lutz5329
07-18-2008, 11:06 PM
Ok I'm out of money and I need to get rid of my project because I need money for school. I've put a lot of money into this car (http://zilvia.net/f/showthread.php?p=2188337#) and I'm not in any rush to sell. Just wanting to see if anyone is interested.
I have an 89 240sx hatchback that is just the shell. I have clean title and it has never been in any sort of reck. I believe it has around 150 thousand on the shell. It has rust on the back hatch where the wing was and thats about it. It is an automatic shell and I was going to swap it to manual but dont have the time. I priced used parts for around 150 for the swap I already have the manual break pedal in there. It has new steering (http://zilvia.net/f/showthread.php?p=2188337#) rod ends new steering bushing and will come with VLSD but it is not installed.
http://photos.freshalloy.com/gallery/d/36147-2/DSCN1174.JPG
Front end with fmic in. And I do have the hood windshield is cracked
http://photos.freshalloy.com/gallery/d/39410-1/DSCN0502.JPG
http://photos.freshalloy.com/gallery/d/39416-1/DSCN0503.JPG
VLSD does come with shafts
http://photos.freshalloy.com/gallery/d/34848-2/DSCN1147.JPG
The main part of this post is the engine that I need to sell. It has a ton of stuff done to it I'm going to try to list off everythings but I'll prob forget some stuff. It is a complete swap except for a turbo and exhaust (http://zilvia.net/f/showthread.php?p=2188337#) manifold. The engine harness I believe is cut but I was told it is all there( i was planning on sending it in to be prof. done). heres the list.
<LI itxtvisited="1">$60 steering bushings & boots <LI itxtvisited="1">$55 Steering rod ends <LI itxtvisited="1">$400 Megan dump+down pipe & ssbov+hotpipe <LI itxtvisited="1">$2000 redtop <LI itxtvisited="1">$100 exedy stage 1 clutch <LI itxtvisited="1">$200 front mount without cold pipe <LI itxtvisited="1">$200 power steering lines <LI itxtvisited="1">$500 CP pistons 8.5-1,86.5mm <LI itxtvisited="1">$350 Eagle rods H beam <LI itxtvisited="1">$320 VLSD 4.4:1 ratio/ 5 bolt <LI itxtvisited="1">$225 fidanza flywheel <LI itxtvisited="1">$150Unorthodox Racing Pulley
$80 Greddy rocker arm stoppers
$500 HKS step 2 264 intake and exhaust cams
$350 HKS adjustable cam gears
$200 HKS valve springs
$250 Ported and Polished head <LI itxtvisited="1">$1125 bottom end work <LI itxtvisited="1">Bearings <LI itxtvisited="1">Machine work
Engine cryogenics<LI itxtvisited="1">$10 Trans mount and brace
$230 ARP head studs & Cometic HG 86.5mm +.040 nibit will also come with cut harness, ecu, maf, etc. The only thing the engine (http://zilvia.net/f/showthread.php?p=2188337#) doesnt come with is a turbo and the manifold
http://photos.freshalloy.com/gallery/d/39407-1/DSCN1270.JPG
http://photos.freshalloy.com/gallery/d/39404-1/DSCN1269.JPG
http://photos.freshalloy.com/gallery/d/39401-1/DSCN1262.JPG
I can take more pics but there it is. The head is at the shop right now getting checked and making sure everythings good. The head was used for around 4,000 miles but the bottom end is brand new. I have most receipts but not all. If you have any questions just ask. hopefully someone out there will want to finish what I started.
I've put over 8,000 into this car. I'm looking for around prob around 5,500obo for everything car with clean title, full engine except turbo (http://zilvia.net/f/showthread.php?p=2188337#) and exhaust manifold
Thanks and shoot me a pm if your interested. Like everyone says my lose is your gain. And again its obo so shoot me an offer. But please no low balling. and again I'm not in anyhurry to sell. And it would be rediculous to ship this stuff so prob no shipping but we can work something out.
Dont really want to part out stuff. I would split the car and the engine but dont want to part out everything if I can help it.
I also forgot to mention I might be wiling to trade so let me know what you got and we can figure soemthing out. Thanks
I have an 89 240sx hatchback that is just the shell. I have clean title and it has never been in any sort of reck. I believe it has around 150 thousand on the shell. It has rust on the back hatch where the wing was and thats about it. It is an automatic shell and I was going to swap it to manual but dont have the time. I priced used parts for around 150 for the swap I already have the manual break pedal in there. It has new steering (http://zilvia.net/f/showthread.php?p=2188337#) rod ends new steering bushing and will come with VLSD but it is not installed.
http://photos.freshalloy.com/gallery/d/36147-2/DSCN1174.JPG
Front end with fmic in. And I do have the hood windshield is cracked
http://photos.freshalloy.com/gallery/d/39410-1/DSCN0502.JPG
http://photos.freshalloy.com/gallery/d/39416-1/DSCN0503.JPG
VLSD does come with shafts
http://photos.freshalloy.com/gallery/d/34848-2/DSCN1147.JPG
The main part of this post is the engine that I need to sell. It has a ton of stuff done to it I'm going to try to list off everythings but I'll prob forget some stuff. It is a complete swap except for a turbo and exhaust (http://zilvia.net/f/showthread.php?p=2188337#) manifold. The engine harness I believe is cut but I was told it is all there( i was planning on sending it in to be prof. done). heres the list.
<LI itxtvisited="1">$60 steering bushings & boots <LI itxtvisited="1">$55 Steering rod ends <LI itxtvisited="1">$400 Megan dump+down pipe & ssbov+hotpipe <LI itxtvisited="1">$2000 redtop <LI itxtvisited="1">$100 exedy stage 1 clutch <LI itxtvisited="1">$200 front mount without cold pipe <LI itxtvisited="1">$200 power steering lines <LI itxtvisited="1">$500 CP pistons 8.5-1,86.5mm <LI itxtvisited="1">$350 Eagle rods H beam <LI itxtvisited="1">$320 VLSD 4.4:1 ratio/ 5 bolt <LI itxtvisited="1">$225 fidanza flywheel <LI itxtvisited="1">$150Unorthodox Racing Pulley
$80 Greddy rocker arm stoppers
$500 HKS step 2 264 intake and exhaust cams
$350 HKS adjustable cam gears
$200 HKS valve springs
$250 Ported and Polished head <LI itxtvisited="1">$1125 bottom end work <LI itxtvisited="1">Bearings <LI itxtvisited="1">Machine work
Engine cryogenics<LI itxtvisited="1">$10 Trans mount and brace
$230 ARP head studs & Cometic HG 86.5mm +.040 nibit will also come with cut harness, ecu, maf, etc. The only thing the engine (http://zilvia.net/f/showthread.php?p=2188337#) doesnt come with is a turbo and the manifold
http://photos.freshalloy.com/gallery/d/39407-1/DSCN1270.JPG
http://photos.freshalloy.com/gallery/d/39404-1/DSCN1269.JPG
http://photos.freshalloy.com/gallery/d/39401-1/DSCN1262.JPG
I can take more pics but there it is. The head is at the shop right now getting checked and making sure everythings good. The head was used for around 4,000 miles but the bottom end is brand new. I have most receipts but not all. If you have any questions just ask. hopefully someone out there will want to finish what I started.
I've put over 8,000 into this car. I'm looking for around prob around 5,500obo for everything car with clean title, full engine except turbo (http://zilvia.net/f/showthread.php?p=2188337#) and exhaust manifold
Thanks and shoot me a pm if your interested. Like everyone says my lose is your gain. And again its obo so shoot me an offer. But please no low balling. and again I'm not in anyhurry to sell. And it would be rediculous to ship this stuff so prob no shipping but we can work something out.
Dont really want to part out stuff. I would split the car and the engine but dont want to part out everything if I can help it.
I also forgot to mention I might be wiling to trade so let me know what you got and we can figure soemthing out. Thanks