded shut which is what i need.