Installing a rear sway bar for a S14

[shortcake]

Now i'm having an issue, i've tried searching but ic an't seem to find it....please direct me to the right direction.

i'm trying to install a Rear Sway Bar, on my 95 S14, and it didn't come with one stock. so the mountin points for the brackets just don't work, now i've bought new brackets, but i can't put them to use, since i can't mount it to the subframe.

if anyone has done this, please let me know i'm tired of thinking,
Thanks

[IngS14]

questions,s14 stock sway bar?s14 stock sway bar brackets?

[revat619]

Do you have the exhaust completely on still?

Is the sway bar stock?

Are the brackets/end links stock?

if you have the s14 mounting brackets and an s14 sway bar, it will bolt right up no problem. The mounting points are the same as an s14 that came with a sway bar from the factory.

I did this on my old car.

[Ali 556]

Do you have the exhaust completely on still?

Is the sway bar stock?

Are the brackets/end links ?

if you have the s14 mounting brackets and an s14 sway bar, it will bolt right up no problem. The mounting points are the same as an s14 that came with a sway bar from the factory.

I did this on my old car.

+1 Even If You Think that the Sway bar is For S13...S13 SB Are Direct bolt on on S14....

Ali

[SochBAT]

Yea, removing the exhaust is a big one to finding any mounting points. The stock ones SHOULD be on there unless the owner before you took it off. Should also already have the bolt holes to screw it into.

4 bolts, 2 on each side, use lube to keep it clean.

[shortcake]

lol I have new brackets and i have new end links as well.

my problem is, the car didn't' come with a stock sway bar, so are the brackets for the car 2 bolts each side? or 1 bolt and 1 nut on each side like the front? that's my main issue. i know where the points for the brackets are, but i wans't sure if all i needed was two bolts.

hopefully that's it, thanks guys!

[revat619]

the D brackets have two bolts/nuts on each side.

[projectRDM]

lol I have new brackets and i have new end links as well.

my problem is, the car didn't' come with a stock sway bar, so are the brackets for the car 2 bolts each side? or 1 bolt and 1 nut on each side like the front? that's my main issue. i know where the points for the brackets are, but i wans't sure if all i needed was two bolts.

hopefully that's it, thanks guys!

Lay under the car, look straight up at the forward legs of the subframe. There's two tapped holes a few millimeters apart on each side. Mount the bar there. It's not rocket science, with it mounted to the Aarms there's only one place it will line up, you can't do it wrong.

[shortcake]

^ i wasn't sure if it was threaded.
because in the front, there's 1 bolt and 1 nut on the left and one bolt and one nut on the right, so i thought it may have been similar on the rear as well,

i just wanted to buy the right stuff, because nissan won't refund it if it's wrong.

but it seems like it's quite unanimous, thank you guys.