olah.inc
07-30-2008, 02:19 PM
Features
-Standard ECU features
-"3D" Fuel and Ignition maps (as on any sophisticated aftermarket ECU)
-Configurable ignition and injection outputs to suit different applications
-Inputs for water temperature, air temperature, auxiliary temperature (eg turbo), manifold air pressure, throttle position, knock sensor, EGO (exhaust gas oxygen)
-Outputs for four injector groups - allows full sequential injection up to 4-cylinders, or semi-sequential injection up to 8- cylinders.
-Outputs for three igniter groups (four optional) - allows full sequential spark up to four cylinders and wasted spark systems up to 8-cylinders, or any conventional distributor systems.
-Eight configurable auxiliary outputs - four of which are configurable as high current outputs, three of which are PWM capable.
-PC interface
-Field upgradeable firmware
-Eight configurable auxiliary digital inputs
-Datalogging via PC software
Special Features
-Adaptive fuel control - with configurable tolerances and loop gains, and conditions under which adaptive behaviour takes place
-Narrow-band (factory EGO sensor) closed loop fuel control
-High current programmable outputs - allows direct drive of solenoid valves for boost control, air bypass etc
-Special function programmable outputs - allows control of anti-pollution purge valves, air conditioners etc
-Open-loop and closed-loop idle bypass control - allows configuration of increased idle bypass amount based on low battery, electrical load, air conditioner, as well as correction based on RPM
-Programmable for different crank angle sensor waveforms
-Open-loop and closed-loop boost control
-Traction control and launch control
-Many other features...
for more informations please visit the homepage .:AdapTronic:. (http://www.adaptronic.com.au/index.php)
The ECU comes with:
- Adaptronic e420c ECU
- 0,5m loom
- 3bar map Sensor + Plug & Harness
- Air Tempsensor + Plug & Harness
- Datacable
- Software + manual on disc
-Ignition coils
price is 1250 $ with shipping from germany to u.s. (or else)
or make me an offer
http://img403.imageshack.us/img403/3790/p210308161301gz4.jpg
-Standard ECU features
-"3D" Fuel and Ignition maps (as on any sophisticated aftermarket ECU)
-Configurable ignition and injection outputs to suit different applications
-Inputs for water temperature, air temperature, auxiliary temperature (eg turbo), manifold air pressure, throttle position, knock sensor, EGO (exhaust gas oxygen)
-Outputs for four injector groups - allows full sequential injection up to 4-cylinders, or semi-sequential injection up to 8- cylinders.
-Outputs for three igniter groups (four optional) - allows full sequential spark up to four cylinders and wasted spark systems up to 8-cylinders, or any conventional distributor systems.
-Eight configurable auxiliary outputs - four of which are configurable as high current outputs, three of which are PWM capable.
-PC interface
-Field upgradeable firmware
-Eight configurable auxiliary digital inputs
-Datalogging via PC software
Special Features
-Adaptive fuel control - with configurable tolerances and loop gains, and conditions under which adaptive behaviour takes place
-Narrow-band (factory EGO sensor) closed loop fuel control
-High current programmable outputs - allows direct drive of solenoid valves for boost control, air bypass etc
-Special function programmable outputs - allows control of anti-pollution purge valves, air conditioners etc
-Open-loop and closed-loop idle bypass control - allows configuration of increased idle bypass amount based on low battery, electrical load, air conditioner, as well as correction based on RPM
-Programmable for different crank angle sensor waveforms
-Open-loop and closed-loop boost control
-Traction control and launch control
-Many other features...
for more informations please visit the homepage .:AdapTronic:. (http://www.adaptronic.com.au/index.php)
The ECU comes with:
- Adaptronic e420c ECU
- 0,5m loom
- 3bar map Sensor + Plug & Harness
- Air Tempsensor + Plug & Harness
- Datacable
- Software + manual on disc
-Ignition coils
price is 1250 $ with shipping from germany to u.s. (or else)
or make me an offer
http://img403.imageshack.us/img403/3790/p210308161301gz4.jpg