PDA

View Full Version : Nismo Key?


Addicted2Kouki
09-11-2008, 06:16 PM
Anyone know where I can get this key?

I got one of them when I first bought my car some years ago.
A couple months ago I got pulled over and searched for about 1 hr.
They saw this key in my wallet because it was my spare and confiscated it.
I didn't really miss it until now.

Problem is...these have been discontinued.

I'm feeling a bit nostalgic.
Anyone wanna help me out? possibly point me in the right direction...
Searching usually puts me in another dead end because its discontinued.
http://www.nengun.com/image/catalogue/original/nengun-0020-00-nismo-key_discontinued.jpg

burnsauto
09-11-2008, 06:22 PM
for the S chassis...its actually discontinued. Although, they still make it for the GTR, which has the same profile as the S chassis, its just longer than the S chassis version.

I know a few places that still can get them. I'll give you a link soon.

BoostedCoupe
09-11-2008, 07:33 PM
ebay. but its just a key

Petoria
09-11-2008, 07:46 PM
Why didn't you get it back from the cops?

P_856
09-11-2008, 07:50 PM
i think this is what ur lookin for kinda hard to tell tho from the bad pic since ebay links arent allowed heres the Item number: 320295981268
u can get a GTR key for less then half the price of the nismo one tho Item number: 320297588808

projectRDM
09-11-2008, 07:52 PM
I found my old one last week, should have snagged the key cylinders before I sold the old chassis off. Now I have a $60 paperweight. It's pretty though. I wonder if you could recut an existing key.

IES13
09-11-2008, 07:55 PM
Check with Justin at West Cov Nissan.

hustlervibes
09-11-2008, 08:02 PM
Impossible to find. Good luck. Best bet is to find a used one and get the key cylinders too.

Cr8zyDrifter
09-11-2008, 08:06 PM
why would the cops take your key, thats kinda stupid.

Addicted2Kouki
09-11-2008, 08:12 PM
for the S chassis...its actually discontinued. Although, they still make it for the GTR, which has the same profile as the S chassis, its just longer than the S chassis version.

I know a few places that still can get them. I'll give you a link soon.

Ehhh I don't really want a key that says GTR if I don't have a skyline.
Wouldn't really make sense.

Where's my link?! haha :naughty:

ebay. but its just a key

Searching ebay ends up with a bunch of crap and fake nismo keys.
Yes, I understand it is just a key, but it has meaning for me and i want that key.

Why didn't you get it back from the cops?

Fuck if i know... :-/ They just took it and I never got it back.

i think this is what ur lookin for kinda hard to tell tho from the bad pic since ebay links arent allowed heres the Item number: 320295981268
u can get a GTR key for less then half the price of the nismo one tho Item number: 320297588808

Thats the one! but shit! $100 plus shipping! thats overkill.

I found my old one last week, should have snagged the key cylinders before I sold the old chassis off. Now I have a $60 paperweight. It's pretty though. I wonder if you could recut an existing key.

LOL it is. Recutting is possible if the key being cut has a bigger profile than the one that is being copied. Kinda hard to refill the gaps unless you welded it..:ugh:

Check with Justin at West Cov Nissan.

Ill shoot him a PM.

Impossible to find. Good luck. Best bet is to find a used one and get the key cylinders too.

I hope not, although its seeming like it is.

hustlervibes
09-11-2008, 09:14 PM
I've been looking for a while now as well with no luck. There are no dealerships that can get them and I've talked to Justin already as well. I heard once that you can get the longer version of the key and cut it down shorter, but I don't even know if the key profiles are the same. They are called like 10 cut and 20 cut or something and we need the discontinued 10 cut while the longer one is still in production iirc.

S13Boosts
09-11-2008, 09:17 PM
this guy LOL try e gay

driftedfc3s
09-12-2008, 03:03 PM
eBay Motors: NISMO DESIGN KEY REAL JDM (item 320295981268 end time Sep-12-08 22:10:54 PDT) (http://cgi.ebay.com/ebaymotors/NISMO-DESIGN-KEY-REAL-JDM_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1163Q7c39Q3a1 Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2e c0Q2em14QQhashZitem320295981268QQitemZ320295981268 )

GENUINE NISMO BLANK KEY BRAND NEW & THE ONLY 1 ON EBAY - eBay (item 110288855665 end time Sep-22-08 03:25:47 PDT) (http://cgi.ebay.com/GENUINE-NISMO-BLANK-KEY-BRAND-NEW-THE-ONLY-1-ON-EBAY_W0QQitemZ110288855665QQcmdZViewItem?hash=item 110288855665&_trksid=p3286.m63.l1177)

There were two that I found within 13 seconds of opening up eBay.

hustlervibes
09-12-2008, 03:10 PM
eBay Motors: NISMO DESIGN KEY REAL JDM (item 320295981268 end time Sep-12-08 22:10:54 PDT) (http://cgi.ebay.com/ebaymotors/NISMO-DESIGN-KEY-REAL-JDM_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1163Q7c39Q3a1 Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2e c0Q2em14QQhashZitem320295981268QQitemZ320295981268 )

GENUINE NISMO BLANK KEY BRAND NEW & THE ONLY 1 ON EBAY - eBay (item 110288855665 end time Sep-22-08 03:25:47 PDT) (http://cgi.ebay.com/GENUINE-NISMO-BLANK-KEY-BRAND-NEW-THE-ONLY-1-ON-EBAY_W0QQitemZ110288855665QQcmdZViewItem?hash=item 110288855665&_trksid=p3286.m63.l1177)

There were two that I found within 13 seconds of opening up eBay.

In the second ad this is what I was talking about...

I HAVE HAD THIS KEY CUT TO FIT MY R33 GTST AND SOME OF THE OTHER ONES I HAVE SOLD HAVE BEEN CUT FOR THE R32 GTR AND R33GTR AND ALSO S13 AND S14 200SX'S. ANY DECENT SECURITY FIRM OR KEYCUTTERS CAN DO THIS WITH EASE. KEY HAS TO BE CUT FROM A 10 POINT TO AN 8 POINT KEY

It's not the one technically meant for our cars, but can be cut shorter to made work...maybe?

burnsauto
09-12-2008, 04:37 PM
sounds like a viable option...you'll just have to get a hold of a good key cutter/locksmith to do it.

turbotagteam
09-12-2008, 08:26 PM
Hahaha..... I have one for my car. Didn't realize how cool it was untill now :)

YellowFox
09-12-2008, 08:58 PM
I remembered Rare Trick having them.. but we all know what happened to that :(

BLKS13
09-13-2008, 02:54 PM
I found my old one last week, should have snagged the key cylinders before I sold the old chassis off. Now I have a $60 paperweight. It's pretty though. I wonder if you could recut an existing key.

No recutting, just make your cylinders work with that key. I've done it before :snoop: