View Full Version : sleepy eyes... anybody have pics?
Nismo240SX
01-06-2003, 04:04 PM
i'm thinking about installing the lazy eye controller on my car. anybody done this? i would like to see the lazy eyes on a hatch with a body kit or something... please post all that you might have. thanks.
MasterOFDrift
01-06-2003, 04:37 PM
how come everybody wants to pay for the sleepy eyes when you can get it free. . . I guess the pros are that you can adjust the lights from inside your car all the time?
doh boy
01-06-2003, 04:38 PM
not my car..
silnv
01-06-2003, 04:55 PM
I think there is a right up on this in 240sx.org's FAQs
Stylin_240sx
01-07-2003, 02:02 AM
I like the sleepy eye look. But I heard it was a pain in the ass to do yourself without any kit. Is this true?
:confused:
NismoGear5
01-07-2003, 05:27 AM
Also both your headlights may be at different levels of height because they could be worn out. (When you use a controller or home made rig)
ex = one headlight slightly higher that other
FastBack 240
01-07-2003, 05:45 AM
Yea its a pain in the ass because you have to put your lights on and then open the hood and adjust the lamps, but this is only if you go the free route of doing it yourself.
sph33r
01-07-2003, 08:01 AM
Well.. no body kit but it has sleepy eyes. This was just adjusted by hand. I bought a Pivot controller and just like they said, the lights are at different angles due to different motor speeds.
http://sph33r.net/240sx/pics/img/240_2002_2.jpg
knives
01-07-2003, 10:07 AM
sph33r, could you post pics of your car from different angles? i'm thinking of painting my coupe flat black.
or if you have a website with pics, that would be even better. thanks.
sph33r
01-07-2003, 11:21 AM
I PM'd ya but in case anyone else wants the site. www.sph33r.net has a couple more pics of my car in all it's ugly glory.
Stylin_240sx
01-07-2003, 02:21 PM
I don't think its all that bad. Doesnt seem to be any rust, thats what makes it ugly I THINK
RedStage
01-08-2003, 02:21 AM
I did a total DIY setup on a bet. And it works.
http://www.geocities.com/velocityyokohama/diy/180lights.html
There might be minor differences for you USDM guys. But if you can verify the wire colors in your cars....they might just be the same.
Like others said. They might/will not stop at the same level...mine don't and my car is a 94.
The damn pivot controller here is $100. And is a Pain to instal. Lazy people pay around $50 to have it put in....
So I saved myself $150 roughly.
RedStage
01-08-2003, 02:22 AM
Here...forgot to add this
Big Body LX
01-14-2003, 05:56 PM
My car... hand adjusted...
http://www.disruptedperceptions.com/dp/rice/jan6/1.jpg
http://www.disruptedperceptions.com/dp/rice/jan6/2.jpg
http://www.disruptedperceptions.com/dp/rice/jan6/3.jpg
Red89AllStockBiotch
01-14-2003, 07:06 PM
Originally posted by RedStage
Here...forgot to add this
kinda looks like your car is mentally retarded with the one side up like that, but oh well, all the reason to love it more...
Driftin_240sx
01-14-2003, 09:49 PM
hey i know this is off topic but Big Body LX what susp. do u have and are those stock wheels painted black???
Big Body LX
01-14-2003, 11:36 PM
Originally posted by Driftin_240sx
hey i know this is off topic but Big Body LX what susp. do u have and are those stock wheels painted black???
Those are stock wheels painted black with 205/50 15" Falken Azenis... highly recommend this setup!
As for the suspension..... well...... I'd rather not say. I was drunk at the time and wanted to be low for a car show I went to.... If I get a job soon I will be fixing it :(.... that's right... you've guessed it... they're cut :(..... Don't shoot me!!!!
Driftin_240sx
01-15-2003, 08:02 AM
ha its ok....the ride must be pretty sh$$ty though.. but it still looks good. i wish there were some springs to make it that low.
david
JasonNagra
01-15-2003, 10:55 AM
Big Body LX,
Your car looks very nice. What percent tint is that on the windows? 35%? 50%? I like it...
I have the exact same car, color and everything, cept I have black Enkei Mesh rims, but the cars look similar. Your tint makes the car look a lot better, and now I must tint my windows as well... :o
Big Body LX
01-15-2003, 12:16 PM
Originally posted by JasonNagra
Your car looks very nice. What percent tint is that on the windows? 35%? 50%? I like it...
The windows are 28%. The legal limit here is 35% but I wanted darker. A local shop told me they'd do 28 and still put a sticker on it so we went ahead with it. I've compared it to 35% side by side and you can tell a difference.
Oh... and yeah... the ride quality is really ****ty.. I'm looking forward to my sportlines!
rps13sh
09-14-2003, 12:46 PM
you dont have to buy a controller. just need a on/off push button from radioshack. its like a $5 job with full control of the height.
RadicalEdward
09-14-2003, 04:42 PM
i sleepy eyed my car for 7$ ...all you need is a wire, a switch (or button i used a button because i can hold it down until the light reaches the desired height) and some wire ends(type will be shown below) (optional solder and soldering iron)
Basically all you have to do is bypass the fuse for your headlights motor .
(i advise you disconnect the battery since you are working with the cars electrons)
Figure out where you want to mount it then messure and cut the wires to size. (from the kick panel to where you want the button to be)
Solder/Attach wire ends to 2 wires the desired lenght. (i advise you make it a little longer because you can always shorten them)
Next you can attach the wires to the button or run the wires first and attach the button later, which ever is easier for you. (i attached the button first because i soldered everything)
Run the wires from the place where you will mount the button to the kick panel (attach wires to the button if they arent already)
Locate the light fuse in the kickpanel (its a 5 on the far side, take it out.)
Put the wire ends where the fuse used to be, you will see metal contact points where the 'legs' of the fuse used to go, one wire goes to each point...(they cant be crossed otherwise it wont work)
All thats left is to test it. It only works when closing the lights, so first open your lights, and try to close them...you will notice that they wont close :confused: :eek: ...well thats what the button is for...hold the button down until the lights go to the point you want them to be. Also you can have the lights on while they are sleepy eyed. To close the lights you hit the button to open them, then hit it again to close them and hold down the "sleepy eye" button and the lights will close.
Hope that helps some of you guys.
-Ed
RadicalEdward
09-14-2003, 04:43 PM
panel
RadicalEdward
09-14-2003, 04:45 PM
wire end
RadicalEdward
09-14-2003, 04:46 PM
what it looks like
old_s13
09-14-2003, 05:04 PM
ghetto fabulouso
92s13
09-14-2003, 05:58 PM
Originally posted by Nismo240SX
[B]i would like to see the lazy eyes on a hatch with a body kit.../B]
Heres my free lazy eyes on my hatch. I have mine controlled by a toggle switch mounted on a carbon fiber DIN switch panel, ran to a wire behind the headlamp button thats just to the left of the steering wheel.(if that makes any sense)
Front 3/4
http://images.cardomain.com/member_img_a/256000-256999/256818_160_full.jpg
Front
http://images.cardomain.com/member_img_a/256000-256999/256818_161_full.jpg
zero.counter
09-14-2003, 08:28 PM
Originally posted by NismoGear5
Also both your headlights may be at different levels of height because they could be worn out. (When you use a controller or home made rig)
ex = one headlight slightly higher that other
Well, Koguchi adjusted his manually...:D
http://www.driftshowoff.com/assets/koguchi3.jpg
mandoz85
09-14-2003, 08:56 PM
heres how to do it for 5 dollars.
http://www.240sxforums.com/forums/showthread.php?t=8270&highlight=sleepy+eyes
fleaf
09-14-2003, 09:21 PM
http://204.210.54.14/pictures/240sx2/DCP_3636-2r.JPG
http://204.210.54.14/pictures/240sx2/DCP_3637-r.JPG
http://192.168.2.19/pictures/240sx2/DCP_3636-2r.JPG
http://192.168.2.19/pictures/240sx2/DCP_3637-r.JPG
I used a toggle switch for mine. easy as pie.
the last two pics aren't supposed to work
rps13sh
09-17-2003, 04:36 PM
my baby...
http://www.theoryseven.com/rokm/sylynt/sleepyeye.jpg
kaidoy
09-17-2003, 08:34 PM
Mine as well spam my car. :D
http://www.imagestation.com/picture/sraid79/p2af73498370c1cb5cc53fba3cfe4b586/fb0f69e4.jpg
Jason
jy116
10-07-2003, 05:00 PM
so hows the nite driving wit sleepy eye mod? Is it stil bright enough? Is ther a way to make it open full at nite, then jsut close back to sleepy eye height when u turn off the headlights...?
Bbandit
10-07-2003, 06:50 PM
http://www.conetoy.com/ :p
exitspeed
10-08-2003, 09:57 AM
all I do with mine is adjust it in the morning if I want to and there like that all day. If I drive at night I just turn my lights on. If I don't drive at night then when I get in my car in the morning there still like that.
It only takes 2 min to do by hand. I would never pay money for a controller.:rolleyes:
jstyle180
10-08-2003, 10:21 AM
Here's mine...
kaidoy
10-08-2003, 11:32 AM
Originally posted by exitspeed
It only takes 2 min to do by hand. I would never pay money for a controller.:rolleyes:
It cost less than $5 for a switch a little bit of wire to make your own controller. Plus you have in car adjustability and can turn on ur lights when they are "sleepy." :rolleyes:
Jason
KiDyNomiTe
10-08-2003, 12:08 PM
Originally posted by jstyle180
Here's mine...
what kinda headlights you got?
eBay? PDM?
And here is mine
\/ \/ \/ \/
and mine... check signature
jstyle180
10-08-2003, 02:40 PM
KiDyNomiTe
Those are RAYBRIG Housings w/blue tint and RAYBRIG
"HID look" Bulbs.
KiDyNomiTe
10-08-2003, 03:23 PM
Originally posted by jstyle180
KiDyNomiTe
Those are RAYBRIG Housings w/blue tint and RAYBRIG
"HID look" Bulbs.
got any night pics?
jstyle180
10-08-2003, 03:26 PM
Let me check...
jy116
10-08-2003, 04:57 PM
Oic... so the pics i see of ppl with headlights om and sleepy mode have done a wring mod that doesnt make the lights go back to normal huh...
Thats good to hear, cuz i can drive "sleepy" in the day [pulled fuse method w/o wiring modification], and if i decide to drive at night, just turn on the headlights and it goes back to normal rite? I hardly drive at nite since the car sits at home and im at skool...
Yeh, I also wanna se jstyle180 with sleepy eyes at night [with headlights on]... do u drive like that and is it coo [enough light]?
KiDyNomiTe
10-08-2003, 05:25 PM
mine are the pulled fuse methods, some have the switch/wiring, some have the pivot.
All personal preference. pros and cons on all three ways, and sure theres more ways.
within hopefully 2 weeks, my car will be permanently half asleep. :D Not by choice, though... Well, sort of by choice. I can't bolt up my headlight motors, so it'll have to be fixed. :o Wait for it... you'll be disgusted at how bad the car looks, yet how good it all comes together! ... Or something!
jstyle180
10-08-2003, 09:31 PM
No night pics.
Ill get some soon.
I drive w/the lights like that when there's still
some light out.Not safe when its all dark!
By the way mine is set up w/toggle switches,no need to
pop the hood, or pull any switches ,its all done from inside .
FRpilot
10-11-2003, 09:54 AM
Originally posted by zero.counter
Well, Koguchi adjusted his manually...:D
http://www.driftshowoff.com/assets/koguchi3.jpg
koguchi and kaidoy's sleepy headlights look a little off. one side seems higher than the other.
YoungRookie
10-12-2003, 10:58 AM
Here is my car...check the sig
\/
Edit: My car is beggin me for coilovers
mrmephistopheles
10-12-2003, 08:19 PM
ok
this thread has taken care of the poster's request.
heaven forbid anyone look in the gallery..
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.