PDA

View Full Version : yet again another sr problem


sicairos_2007
07-06-2008, 08:27 AM
My sr boggs abit right before i hit boost, what can it be timing is perfect checked several times, also sometimes boggs alittle while taking off but rarly happens

luvsr20
07-06-2008, 08:54 AM
I had a similar problem, check your MAF, your couplers and your vaccum lines. Make you don't have a leak any where. Try spraying electrical cleaner on the diode on the MAF to see if that clears up the problem.

renegade_ewok
07-06-2008, 09:33 AM
Does it happen in the 2000-2500 RPM range? I have a bogging issue too but I think its from a vented BOV. If I get on the throttle a lot in the low RPMs and have like 1-2psi of boost it won't ever bog. But if I am casually driving around town in vaccuum it will randomly bog - it feels like a weak misfire but its moreso like a hesitation. I have yet to figure it out but I really think my issue is a vented BOV.

What do you have done to the SR?

sicairos_2007
07-06-2008, 10:20 AM
I dont have a BOV on it right now, i have checked my vaccumlines and what not, ill try the elctrical cleaner get back to you guys in a bit thanks.

sicairos_2007
07-06-2008, 10:23 AM
Could the gap on the spark plugs cause this?

sicairos_2007
07-06-2008, 10:36 AM
renegade ewok... yeah something like that or also when im at a stop and start going and sometimes right when i am about to get boost. I only have a FMIC light weight flywheel and clutch running stock boost, nothing special....