silvia conversion

[ludakris]

Hey guys, I was wondering if any of you know of any links on how to do an
s13 conversion onto a coupe. I know it should be a plug and play but I just want a guide on how to do it.

[nismo627]

all you have to do is take the old front end off and make sure you save all the nuts and bolts. then just do the reverse order when you put it back together. i just did mine last week. took me about 3-4 hours to do it in the dark with no write up.

[ludakris]

Haha in the dark. Did you use the same bumper support you had on there already or was that something needed for the swap?

[nismo627]

haha yes in the dark. in my driveway. thats the only thing that made it tricky. the conversion that i bought came with the silvia bumper support. i purchased mine from jgy. i know there is a way to modify the stock one but if you can find a kit that includes the support i would recomend doing that. but if your not so lucky and cant find a kit with the silvia support there is a couple places i found that tell you how to modify the stock one. either look on this site, 240sxforums.com, or just google it like i do with everything. Josh

[ludakris]

Thanks for the info.

[mrmephistopheles]

If you can loosen bolts, remove parts, install different parts and tighten bolts, you can do it without a walkthrough.