PDA

View Full Version : C's Short Shifter For KA/SR


Peas
09-10-2008, 08:24 PM
Hey everyone. I have an original C's Short Throw Shifter for S13/S14. It's been used for about a year, but have been sitting in the garage for the past few months. The shifter bushing is good, shifts smooth w/ no problems. Really fun to use versus the stock one.

Here's some photos (super detailed!):

http://www.pnoise.com/club240/cs_shifter/1.jpg

http://pnoise.com/club240/cs_shifter/2.jpg

http://pnoise.com/club240/cs_shifter/3.jpg

http://pnoise.com/club240/cs_shifter/4.jpg

I'm including the shifter plate to make installation easier, so its like installing a B&M shifter. I painted the plate silver to make a clean looking set-up, but as we all know, that makes no difference, haha. If you buy it, be sure to buy some RTV sealant for the plate, or, if remove it from the plate and install it the normal way (which is still easy), you'll just need a few tools to remove the C-ring in the stock shifter assembly.

I see someone else selling theirs here, however I have no box like he does.
I'll price mine at $150 shipped+paypal'd. Shipped to you the next day via USPS Priority Mail w/ confirmation/tracking number. Or, $125 picked-up in Las Vegas, NV.

Give me a pm or email me if you have any questions: oranqe[at]hotmail.com

Pick this really nice shifter up! I need the scratch! Thank you!

s14jesse
09-10-2008, 08:33 PM
do u know wat thread pitch is that on the shifter?

punxva
09-10-2008, 09:32 PM
the stock nissan shifter thread pitch... i'm interested, i need to see how the money is on friday if it's not sold i'll take it

Peas
09-10-2008, 09:33 PM
Thread pitch? Unsure. It fits my Nismo shifter knob, therefore I think it's safe to assume it will fit any Nissan type shift knob. You shouldn't have a problem making your shift-knob fit, unless yours is from another car other than Nissan. But I have seen someone use a 350Z knob on an S2000. :)

Peas
09-10-2008, 09:37 PM
No problem, if you guys want to race to buy it, first one to PM me saying you're ready to send a paypal payment wins. My email is oranqe[at]hotmail.com for paypal. Will send you a PM back to say its yours but you have to send payment within the same time period.

Pick it up quick. Kept good care of it, hope the next buyer has as much fun as I had w/ it.

ctsedan
09-10-2008, 09:39 PM
pmed you....

Peas
09-10-2008, 09:45 PM
Gotcha. Replied to you. Check your email.

Peas
09-10-2008, 10:56 PM
SOLD friends. Thanks for viewing.

DUBCITY
09-10-2008, 10:57 PM
does it say c's anywhere on it? how do you know its authentic and not just an ebay deal?

Peas
09-10-2008, 11:31 PM
The label I tried to capture on the top of the shifter had the japanese insignia on it, but it faded. Basically, can't really tell unless you have it person. The shifter piece should be one-piece, some of the knock-off ebay ones are 2-piece. The bushings break after a few months, these don't. But if they're two piece, its definitely not a C's. The shifter piece shouldn't disconnect or separate from the base either. They should come pre-assembled. Also, the bushings are cheap on the other mimics, like the Megan shifters, I've seen those bushings go out and break off when they shouldn't. They should last as long as the car.

Wish I can say anything else, but mine is C's. I've tried the knock-offs, I know its not a fake. You can tell when you pick it up. The fakes just don't feel right, you know?

Anyway, mine hasn't broke, never had a problem. Bushings never worn out, doesn't grind, etc. I'm not the type to rip anyone off and I've been on here for too long a time.

If there's a problem, I'll fix it, but there shouldn't be. Anyway, its sold, its done.

Thanks for your concern though, its a good point.