C-unit
09-03-2008, 09:32 PM
Did I just say I am quiting the scene!!!!??? HELL NO, but atleast for now I will be out of the scene. I'll still keep one of my skyline but I am not going to put all my expensive parts on it anymore. Just going to keep it clean. As life moves on, I found some better investment that I can put my money on. However I will still bring in PIMPING rims for you guys and rare JDM parts!!! Enough BS and here they are:
Performance:
Greddy R-spec FMIC for RB20/25
This kit is MINT and its retail over $1300USD. It uses stock piping location which means it uses LESS piping compare to the "over the rad" styel. No trimming of Rebar require. Prefect fitment. It comes with instruction as well.
$690
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP4817.jpg
Greddy Twin Oil cooler Core:
I am selling the whole oil cooler system. The cores are not in the Best condition but it works, no leak or anything. It comes with the oil filter relocation kit and all steel braided lines. I can also throw in one 90degreee AN-8 fittings and one straight AN-8 fittings.
sold
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP4974.jpg
ARC oil pan for SR20.
This is a Brand new Oil Pan from ARC, nothing can beat the rareness of this item!!!!!!
$380
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5117.jpg
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5119.jpg
XS-Power Top mount manifold for SR20
This is a Brand new manifold. Got it from a member off zilvia.
$100
38mm ExoticSpeed External Wastegate.
This is a Brand new wastegate from ExoticSpeed. This wastegate comes with 2 more flanges for the dump pipe. This is also a high quality piece that is made is Canada. It is not those EBAY knock off wastegate. It's loaded with a 1bar spring.
$180
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5109.jpg
Drivetrain:
Nismo 2way LSD. It's recently been rebuild. It locks up super easy. Pretty sure most people know what they are. It has a 5bolt half shaft. Comes with Pumpkin
$650
No pics ATM
Blitz Active Twin Plate Clutch.
This Clutch is brand new and never install. It is a sprung type with flywheel combo. This clutch is for SR20DET S13/S14. It can hold up to 550hp. I got this wanting to put in my SR but never ended up doing it.
$1300
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5112.jpg
Handling
Brembo F40 with 330mm 2pcs rotors
Calipers are freshly painted. This set up is bigger than all 350z/G35/R34 set up out there. It comes with two set of pads and brand new stainless steel lines. They both have more than 90% meat left. Rotors have no cracks and still have tons of meat left. Prefect upgrade if you are looking to track your car.
sold
http://i214.photobucket.com/albums/cc239/GenerisLabo/suspesions/IMGP5110.jpg
Exterior:
Race On USA Rear diffuser.
This is an universal item that require custom mounting onto your car. It is also brand new with black gel coat on top.
$350
http://i214.photobucket.com/albums/cc239/GenerisLabo/exteriors/IMGP5116.jpg
Interior:
This a GTR seat. I traded my bucket seat from mwracing for this. This seat is ripped and patched.
$130
http://i214.photobucket.com/albums/cc239/GenerisLabo/interior/IMGP4829.jpg
Momo steering wheel 350mm.
It will come with a horn button and hicas hubs. I will NOT part out the hub so dont ask.
sold
Nismo steering wheel 360mm
This is a rare discontinue item from nismo. it will come with Nismo horn button and hub. Steering wheel is super mint, not a single scratch on it!!
$180
http://i214.photobucket.com/albums/cc239/GenerisLabo/interior/IMGP5107.jpg
Shipping:
Price doesn't include shipping. Local pick up are welcome.
I might have more parts coming. I will post up more when I do a full clean up of the garage this weekend. If you want any parts, feel free to PM me and I'll see if I have I get any of those parts.
Pm me or email me at [email protected] if you have any questions or concerns.
Performance:
Greddy R-spec FMIC for RB20/25
This kit is MINT and its retail over $1300USD. It uses stock piping location which means it uses LESS piping compare to the "over the rad" styel. No trimming of Rebar require. Prefect fitment. It comes with instruction as well.
$690
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP4817.jpg
Greddy Twin Oil cooler Core:
I am selling the whole oil cooler system. The cores are not in the Best condition but it works, no leak or anything. It comes with the oil filter relocation kit and all steel braided lines. I can also throw in one 90degreee AN-8 fittings and one straight AN-8 fittings.
sold
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP4974.jpg
ARC oil pan for SR20.
This is a Brand new Oil Pan from ARC, nothing can beat the rareness of this item!!!!!!
$380
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5117.jpg
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5119.jpg
XS-Power Top mount manifold for SR20
This is a Brand new manifold. Got it from a member off zilvia.
$100
38mm ExoticSpeed External Wastegate.
This is a Brand new wastegate from ExoticSpeed. This wastegate comes with 2 more flanges for the dump pipe. This is also a high quality piece that is made is Canada. It is not those EBAY knock off wastegate. It's loaded with a 1bar spring.
$180
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5109.jpg
Drivetrain:
Nismo 2way LSD. It's recently been rebuild. It locks up super easy. Pretty sure most people know what they are. It has a 5bolt half shaft. Comes with Pumpkin
$650
No pics ATM
Blitz Active Twin Plate Clutch.
This Clutch is brand new and never install. It is a sprung type with flywheel combo. This clutch is for SR20DET S13/S14. It can hold up to 550hp. I got this wanting to put in my SR but never ended up doing it.
$1300
http://i214.photobucket.com/albums/cc239/GenerisLabo/engine/IMGP5112.jpg
Handling
Brembo F40 with 330mm 2pcs rotors
Calipers are freshly painted. This set up is bigger than all 350z/G35/R34 set up out there. It comes with two set of pads and brand new stainless steel lines. They both have more than 90% meat left. Rotors have no cracks and still have tons of meat left. Prefect upgrade if you are looking to track your car.
sold
http://i214.photobucket.com/albums/cc239/GenerisLabo/suspesions/IMGP5110.jpg
Exterior:
Race On USA Rear diffuser.
This is an universal item that require custom mounting onto your car. It is also brand new with black gel coat on top.
$350
http://i214.photobucket.com/albums/cc239/GenerisLabo/exteriors/IMGP5116.jpg
Interior:
This a GTR seat. I traded my bucket seat from mwracing for this. This seat is ripped and patched.
$130
http://i214.photobucket.com/albums/cc239/GenerisLabo/interior/IMGP4829.jpg
Momo steering wheel 350mm.
It will come with a horn button and hicas hubs. I will NOT part out the hub so dont ask.
sold
Nismo steering wheel 360mm
This is a rare discontinue item from nismo. it will come with Nismo horn button and hub. Steering wheel is super mint, not a single scratch on it!!
$180
http://i214.photobucket.com/albums/cc239/GenerisLabo/interior/IMGP5107.jpg
Shipping:
Price doesn't include shipping. Local pick up are welcome.
I might have more parts coming. I will post up more when I do a full clean up of the garage this weekend. If you want any parts, feel free to PM me and I'll see if I have I get any of those parts.
Pm me or email me at [email protected] if you have any questions or concerns.