hayaimoto
10-15-2008, 04:47 PM
Alright guys,
It's time for me to put her up for sale, just have to many cars and no time or money right now to build all of them. So for some of you who know me, my stuff is always legit and price great. The only thing I suggest is for the new owner to tune the car, it makes about 260RWHP at the moment but that is only at 10psi, this motor is good up to 15psi+ with proper tuning!
Note:The car will come with new front bumper and 30MM front fenders, since I cracked it on my driveway and have never repaired it. The Power Steering system will need a full bleeding, since the power steering kicks in at High RPM. The car is currently under Non-Opp registration (since I dont drive it) and must be towed or trailered away (unless you want to drive it the stickers just expired a few days ago in October).
Chassis: 1990 240SX SE *Non Sunroof, Power Windows CLEAN TITLE!
Engine:
-Blacktop SR20DET *Never seen past 10PSI
-Silvia S15 Spec R Dual Ball Bearing Turbo
-HKS Adjustable internal wastegate
-800CC Denso Side feed injectors
-Circuit Sports water lines
-Aworks Full Stainless Exhaust Manifold
-HPI (Tomei) 3 Inch Turbo Elbow
-Aworks 3 inch down pipe
-Aworks 3 inch cat elminator
-Aworks 3 inch exhaust system
-QTP 3 inch Cut out
-Aworks Front Mount intercooler (Spec S)
-Custom intercooler piping
-Greddy style intake manifold
-Aworks Oil Catch Tank
-HKS Intake filter
-Aworks 3 inch aluminum Intake
-Manual boost controller
-Apexi Power FC (D-Jetro: No MAF)
*Aworks products are made by the same company whom make HPI products in Japan!
Drivetrain:
-RPS 6 puck competition clutch
-RPS competition cover
-KAAZ 2 way Solid type LSD
Exterior:
-Uras Type 4 Aerokit (aggressive stance)
-180SX Kouki Type-X Tailights
-Custom rolled quarter panel (rear)
-Custom metallic purple paint
* NOTE: Car will be coming with brand new front bumper and 30mm wide fenders in front (cracked bumper on driveway)
Interior:
-FET Quick release
-Nardi Steering wheel
-Momo hub
-Aworks Full Race Bucket seat (driver)
-Wedge engineering brackets
Suspension:
-Apexi N1EXV full adjustable dampers
-Circuit sports front 5 lug hubs
-Ichiba rear 5 lug hubs
-Crossdrilled / slotted front rotors
-PBR Semi-racing pads
Wheels:
Work Emotion XD9 (Silver)
Front 18x9 +20 Rear: 18x10 +18
Federal tires: 225-40-18 / 245-40-18
-Koyokugen Aluminum wheels lugs
Etc:
-Mc Colloch HID
-Circuit Sports Boost Gauge
-Eclipes MP3 Headunit
-2 Kenwood amps
-10 inch Infinity Kappa Subwoofer
-Oddysey dry cell batter Full metal jacket 680
Price: $7500 OBO!!! CHEAP!
KEEP NEGATIVE COMMENTS TO YOURSELF!
THANKS ZILVIA!
http://i4.photobucket.com/albums/y142/jdmerzxceo/rps13_xd9_3.jpg
http://i4.photobucket.com/albums/y142/jdmerzxceo/rps13_xd9_1.jpg
http://i4.photobucket.com/albums/y142/jdmerzxceo/rps13_xd9_2.jpg
http://i4.photobucket.com/albums/y142/jdmerzxceo/emotions_s13.jpg
Older pic with my CR KAI's
http://i4.photobucket.com/albums/y142/jdmerzxceo/emotions_13_sr.jpg
Before swapping the motor, all fresh new goodies!
It's time for me to put her up for sale, just have to many cars and no time or money right now to build all of them. So for some of you who know me, my stuff is always legit and price great. The only thing I suggest is for the new owner to tune the car, it makes about 260RWHP at the moment but that is only at 10psi, this motor is good up to 15psi+ with proper tuning!
Note:The car will come with new front bumper and 30MM front fenders, since I cracked it on my driveway and have never repaired it. The Power Steering system will need a full bleeding, since the power steering kicks in at High RPM. The car is currently under Non-Opp registration (since I dont drive it) and must be towed or trailered away (unless you want to drive it the stickers just expired a few days ago in October).
Chassis: 1990 240SX SE *Non Sunroof, Power Windows CLEAN TITLE!
Engine:
-Blacktop SR20DET *Never seen past 10PSI
-Silvia S15 Spec R Dual Ball Bearing Turbo
-HKS Adjustable internal wastegate
-800CC Denso Side feed injectors
-Circuit Sports water lines
-Aworks Full Stainless Exhaust Manifold
-HPI (Tomei) 3 Inch Turbo Elbow
-Aworks 3 inch down pipe
-Aworks 3 inch cat elminator
-Aworks 3 inch exhaust system
-QTP 3 inch Cut out
-Aworks Front Mount intercooler (Spec S)
-Custom intercooler piping
-Greddy style intake manifold
-Aworks Oil Catch Tank
-HKS Intake filter
-Aworks 3 inch aluminum Intake
-Manual boost controller
-Apexi Power FC (D-Jetro: No MAF)
*Aworks products are made by the same company whom make HPI products in Japan!
Drivetrain:
-RPS 6 puck competition clutch
-RPS competition cover
-KAAZ 2 way Solid type LSD
Exterior:
-Uras Type 4 Aerokit (aggressive stance)
-180SX Kouki Type-X Tailights
-Custom rolled quarter panel (rear)
-Custom metallic purple paint
* NOTE: Car will be coming with brand new front bumper and 30mm wide fenders in front (cracked bumper on driveway)
Interior:
-FET Quick release
-Nardi Steering wheel
-Momo hub
-Aworks Full Race Bucket seat (driver)
-Wedge engineering brackets
Suspension:
-Apexi N1EXV full adjustable dampers
-Circuit sports front 5 lug hubs
-Ichiba rear 5 lug hubs
-Crossdrilled / slotted front rotors
-PBR Semi-racing pads
Wheels:
Work Emotion XD9 (Silver)
Front 18x9 +20 Rear: 18x10 +18
Federal tires: 225-40-18 / 245-40-18
-Koyokugen Aluminum wheels lugs
Etc:
-Mc Colloch HID
-Circuit Sports Boost Gauge
-Eclipes MP3 Headunit
-2 Kenwood amps
-10 inch Infinity Kappa Subwoofer
-Oddysey dry cell batter Full metal jacket 680
Price: $7500 OBO!!! CHEAP!
KEEP NEGATIVE COMMENTS TO YOURSELF!
THANKS ZILVIA!
http://i4.photobucket.com/albums/y142/jdmerzxceo/rps13_xd9_3.jpg
http://i4.photobucket.com/albums/y142/jdmerzxceo/rps13_xd9_1.jpg
http://i4.photobucket.com/albums/y142/jdmerzxceo/rps13_xd9_2.jpg
http://i4.photobucket.com/albums/y142/jdmerzxceo/emotions_s13.jpg
Older pic with my CR KAI's
http://i4.photobucket.com/albums/y142/jdmerzxceo/emotions_13_sr.jpg
Before swapping the motor, all fresh new goodies!