PDA

View Full Version : SR Swap Questions. What goes where. What is this? With PICS!


SpuGen
09-16-2008, 01:42 AM
Its a long story, but basically, half of it was pulled apart for rebuild.. but decided against it.
Now I don't remember what goes where.
And what the hell that thing is.

Pics!

Exhaust Manifold. Firewall side.
What is this, and where does it go?
http://img.photobucket.com/albums/v198/Mugen604/DSC01059.jpg

Where does this vac line go? On the Valve cover T? and which side if it does.
http://img.photobucket.com/albums/v198/Mugen604/DSC01058.jpg

Intake side. Where does this line lead to?
http://img.photobucket.com/albums/v198/Mugen604/DSC01057.jpg

I'm assuming I got this line on correctly.
http://img.photobucket.com/albums/v198/Mugen604/DSC01056.jpg

Is this right?
Where does the middle connect to?
Or what is it supposed to be connected to?
http://img.photobucket.com/albums/v198/Mugen604/DSC01054.jpg

Does anyone recognize what this line is for?
http://img.photobucket.com/albums/v198/Mugen604/DSC01053.jpg

And Finally.
The spark plugs came as 6. I bought 7's.
and as you can tell from the pic, its mega rusty.
Should I be worried?
http://img.photobucket.com/albums/v198/Mugen604/DSC01061.jpg

THANK YOU.

japside4life
09-16-2008, 07:56 AM
oh wow lol well thats alot of shit but

#1 crank case breather, hook that up to the T in the valve cover with a 5/8 hose and run your catch can off the other side

#2 is suppose to go to the factory catch can but yours isnt there so refer to what i said in #1

#3 thts your IACV hose, it needs to go to your cold pipe

#4 looks like your tugging on the throttle body coolant line, bolt that bracket down underneat the manifold or just get rid of that bracket and tie that line up somewhre

#5 is your negative battery ground cable, hook one end to the neg bat post, the middle loop to the frame rail, and your loop on the end to the intake manifold

#6 thats your brake booster fitting and hose
one end goes to the intake manifold for vaccum, but yours has been cut it looks like so the hose will need tobe replaced, it goes from the manifold to the the check valve on the firewall and then to your booster

#7 just replace the plug, you dont need iridiums, just get a ngk bkr7e you willbe fine.