Sr20 Swap Parts List

[steve_o1989]

I am putting together a parts list for an s14sr swap to get the general idea of what I am going to be looking at budget wise. I think I have it pretty much together, but I have been brainstorming now for so long that I am probably missing something. I tried searching for a complete parts list but no luck.

This is what I have so far, what do you think? Let me know if I should include anything. Thnaks.

S14 Sr20det - $2300-$3000 (depending where I get it)
Radiator - $200-$300
Upper/lower coolant hoses - $50-$100
Fans - $100-$200
Intercooler kit - $320-$500
Downpipe - $50-$200
Catback - $300-$500
Testpipe - $30-$100
Clutch - $250-$400
Resurface Flywheel - ~$50
Fuel Pump - $100
Z32 Fuel filter - $30
FPR - $150
Boost Gauge - $50
Water pump - $90
Oil pump - $250
Front seal - $15
Rear seal -$20
Motor mounts - $170-200

[bl3ujay07]

i'de go with project nissan motor mounts. Solid, good item for price, although they have gone up significantly. People say car rattles/shakes a lot, not really, just sort of vibrates.

[wangan_cruiser]

just get the full gasket kit for $200 from frsport.com.

itll save you more when you find out that all the gasket needs to be replaced.

[steve_o1989]

^ Yeah I was thinking that too. I will need it for the oil pump, and the water pump anyways, plus it would just be good to have.

For mounts I was thinking of getting the Nismo mounts but, depending on the budget, I may stick with the originals if they are still in good condition.

[rb25powered240sx]

Are you going to attempt to do the wiring harness yourself or pay someone to do it? Just another thing you want to add to your parts list if you dont plan on doing it yourself

[s13drob]

full gasket kit $150 from west covina nissan or a upper gasket kit from courtesy nissan for $80. i also think u can get nismo mounts (motor & tranny) for $150 also.

just to help u on shopping^^^

[jdmstatuS13]

full gasket kit $150 from west covina nissan or a upper gasket kit from courtesy nissan for $80. i also think u can get nismo mounts (motor & tranny) for $150 also.

just to help u on shopping^^^


hells yeah man, im doin my swap too...hit me up wih a place to get them mounts yeah ?? :sadwavey:

[steve_o1989]

I will do the wiring harness myself, aswell as all the labour. Only thing someone else will do is resurface the flywheel.

On that last note, would it be worth it getting a lightened flywheel? I little quicker rev wouldn't be a bad thing, but I don't want to loose drivability going toolight with it. The car will be my daily for part of the year.

[shifts13]

if you can use the stock clutch fan/shroud with whatever rad your going to get keep it. I had an altima fan blowing on high and my car was running hotter than it was with the stock fan.But I also have a FMIC. and it'll save you some $$

[xdumbxguyx]

look for a front clip so u wont have to look for nick nacks while doing your swap
most things u can keep stock for the time being to save yourself money for when things go bad... but things u should change that are probably going to be a pain is front and rear main seal, new v belts, check if the clutch is still good, used the stock clutch fan / shroud, u dont really need a fpr til later on. an additional mod that i would recommend the most is rocker arm stoppers. SR's have a big problem with the rocker arm jumping.

[sbc]

You live in Saskatchewan so you are most likely going to be ordering most things. Shipping and duties adds up in a hurry.