translate 4 me if you read japanese

[cIutchkick]

i have the greddy type-s coilovers and my front coilovers are not going low enough. i am looking at the information about the coilovers from the trust website but its all in japanese.. basically all i need to kno is about the lower part of the coilover. the part where the greddy sticker is. i see on the picture below that you can adjust the lowering height by the bottom but i cannot read to know how to do it. any help would be appreciated it

here is the page in reference
Æ’gƒ‰ƒXÆ’g Æ’TÆ’XÆ’yƒ“ƒVƒ‡ƒ“&Æ’XÆ’vÆ’Å*ƒ“ƒO GReddy Æ’pÆ’tÆ’HÂ�[Æ’}ƒ“ƒXÆ’_ƒ“ƒpÂ�[Type-S (http://www.trust-power.com/06sus_spring/performance_dumper.html)

[SidewayZ-s14]

Not sure if this will help, but i do see a button there that says "English"

[cIutchkick]

the instructions are an image and it doesnt translate the picture

[tt99ol]

you turn it
yes its that simple
loosen the collar right above it then turn the lower part
its threaded
you weren't just sagging spring to lower it before were you?

[cIutchkick]

havent driven on them b/c i was doing motor swap.. if i understand you correctly.. all i was doing before was lowering the front half way with the top 2 adjustment nuts.. and after halfway the top moves away from the top of the plate

[xplicit240]

you have to loosen the main sleeve itself.

http://greddy.com/img/PHP/products/jpg/579.jpg

the purple ring closest to the greddy sticker will move the whole collar up and down. if your using just the rings nearest to the spring your just pre loading the springs which will = blown suspension.

[cIutchkick]

perfect info thanx. ima adjust it now

[tt99ol]

yeah thats what i was saying
the spring should be snug in there
just enough so that you can spin the spring by hand
but not move it up and down
the lower part is where all the adjustment should come from
just loosen the bottom "nut" then turn the part that has the sticker on it
it moves up and down
there are other threads on how to adjust coilovers too
with diagrams too
just do a search

[ser-ic]

i have the greddy type-s coilovers and my front coilovers are not going low enough. i am looking at the information about the coilovers from the trust website but its all in japanese.. basically all i need to kno is about the lower part of the coilover. the part where the greddy sticker is. i see on the picture below that you can adjust the lowering height by the bottom but i cannot read to know how to do it. any help would be appreciated it

here is the page in reference
ƒgƒ‰ƒXƒg ƒTƒXƒyƒ“ƒVƒ‡ƒ“&ƒXƒvƒŠƒ“ƒO GReddy ƒpƒtƒH[ƒ}ƒ“ƒXƒ_ƒ“ƒp[Type-S (http://www.trust-power.com/06sus_spring/performance_dumper.html)


It say's "We are filling Bankruptcy :aw: "