jdm kouki 180sx bumper lights

[sausage180]

I've got a vertex front bumper and I bought the JDM Kouki 180sx bumper lights along with the JDM harness to go with it. The usdm harness has a red, green & black wire pattern and the Jdm one has 2 black wires with gold on them. Has anyone installed these and if so how? Thanks in advance.

[kensreliableb18b]

IIRC the greenblack is signal. red is constant. wire to your desire.

[brian m]

http://zilvia.net/f/showthread.php?t=169993:bigok:

[MrFairlady]

Green is what makes it Blink IIRC.
The position lights you sepeaking of Shouldn't Blink....so just use the 2 that match for those.

now if you want the Fender Lights to blink w/ the Lower turn signals (if your bumper uses them/have them)...those are the ones that blink.
You need all 3 wires for them to Become the Blinkers.

Simple but can get confusing - espically if you do what I did and have the OEM S13 Side fender lights Blink w/ the JDM Kouki Lower Signals. I made them Blink alternately on accident (on 1 side somehow) and had to Figure out how I did it so the other side would do the same.

position Lights should be simple.