PDA

View Full Version : CA18 guru's help me!!!!

da_grey_s13
07-05-2008, 04:03 PM
i have a CA with the xspower ebay manifold and i have a t28 turbo....After trying to put on the factory oem turbo elbow, i discovered that it hit the bell housng and the corner of the block. i thought, well, maybe they sent me the wrong elbow for the car so i borrowed my friends oem elbow and its the same as mine! Do i need one for an SR or something??
Somnambulist
07-05-2008, 09:58 PM
It's probably the ebay manifold that's making it hit. Get a quality manifold?

Otherwise see if you can have a friend fab up a custom elbow or something.
slw240sx
07-06-2008, 12:43 AM
most of the time when you get a EBay manifold you have to use the matching Ebay turbo outlet, we run into this all the time with SR's and i had the problem when i used one back in the day on my CA18.

if neither fit junk that manifold and go back to stock.

Jon
da_grey_s13
07-06-2008, 10:05 AM
ok so i'll try an aftermarket elbow first and if that doesn't work i'll have to get a stock manifold from somewhere....this motor came with this manifold :-/
ch1873857
07-06-2008, 11:07 AM
the xs power manifolds do actually change the position of the turbo. but you can still make it work. like someone else said, just use the matching xs parts and you'll be fine.

but it all else fails, i have a stock manifold for you. i have all the stainless xs parts if you are interested also
slw240sx
07-06-2008, 01:07 PM
if you end up needing a CA stock manifold let me know, i have one or two laying around the shop.

Jon
exitsine
07-06-2008, 01:30 PM
just have it modified by a local welder?
ch1873857
07-06-2008, 02:04 PM
why waste the time? there is nothing wrong with the stock piece. i wish i wouldve stayed with it because nothing with it. you will just have to keep buying more and more shit. my turbo lines didnt \fit so i ended up buying new ones. just one thing after another.
DALAZ_68
07-06-2008, 02:15 PM
most of the time when you get a EBay manifold you have to use the matching Ebay turbo outlet, we run into this all the time with SR's and i had the problem when i used one back in the day on my CA18.

if neither fit junk that manifold and go back to stock.

Jon
yup yup...took the words right out of my mouth...:keke:

GL with it...if anything u just need the XS elbow to match up positioning