240sx splash sheild

[spool3n240]

my car was slammed and i need new splash shields. i cant find them any where for a 91. where can i get them if its possible, and i have seen them for the s14 but not sure if they will work. please let me know

[240sxScores]

splash shields? like fender liners or the plastic piece that goes under the nose of the car? You dont need either of those im not running any and havent had any problems.

[spool3n240]

yea the fender liners, i wanted to get a new pair cause my bov is right in the open then.


splash shields? like fender liners or the plastic piece that goes under the nose of the car? You dont need either of those im not running any and havent had any problems.

[projectRDM]

Where do you think you'd find them, WalMart? How about McDonalds?

It's an OE piece, either find used ones at a junkyard or buy new at the dealer. There is no other option unless you've found a way to make them yourself.

[corriganjoshua]

yea the fender liners, i wanted to get a new pair cause my bov is right in the open then.
Ide move the bov up stream a little more than.

[spool3n240]

why couldn't you just say that instead of making another wise comment


Where do you think you'd find them, WalMart? How about McDonalds?

It's an OE piece, either find used ones at a junkyard or buy new at the dealer. There is no other option unless you've found a way to make them yourself.

[spool3n240]

i wish i could i got the flange welded on and cant really move it any other way, thanks tho

Ide move the bov up stream a little more than.

[corriganjoshua]

why couldn't you just say that instead of making another wise comment
Did you read his signature? Hes pointing out an obvious point and sometimes constructive criticism is the best way of letting someone know hey...reach down and grab those little nuts and use them search engines:naughty:

[corriganjoshua]

i wish i could i got the flange welded on and cant really move it any other way, thanks tho
Buy some more chargepipe for like 5 bucks and move it.

[spool3n240]

dude iv been searching for so long, trying to buy them for other members in the classifieds and whatnot. i just cant seem to find them and wanted to see if anyone could help me out

Did you read his signature? Hes pointing out an obvious point and sometimes constructive criticism is the best way of letting someone know hey...reach down and grab those little nuts and use them search engines:naughty:

[sr20boostn20]

ive moved the location of my bov multiple times, cut it off weld a cap on the hole and weld it on in a new spot not really that difficult.

also my bov is located bottom of hotpipe before the intercooler i dont have a front bumper on at the moment or fender liners i have no problems

http://img502.imageshack.us/img502/3383/dscf1528vt3.jpg (http://imageshack.us)

[projectRDM]

why couldn't you just say that instead of making another wise comment

What fun would that be?

It's called common sense, something you seem to lack. If you needed a tire, would you buy it at Kentucky Fried Chicken, or a tire store?

[spool3n240]

thats exactly how mine is just angled towards the tire


ive moved the location of my bov multiple times, cut it off weld a cap on the hole and weld it on in a new spot not really that difficult.

also my bov is located bottom of hotpipe before the intercooler i dont have a front bumper on at the moment or fender liners i have no problems

http://img502.imageshack.us/img502/3383/dscf1528vt3.jpg (http://imageshack.us)

[spool3n240]

if you didn't know of a tire store near you would you ask someone that knew?


What fun would that be?

It's called common sense, something you seem to lack. If you needed a tire, would you buy it at Kentucky Fried Chicken, or a tire store?

[sr20boostn20]

how much you trying to pay for em i have 2 good ones that just came out of my new project

[aznpoopy]

lmao.
you're from new york. you should have a thicker skin

car-part.com for junkyard listings
local nissan dealer if you want to pick it up (phone book)
i like courtesyparts.com or everythingnissan.com for online orders

done

[ZX88]

just make some out of plastic.

[bizcotch]

:bigok: Here you go!!

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214761&chapter=AEF3713&appSectionid=2399&groupid=51836&subgroupid=2403&componentid=15164&make=25&model=240sx&year=1991&graphicID=3713050&callout=2&catalogid=2

[spool3n240]

thanks everyone shouldnt have a problem now:ghey: