PDA

View Full Version : any idea how to get this on?


repda916
11-10-2008, 07:24 PM
driver side left of the RUCA, needs to be pushed in there is about an inch gap till the holes line up.
Everything else is bolted in. im thinking my subframe is bent.

also i need to get to school tomorrow so would it be a bad idea or can it hurt anything if i drive it about a mile and back?

http://img508.imageshack.us/img508/2972/dsc00666ka5.jpg (http://img508.imageshack.us/my.php?image=dsc00666ka5.jpg)
http://img508.imageshack.us/img508/dsc00666ka5.jpg/1/w320.png (http://g.imageshack.us/img508/dsc00666ka5.jpg/1/)

sbc
11-10-2008, 07:32 PM
Floor jack to lift the hub?

repda916
11-10-2008, 07:48 PM
Floor jack to lift the hub?
Dosent work

ericcastro
11-10-2008, 08:05 PM
try bolting it up first, then the other stuff??

is there a reason its undone? did you reasontly have an accident?

1 mile, just walk it dude.

whatda
11-10-2008, 08:13 PM
try to get it as close as possible to the hole and instead of using the blots put a screw driver and push it forward and on the opposite side begin to put the blot and then just hammer it in.
unbolt the side of the lca and blot the side u took a pic of and do this^^^^

Dousan_PG
11-10-2008, 08:24 PM
yeah its really important part hahahah
dont drive w/ it unbolted
unbolt the toe link and then put this one in, is easier
haha
drive ...NO

gotta240
11-10-2008, 08:27 PM
Take your driveshaft out of the car. If you can drive without the driveshaft, then fuck it, you can drive without this part too.



Just walk. That shit is important. As already stated, re-bolt arms in different order.

SoguRacing
11-10-2008, 08:29 PM
looks like you need to compress the coil to allow the arm to move.

azndoc
11-10-2008, 09:57 PM
Shit.....

Back in Dave's (Drift Freaq)'s days he used to have to walk 5 miles in the snow because there was no school bus.


Seriously 1 fucking mile.

Kids these days.

Instant gratification. No wonder kids are fat.

End rant.

Do what the other people have said already.

Because I'm too lazy to say so too.

repda916
11-10-2008, 10:13 PM
lol had to replace my axle i think my subframe is bent so im ordering the spl bushings then putting in the new sub frame

Adikt
11-10-2008, 10:14 PM
take out your shock/coilover... then jack up the knuckle

Ninjabread
11-10-2008, 10:44 PM
Yep, bingo, just unbolt your shock.

soon2bs13
11-10-2008, 10:44 PM
lol had to replace my axle i think my subframe is bent so im ordering the spl bushings then putting in the new sub frame


Do you know for a fact that your subframe is bent? It would suck that you spent money on something that you think you need to fix.

Did you get into a wreck?

ericcastro
11-10-2008, 10:54 PM
Shit.....

Seriously 1 fucking mile.

Kids these days.

Instant gratification.


Yup



this message is too short, blah blah blah

Maiku240sxS14
11-10-2008, 11:14 PM
so would it be a bad idea or can it hurt anything if i drive it about a mile and back?

http://img508.imageshack.us/img508/2972/dsc00666ka5.jpg (http://img508.imageshack.us/my.php?image=dsc00666ka5.jpg)
http://img508.imageshack.us/img508/dsc00666ka5.jpg/1/w320.png (http://g.imageshack.us/img508/dsc00666ka5.jpg/1/)

:wtf::newbie:

repda916
11-11-2008, 01:17 AM
i hit a carb bent the lower control arm. replaced it. wasnt even going fast. many people told me it was unlikley i bent the subframe (pretty hard to do) i dont know what to do. is it usually hard to reinstall all back together like this? also i do have the shock disconnected. and i did try to jack it up from the nuckle part . i even put the tire on and slowley lowerd the car to see if maybe it would fall in place. didnt do anything. spent a whole week doing this. tried 2 axles and still nothing i dont know what to do.

Walperstyle
11-11-2008, 01:36 AM
age 17, 'hit a curb'... hummm

dont drift your daily driver :p

ericcastro
11-11-2008, 01:39 AM
get a tape measure and start checking the sub frame.

also, so what we all said. attach that part first, then put the rest together.
should take no time at all to try it.

hopefully you learned the track is alot cheaper and more fun in the long run :)
come out to the 626DRIFT events here in SoCal

repda916
11-11-2008, 02:13 AM
age 17, 'hit a curb'... hummm

dont drift your daily driver :pi was actually driving to school and making a left hand turn on a street where you kinda have to judge when the best time to go is (there is a blind corner) started going, almost got t boned gave it gas slide out (welded) and over steered, was in the middle of a 180 when a curb jumped in front of me. :hsdance:

Hashiriya415
11-11-2008, 02:13 AM
ever used a pry bar?

repda916
11-11-2008, 02:24 AM
ever used a pry bar?how is that going to work? there is no where to pry it. we even put the big 36 mm nut on the axle and lifted it up. didnt work.

!Zar!
11-11-2008, 02:27 AM
i was actually driving to school and making a left hand turn on a street where you kinda have to judge when the best time to go is (there is a blind corner) started going, almost got t boned gave it gas slide out (welded) and over steered, was in the middle of a 180 when a curb jumped in front of me. :hsdance:

/excuse.

/driving skill

/license

repda916
11-11-2008, 02:40 AM
/excuse.

/driving skill

/license
Yea yea, learn from mistakes.

Addicted2Kouki
11-11-2008, 03:50 AM
fail.



unbolt shock.
bolt up inner side first.
jack up the rear hub/upright.

Kalashnikov
11-11-2008, 04:41 AM
If all fails.

B.F.H.

or a V.B.F.H.

DALAZ_68
11-11-2008, 07:29 AM
try bolting it up first, then the other stuff??

is there a reason its undone? did you reasontly have an accident?

1 mile, just walk it dude.
my thoughts exactly, save gas, protect ur car...its a mile

los_inc
11-11-2008, 08:16 AM
he must be monster truckin if you can' get that shit on with shock/coil installed
<3
-los

HS13KLS
11-11-2008, 08:18 AM
i want the rep system!!!


NOW

sell your car.

and ride a vespa.

thats what you need.

you need to just unbolt stuff. and use that jack.

dont tighten everything down untill you get all the bolts through.

redline racer510
11-11-2008, 09:45 AM
curb + car = Bad Day

redline racer510
11-11-2008, 09:46 AM
just try intalling that first then jack up your lca

Hashiriya415
11-11-2008, 11:56 AM
how is that going to work? there is no where to pry it. we even put the big 36 mm nut on the axle and lifted it up. didnt work.

How about between the knuckle and the traction arm? you have like a 5mm clearance between.

repda916
11-11-2008, 03:40 PM
thanks for the help guys. got the basterd on.
just needed to take a break and think it out.

racepar1
11-11-2008, 03:43 PM
Shit.....

Back in Dave's (Drift Freaq)'s days he used to have to walk 5 miles in the snow because there was no school bus.


Seriously 1 fucking mile.

Kids these days.

Instant gratification. No wonder kids are fat.

End rant.

Do what the other people have said already.

Because I'm too lazy to say so too.


Bwwwwwahahahahahahahahaha! LOfuckingL! I gotta PM Dave a link to this one!