FS: Built SR20DET longblock, race ready!

[harlockssx]

I have a professionally built (S-Tec in Okinawa Japan) redtop S13 SR20DET that I'm not going to be using...starting to get out of the whole SR thing...

Zero miles since professionally built!

Wiseco forged pistons, Eagle forged rods, ARP head & main studs, high capacity finned aluminum oil pan, new oil pump assembly, Tomei 1.2mm metal head gasket, Nismo bearings, all new OEM seals & gaskets, Fully ported & race prepped head, Tomei Pro-Cam 270 12.5mm solid lifter cams (professionally installed & degreed properly) installed with Tomei solid lifters (shimmed properly with using Tomei shims), Tomei rocker arm stopper, upgraded valve springs, adj. cam gears.

I had this engine built in hopes of pushing 700 rwhp with my Full-Race turbo, but am getting out of the racing game.

Engine is inside my garage, in a metal shipping crate, and is available for inspection.

SERIOUS BUYERS ONLY!!!

Please don't waste my time if you don't have the money. I'm not looking for trades, just cash. Local Albuquerque NM sales only, unless you want to come get it from where you're located or arrange your own pickup/delivery. I'm not going to ship this again.

$4000

Don't like the price, Not my problem, keep it to yourself...

Matt 505-452-9138 or [email protected]

I do accept Pay-Pal, but will have to add their fees (3%) if you want to pay that way.

[Este510]

Do you have any pictures?

[SoguRacing]

pics would help as i am curious myself.

[pwr-adr]

bump for a legit seller and good guy!

[oki_s13]

bump for this cuz i lived in okinawa for a long time and seen some pretty serious cars come out of S-Tec so im sure its gonna do the job for whoever gets it..goodluck man

[harlockssx]

What do you want pics of? An engine in a crate? I'm not going to tear it down & disassemble the engine to show you pictures of what you can't see, sorry. If someone's serious, they can see it in person or I can get some help to get the engine out of the crate, take pictures, then re-crate it...but I'm not going to do that on a whim. It's assembled, less intake, exhaust, accessories. Just a long block.

[burnsauto]

well don't act like your doing any of us a fucking favor.

just take a damn picture, who cares if you dont find it interesting. you obviously dont want to sell it too badly if you can't even take the few minutes it takes to get a picture of the thing.

Would you blow 4k on an engine in some guys garage that you've never seen?

Do I want it? No..

but there is no reason to be like this for people who could be potential buyers.

[harlockssx]

well don't act like your doing any of us a fucking favor.

just take a damn picture, who cares if you dont find it interesting. you obviously dont want to sell it too badly if you can't even take the few minutes it takes to get a picture of the thing.

Would you blow 4k on an engine in some guys garage that you've never seen?

Do I want it? No..

but there is no reason to be like this for people who could be potential buyers.

I will do whatever the heck I please, thank you.

For whoever is a REAL buyer, I will provide what is needed. To anyone else...read above. Thanks!

Maybe if you had more than $2.00 in your pocket, you'd understand. I'd appreciate you to not use vulgar language in my thread, thank you. There's over $3500 in parts alone inside, not including the headwork, machining, professional assembly, engine & misc pieces.

Now, how am I supposed to show you the inside of an engine? This is the best I can do...

http://img.photobucket.com/albums/v76/harlockssx/DSCN0684.jpg

http://img.photobucket.com/albums/v76/harlockssx/DSCN0686.jpg

http://img.photobucket.com/albums/v76/harlockssx/DSCN0127.jpg

http://img.photobucket.com/albums/v76/harlockssx/DSCN0129.jpg

This is what it was originally built for, my old car back in Japan...

http://img.photobucket.com/albums/v76/harlockssx/DSCN0222.jpg

http://img.photobucket.com/albums/v76/harlockssx/DSCN0223.jpg

[nismostate]

i think that's all that everyone is asking for. nice setup glws.

[burnsauto]

you never know who is going to be a real buyer, so treat everyone like a rockefeller until otherwise.

Those pictures are fine, nice car btw. Thats all people were asking you to do.

[NightfireFC3S]

Check PMs ... I'll be getting out of the Army & moving back to Cruces late October.

[aNskY]

Better than pictures would be parts and machine shop reciepts. i assume you have that all in order? i dont see someone dropping 4k on a "built" engine without that.

[Style]

damn you got AC on that bad dog, what turbo kit is that?

[harlockssx]

damn you got AC on that bad dog, what turbo kit is that?

Not a "Kit" per se, a Full-Race custom GT3567R on a Jet-Hot coated Trust Top mount manifold, which I re-flanged from T-4 to T-3, since I wasn't going to run the T-78 I had. A/C was OEM on that car, no need to get rid of it!

[BoostedFd3s]

how much for the whole "turbo kit" setup?? pm price. Thanks

[Style]

i like it man, what are you doing for fans?? is this a drift car or drag?

[harlockssx]

i like it man, what are you doing for fans?? is this a drift car or drag?

Setup for more for drag, with emphasis on not solely being drag...I am not a drifter. I'm more into touge & autocross, as well as the occasional drag race. Fans are OEM Nissan Pulsar GTiR fans on a Koyo brass & copper radiator with an adj thermostatic fan controller for both fans, billion thermostat & hoses, oil cooler.

[harlockssx]

Still available....

[handinpants]

hey what is the oil filter relocation thing you have on there, in this pic?http://img.photobucket.com/albums/v76/harlockssx/DSCN0223.jpg

[SuperiorS14]

hey what is the oil filter relocation thing you have on there, in this pic?http://img.photobucket.com/albums/v76/harlockssx/DSCN0223.jpg


oil filter relocation and oil cooler kit.

[jedi03]

bad ass [email protected] have ridden in it, speedo goes faster than my rpms in any of my cars!!!!!

[xdumbxguyx]

looks like the greddy unit

[LongLiveJDM]

you have pm

[harlockssx]

Sold to LongLiveJDM

[Om1kron]

well don't act like your doing any of us a fucking favor.

just take a damn picture, who cares if you dont find it interesting. you obviously dont want to sell it too badly if you can't even take the few minutes it takes to get a picture of the thing.

Would you blow 4k on an engine in some guys garage that you've never seen?

Do I want it? No..

but there is no reason to be like this for people who could be potential buyers.

IF YOU'RE NOT GOING TO BUY IT, AND YOU'RE NOT A MODERATOR, PLEASE KINDLY SHUT THE FUCK UP!

a more constructive post to help people who may be serious buyers would've been. "can you provide flow bench numbers for the head." instead of generally saying "fully prepped custom racing head." help him sell it, don't be a dickhead and go "well if you don't have pictures nobody is going to buy it."

As if you had your paypal ready to fire off.