does anyone else compete in drag racing

[SRKperformance]

Does anyone on here (besides me) race in idrc or in any competitive drag racing events, or does anyone see there main focus as drag racing. I agree it gets boring at times, just curious. Id like to se if there are any other fast 240s.

[Jeff240sx]

I don't compete competitively (yet), but I do drag race at strips.
-Jeff

[SRKperformance]

how is the automatic working out for you? What turbo are you runing on your ka, what injectors.?

[SilviaDriver]

yes i do, if you are from cali, you'd hear about CMI in Sactown. Cali Modified Imports is wat CMI stands for. it is bracket racing, where you dial in a time and try and stay consistant.

[silnv]

I haven't yet but I plan on it this summer.

[240racer]

I have twice, it's pretty fun and cheap. I use it mostly as an opurtunity to drive my car all out since it is entirely too fast for the street. Also, it give consistant times, so I can compare run to run and adjustments. I don't plan on building a drag car, but my car should be able to hold it's own most places around here. That is except against my friends 400+rwhp MKIII supra. He is always the fastest car there, except the crazy mustangs.

[Jeff240sx]

Originally posted by SRKperformance
how is the automatic working out for you? What turbo are you runing on your ka, what injectors.?

Well.. if all goes correctly, I will have a 5-speed when my engine gets back. Also.. I was running stock injectors, but now I have 50# injectors.
-Jeff

[SRKperformance]

good stuff. im building one sr in my garage right now. Funds are kind of dry just been lazy at work, but im getting the fuel system converted to top feed with a custom fuel rail and 55lb/hr injectors with a custom ecu upgrade. Im also going to be using an aeromotive fpr. with the t3/t25 that is on the car right now. Im just using stock 370ccs until i get the fuel stuff at the begining of feb. Top feed should be fun. I already use the 255 lt/hr walbro high pressure fp. My other sr is on a stand. I already have the other head for it port and polished with a 3 angle valve job and toda valve springs. Once the fuel system is paid for ill be looking to buy some arias pistons and eagle rods.

[ca18det]

i drag race. last year i focused on my girlfriends car. i needed a break from my own car. this year i have a built ca18det. i am gonn atry to get to as many events i can get to this year. i have one hella monster waiting so i hope the new year brings good fortune.

[SRKperformance]

whats up with your ca? to4/t3 style? custom manifold? 720cc? standalone?

[ca18det]

ca18det: je pistons stock rods shot peened and polished cryo treated bottom end 272 cams hks valve springs hks manifold hks t04r turbo hks wastegate os giken clutch port and polished head 720cc injectors(although i may be moving to 880's) sds em3-f standalone. i am currently working on a deal for a garage ram surge tank. this is the major stuff i have all the bolts and a 3 row intercooler as well. j30 rear end and a ca18 bell housing mated to a sr back half.

[boosteds14]

i will be competing this season. should be doin the whole east coast. finally bought a trailer.

[jOeHaCk98]

Originally posted by SRKperformance
good stuff. im building one sr in my garage right now. Funds are kind of dry just been lazy at work, but im getting the fuel system converted to top feed with a custom fuel rail and 55lb/hr injectors with a custom ecu upgrade. Im also going to be using an aeromotive fpr. with the t3/t25 that is on the car right now. Im just using stock 370ccs until i get the fuel stuff at the begining of feb. Top feed should be fun. I already use the 255 lt/hr walbro high pressure fp. My other sr is on a stand. I already have the other head for it port and polished with a 3 angle valve job and toda valve springs. Once the fuel system is paid for ill be looking to buy some arias pistons and eagle rods.


IIRC the sr comes with a 3 angle job from the factory.

[SRKperformance]

sorry i sliped on that i actually had it redone with a 5 angle valve job, i was thinking stock, i had the whole head outserviced to a buddy of mine and he went to town on it. I cant edit the damn post too!