PDA

View Full Version : LED dome light and other parts not working?


mmaxeyjr
10-12-2008, 08:31 AM
Me and a buddy made a LED dome light w/ a circuit board and solder.


I was putting in my led dome light and it flashed on for a second then it turned off instantly.

So to test if the led worked itself I touched the ground to the ground on the battery and it flashed on for a short time then off.

Now my headunit doesnt work and I also noticed the trunk lights dont turn on. And theres a humming noise when i turn the key to on.

I checked some fuses, but they all seemed good and not blown.

Any ideas?

also my automatic seatbelts wont work unless the key is in the ON position. If I turn it off and open the door the seatbelt stays back instead
of moving front.
thanks

caraz
10-12-2008, 08:52 AM
I would check your fuse box for a blown fuse. Most likely the dome light fuse.

HTH

projectRDM
10-12-2008, 10:46 AM
You've obviously blown a fuse. Checking some of them is pointless, check them all. Inside and out.

ex_out
11-06-2008, 02:33 PM
Did you use resistors?

mmaxeyjr
11-06-2008, 07:15 PM
yes problems been solved. thanks