PDA

View Full Version : Gauging Interest on Work Meister S2 18X12.5 -39/18X10.5 -26 5X114.3

CursedGTR
10-03-2008, 05:39 PM
I found these wheels in a shop recently and figured someone on here might want them. I cannot post pictures as of right now but they are gold spoked with about a 7 inch lip in the rear and a 6 inch or so up front. They are not to incredibly expensive but I figured the offset was a bit aggressive and only a few would be interested in something like that. The wheels are in really good condition and there is no damage to teh lips or anything like that. If you are interested in something like this let me know via PM and I will go ask the store owner to let me take pictures to send to you.

I do not want to post these up like I own them because I do not, but not alot of people here in Okinawa are looking for something that aggressive, so I figure I might be able to help out an acquaintance if I sell them for him and in return I get a good deal on some stuff in the future. Mean while you would get a good deal on these wheels as I know I would get them out of here for a really good price.

Brian

That is what I get for second guessing myself. They were S1 and pics are below.



http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5801.jpg
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5799.jpg

Rear Pad
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5800.jpg

Front Pad
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5795.jpg

Rear 1
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5793.jpg
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5792.jpg
Rear 2
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5791.jpg
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5790.jpg

Front 1
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5789.jpg
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5788.jpg

Front 2
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5787.jpg
http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5786.jpg
ross.cottrill
10-03-2008, 08:19 PM
holly f**k id like to see some pics of those baddboys!and i thought my wheels were aggressive sheesh!!!!!
LongGrain
10-03-2008, 08:32 PM
50mm overs in back w/ a decent stretch and some camber would fit the rears

30mm up front would fit them pretty easily, you could probably get by with a 20mm with a stretch and camber.
don_bagz
10-03-2008, 09:48 PM
pix puleezzz!!!
Este510
10-04-2008, 01:37 AM
To fit these all you need is 1,000 mm fenders.
ross.cottrill
10-04-2008, 07:35 AM
50mm overs in back w/ a decent stretch and some camber would fit the rears

30mm up front would fit them pretty easily, you could probably get by with a 20mm with a stretch and camber.

are you serious?im going to have trouble with mine and those put them to shame!!!sorry but blister kit need only apply!(if that!)
Marcus
10-04-2008, 03:29 PM
are you serious?im going to have trouble with mine and those put them to shame!!!sorry but blister kit need only apply!(if that!)



word.. 50mil overs are good for 12s +0s...40 more mil of offset isnt small. hah. and an extra half inch of width...


these would probably fit like those 17x10s -80 or whatever was for sale...
LongGrain
10-04-2008, 03:45 PM
ehh i just did the measuring comparing my fenders/wheels.

i have ALMOST 2" of play between my tire and fender

these wheels stick out 2.8" farther than mine. so you need to come up with a stretch/camber combo that will tuck another .8" away (roughly) doesnt seem that difficult to me..

although with the fronts i was a little brave saying they would fit with 20mm, 30 would be needed...
jjjjjjjjjjjjjjjjjjjjjjjjj
10-05-2008, 05:10 PM
hey whats the pricing on these bad boys shipped to 96706 ewa beach hawaii???
SlideAlliance
10-05-2008, 11:25 PM
Brian, a little too much for my car, if you get around 12/12.5 0 to -10 I'm in. Gotta be chrome though.

Someone buy these, Brian has legit as fuck wheels
IdriveaNissan
10-06-2008, 12:22 AM
where r teh pixatures
sr20boostn20
10-06-2008, 09:09 AM
i pmed u like a week ago
99maxgtr
10-06-2008, 06:27 PM
i would get these but the offsets are way to weak for my stock rolled and pulled fenders.
.
.
..
....
......
but seriously i think im speaking for everyone when i say "PPIIICCTTAARRSSSSS!!!!"
jk26
10-07-2008, 09:46 AM
Thats some crazy lip ive got a meister 18x12 -20 and work says its a 6.8 inch lip so that has to be atleast 7.5. VERY NICE..
nosanhere
10-07-2008, 05:07 PM
i pmed u like a week ago

Yea I pmed him a while ago as well maybe he's just getting prices/pics or it may just not go through lol
SlideAlliance
10-07-2008, 11:57 PM
He's busy guys, he will get back to you when he gets a chance.
CursedGTR
10-08-2008, 05:02 AM
I been busy as hell with work this week. I should be able to get away and get pics tomorrow or Friday. I swear to god it has been a week since I slept.:hyper:

Brian
JFoxx
10-08-2008, 08:20 AM
im feeling brave......if the price isnt too rediculous shipped to socal, i might consider these....
DUFFM4N
10-08-2008, 12:42 PM
wait...so you saw them in a shop

you dont own them?
and dont know if they're for sale or not?
and have to ask if its ok to post pics from the person who owns them?

this thread is fucking retarded

:lockd::lockd::lockd::lockd::lockd:
s13poop
10-08-2008, 12:43 PM
^ :rofl:

this one fails hard my friend
adrians_s13
10-08-2008, 01:05 PM
fail..................
vodka2
10-08-2008, 10:45 PM
i offer 1k ... since there are no pics
don henley
10-09-2008, 02:29 AM
You didn't even know what kind of wheel you were posting. I suggest next time, at least know what you're trying to sell (whether or not you own the wheels are a completely different matter..)
Slow Poke
10-09-2008, 07:37 AM
He is trying to help you guys out and all you wanna do is bitch...

If your not interested DON'T FUCKING POST!
jjjjjjjjjjjjjjjjjjjjjjjjj
10-09-2008, 11:06 AM
He is trying to help you guys out and all you wanna do is bitch...

If your not interested DON'T FUCKING POST!

x2 on that one^^^

please lmk whats good when you have a chance. moneys in the bank now just waiting for the o.k.
DUFFM4N
10-09-2008, 11:52 AM
He is trying to help you guys out and all you wanna do is bitch...

If your not interested DON'T FUCKING POST!

calm down there "captain save a hoe"
don henley
10-09-2008, 12:47 PM
Well you don't know that he's helping us until someone actually buys them (at a "good" price as advertised) and gets them, right?
Koukidrftr
10-09-2008, 01:31 PM
are you serious?im going to have trouble with mine and those put them to shame!!!sorry but blister kit need only apply!(if that!)

I agree! I have 18x12 -45 meisters in the rear and had to invest in the blister to make them fit! There is no way in hell you could fit them with the 50mm kit
ZenkiCam
10-09-2008, 01:58 PM
who are you nakai-san?
jjjjjjjjjjjjjjjjjjjjjjjjj
10-10-2008, 01:07 AM
I agree! I have 18x12 -45 meisters in the rear and had to invest in the blister to make them fit! There is no way in hell you could fit them with the 50mm kit

damn!!! i was planning on putting these on my stock body rolled and pulled.
CursedGTR
10-10-2008, 04:19 AM
Bumps for pics being posted
cc4usmc
10-10-2008, 04:33 AM
damn!!! i was planning on putting these on my stock body rolled and pulled.

I hope you're not serious.

Bumps for pics being posted

Hot wheels. If I were you, I'd make a new thread since you had quite a few people trashed this one.
CursedGTR
10-10-2008, 04:53 AM
wait...so you saw them in a shop

you dont own them?
and dont know if they're for sale or not?
and have to ask if its ok to post pics from the person who owns them?

this thread is fucking retarded

:lockd::lockd::lockd::lockd::lockd:

Well if you could read and comprehend I know they are for sale, I talked to shop owner about buyig them myself, but I decided against it. However, I was not going to post them up here without his permission.

Funny thing about being a Marine is you work on a 24 hour clock so it took me a few days to get down there and get his permission to post the pics.

So yeah they are for sale, They are available, I will go get them for you should you decide to buy them. But then again if you could read and subsequently COMPREHEND the second paragraph of the original post you would have known it since I said flat out that I did not own them and had only taken a look at them. Without pictures I kind of forgot if they were 3 piece or not and went for broke. No biggie though, you either want them or you don't. But I suggest you use your money for an English 101 class or something along those lines.

Brian
CursedGTR
10-10-2008, 04:56 AM
^ :rofl:

this one fails hard my friend

Read the reply I gave to your little friend up there. I will find shit liek this from time to time. If I do not want it I will try to get permission to offer it up here, until that permission is attained I am not going to do shit until I talk to him face to face and let him know there is interest if he will let me take pictures.

HENCE THE REASON THIS IS A GAUGING INTEREST THREAD AND NOT A FOR SALE THREAD.

YOU FAIL AT READING TOO
CursedGTR
10-10-2008, 05:02 AM
You didn't even know what kind of wheel you were posting. I suggest next time, at least know what you're trying to sell (whether or not you own the wheels are a completely different matter..)

AGAIN THEY ARE NOT MINE. JUST THOUGHT SOME PEOPLE HERE MIGHT LIKE THEM.

I have gone to Nissan to order shit for people on this site, picked up shit routinely and done things for nothing more than gas money. I saw these and said "holy shit those are a little deep for me" "Let me see if there is any interest stateside" Old boy said "go for it" I left and was not able to make it back down due to an exercise which ended today. So anymore of you guys want to flame me for it go ahead. Just make sure you are never one of the guys that sends me some lame ass PM asking me to sell you some shit during a part out or go find some part you are looking for and can't find because I will be the one to have it and still tell you I can't help your ass out.
CursedGTR
10-10-2008, 05:30 AM
Now that I am done replying to all of the BULLSHIT in this thread, PM me and I will give you the price (When I quote you a price it includes shipping, paypal fees, Insurance and packaging costs).

Not interested?? No big deal. Just don't clog my PM box or thread, skeptic, move the fuck on, my rep is most important to me over anything and I will never rip someone off especially after being ripped off myself by another member on this website a few months ago.
DUFFM4N
10-10-2008, 11:58 AM
Well if you could read and comprehend I know they are for sale, I talked to shop owner about buyig them myself, but I decided against it. However, I was not going to post them up here without his permission.

Funny thing about being a Marine is you work on a 24 hour clock so it took me a few days to get down there and get his permission to post the pics.

So yeah they are for sale, They are available, I will go get them for you should you decide to buy them. But then again if you could read and subsequently COMPREHEND the second paragraph of the original post you would have known it since I said flat out that I did not own them and had only taken a look at them. Without pictures I kind of forgot if they were 3 piece or not and went for broke. No biggie though, you either want them or you don't. But I suggest you use your money for an English 101 class or something along those lines.

Brian

nowhere in your initial post does it say "i was going to buy them, but decided not to"...it states:

"I found these wheels in a shop recently and figured someone on here might want them"

i dont see where i failed to not comprehend what you wrote above^^

...maybe if you werent so CLOSED minded and thinking you're always right (as i find some marines are...sad, but a lot of the times true) then you would have saw that when i posted, i was going through all the important points of your post that i found stupid...seeing as how the thread lacked A LOT of information, thats why i suggested it being locked

you should have just waited until you had all the right info needed to make a proper for sale thread, because you knew people were going to ask for the same info over and over, just so they can nut all over the wheels but NOT buy them...so good luck with your sale (oops, they're not even your wheels)...but the thread is prolly gonna get locked anyways, seeing as how you've gone over your "bump" limit

multi-quote button....works wonders

...have a good day sweetcheeks
SlideAlliance
10-10-2008, 01:16 PM
Jesus fucking christ.

All of you kids bitching can't fit them anyway so shut up.

Brain's legit, you all fail.



I say get this thread locked and start a freshy Brian. See if you can get me some Chrome 10's and 12's, I need spares
jjjjjjjjjjjjjjjjjjjjjjjjj
10-10-2008, 01:30 PM
pm sent!!! please lmk when you get a chance. thanks

and dont let all those other guys get at you. they aint even interested in buying them anyways. its all the same guys in everyones fs post just trying to find something to nitpick on. aka haters. they aint got nothing else better to do than go online and talk smack about everyones post to make themselves feel better. thats probably why theyre online to begin with cuz their own friends are sick of their smack or probably dont even have any.

I hope you're not serious.


but i am????????????
SlideAlliance
10-10-2008, 02:07 PM
pm sent!!! please lmk when you get a chance. thanks

and dont let all those other guys get at you. they aint even interested in buying them anyways. its all the same guys in everyones fs post just trying to find something to nitpick on. aka haters. they aint got nothing else better to do than go online and talk smack about everyones post to make themselves feel better. thats probably why theyre online to begin with cuz their own friends are sick of their smack or probably dont even have any.



but i am????????????


It's funny how people who CAN'T fit the wheels always bitch. :fawkd:



Buy them and post pics when you get them on.
DUFFM4N
10-10-2008, 03:18 PM
no bitching...just stating facts, but feel free to continue with your nut swinging party :ghey:
jjjjjjjjjjjjjjjjjjjjjjjjj
10-10-2008, 04:01 PM
heres a pic of some wheels on a stock body coupe with not too much camber. that guy did it proper!!! 18x10.5(-7) 18x12(-+0).

FS:Work Bersaglios 18's - ForumsHawaii (http://www.forumshawaii.net/vbb/showthread.php?t=422119&highlight=bersaglios)

they are on my gfs old vert now with 30/50 widebody and are pretty sunken in the rears. a 30mm spacer would do pretty good.

gotta figure there aint no comps here in hawaii so might as well look good sliding where ever we can. max camber ftmf fuk of it!!!! anti-stretchers need not apply
CursedGTR
10-10-2008, 05:53 PM
Jesus fucking christ.

All of you kids bitching can't fit them anyway so shut up.

Brain's legit, you all fail.



I say get this thread locked and start a freshy Brian. See if you can get me some Chrome 10's and 12's, I need spares

I got your back, I am still looking around for you.

Mod's can we get a lock?
CursedGTR
10-10-2008, 06:24 PM
PM sent for Lock/Delete
CursedGTR
10-10-2008, 06:48 PM
...have a good day sweetcheeks

I was actually interested in your comment until that sentence right there.

Just because you like dick doesn't mean you can refer to me with a pet name. Had you said that to my face you might have been hurt pretty bad.
Phlip
10-10-2008, 06:51 PM
Closed at OP request