PDA

View Full Version : Can someone with R33 calipers take some measurements?


0100
06-11-2008, 11:14 PM
I need 3 measurements for r33 gts-t calipers before I place my order for a set of wheels. I don't have the r33 gts-t calipers yet so I can't take these measurements myself.

These are for R33 gts-t calipers not the gtr brembo's.

1. Distance from rotor to face of caliper. GREEN LINE
2. Distance from rotor HAT to face of caliper. NOT THE RADIAL MEASUREMENT. RED LINE

(1 and 2 measure along the same plane) If measuring while on the car it's a "LATERAL MEASUREMENT", if that makes sense.

3. RADIAL MEASUREMENT FROM CENTER OF HUB TO OUTERMOST POINT ON THE CALIPER. ORANGE LINE

http://www.outlawhost.com/caliper1.jpg

http://www.outlawhost.com/caliper2.jpg

Thanks I greatly appreciate it! :bow:

Jbma327
06-11-2008, 11:30 PM
From the actual surface of my rotors to the face of the calipers is 2 1/2 inches. I will need to take off my wheel to measure it from the hat.

Hope this helps.

0100
06-11-2008, 11:33 PM
Damn that was fast, you rock! Big thanks I appreciate it. +rep with my massive rep power. lol

0100
06-13-2008, 01:10 PM
Ok got pictures posted up with the three measurements I need. I really appreciate any help.

Thanks!