macidcrook
06-10-2008, 12:54 PM
NEW PRICE $6500 OBO i have all the AC parts just need to be installed.
im selling my maroon 1989 240sx coupe with 250k on the chassis. the motor had around 45k when i bought it with bad rings. i have fully rebuilt the motor with new pistons and rings .020 over and new factory bearings. motor has less then 1500 miles on it since rebuild in febuary the car runs great. 330whp on 14.7psi. Registered and smogged. i can take care of the smog for you if needed.
im selling it cause im a mechanic and most of the fun is building it. so im going to start a new project.
s13 blacktop sr20det
new .020 oversized pistons
new piston rings
New factory bearings main and conrod
arp headstuds
koyo radiator
JWT gt28rs turbo
atp oil restictor
injen 3" intake
Z32 MAF
apexi Nior 3" exhaust
trust 3" down pipe
3" striaght pipe
Tomei style equal length manifold
divorced dump pipe
cx motorsports FMIC
550cc deatch werks injectors
apexi safc neo
apexi avc-r boost controller
greddy Egt guage
autometer oil and water temp guages
hks type 1 turbo timer
hks ssqv bov
spec stage 4 clutch
stillen aluminium flywheel 9 lbs with brand new friction plates
kyb agx shocks
eibach springs
porterfield front pads
metal subframe spacers
sparco evo seat blue.
seatrab oil cooler installed w/ relocated oil filter
oil pressure gauge installed
oil temp gauge#2 installed
thermal switch installed for rad fan
small fan installed on oil cooler
Nismo 4.38:1 rear end ratio
r32 r200 diff with 5 bolt axles and cooling extension
vlsd still good
Not installed but included:
energy suspension bushing kit.
cons:
last owner broke the outside handle and is alittle dented do to prying on it. a replacement will slide in fine. im going to the junk yard to hopefuly find one.
theres 2 holes in the doors where the last owner had tweeters in it. their onlt about an inch and a half big
a few scratches and dents
$6500 OBO. Cash only no trades
please pm me with any questions thanks
http://i152.photobucket.com/albums/s181/macidcrook/l_586ed449d89d30bb101ca286f34db58a.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1082.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1083.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1084.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1085.jpg
the vents in the middle are where the oil water and exhaust temp gauges are. i was rewiring them thats why its out.
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1081.jpg
...UPDATE...
sparce seat installed.
seatrab oil cooler installed w/ relocated oil filter
oil pressure gauge installed
oil temp gauge#2 installed
thermal switch installed for rad fan
small fan installed on oil cooler
Nismo 4.38:1 rear end ratio
r32 r200 diff with 5 bolt axles and cooling extension
vlsd still good
fixed latch system
engine bay
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1573.jpg
underneath front
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1572.jpg
oil cooler pics
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1559.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1558.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1562.jpg
oil filter
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1569.jpg
Differential
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1563.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1567.jpg
interior
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1578.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1590.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1585.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1579.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1593.jpg
motor before it was installed
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_0503.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_0510.jpg
garrett GT28RS disco potato
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_0506.jpg
more info go here:
http://zilvia.net/f/chat/209462-macs-s13-sr20det-debut.html#post2264640
im selling my maroon 1989 240sx coupe with 250k on the chassis. the motor had around 45k when i bought it with bad rings. i have fully rebuilt the motor with new pistons and rings .020 over and new factory bearings. motor has less then 1500 miles on it since rebuild in febuary the car runs great. 330whp on 14.7psi. Registered and smogged. i can take care of the smog for you if needed.
im selling it cause im a mechanic and most of the fun is building it. so im going to start a new project.
s13 blacktop sr20det
new .020 oversized pistons
new piston rings
New factory bearings main and conrod
arp headstuds
koyo radiator
JWT gt28rs turbo
atp oil restictor
injen 3" intake
Z32 MAF
apexi Nior 3" exhaust
trust 3" down pipe
3" striaght pipe
Tomei style equal length manifold
divorced dump pipe
cx motorsports FMIC
550cc deatch werks injectors
apexi safc neo
apexi avc-r boost controller
greddy Egt guage
autometer oil and water temp guages
hks type 1 turbo timer
hks ssqv bov
spec stage 4 clutch
stillen aluminium flywheel 9 lbs with brand new friction plates
kyb agx shocks
eibach springs
porterfield front pads
metal subframe spacers
sparco evo seat blue.
seatrab oil cooler installed w/ relocated oil filter
oil pressure gauge installed
oil temp gauge#2 installed
thermal switch installed for rad fan
small fan installed on oil cooler
Nismo 4.38:1 rear end ratio
r32 r200 diff with 5 bolt axles and cooling extension
vlsd still good
Not installed but included:
energy suspension bushing kit.
cons:
last owner broke the outside handle and is alittle dented do to prying on it. a replacement will slide in fine. im going to the junk yard to hopefuly find one.
theres 2 holes in the doors where the last owner had tweeters in it. their onlt about an inch and a half big
a few scratches and dents
$6500 OBO. Cash only no trades
please pm me with any questions thanks
http://i152.photobucket.com/albums/s181/macidcrook/l_586ed449d89d30bb101ca286f34db58a.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1082.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1083.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1084.jpg
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1085.jpg
the vents in the middle are where the oil water and exhaust temp gauges are. i was rewiring them thats why its out.
http://i152.photobucket.com/albums/s181/macidcrook/IMG_1081.jpg
...UPDATE...
sparce seat installed.
seatrab oil cooler installed w/ relocated oil filter
oil pressure gauge installed
oil temp gauge#2 installed
thermal switch installed for rad fan
small fan installed on oil cooler
Nismo 4.38:1 rear end ratio
r32 r200 diff with 5 bolt axles and cooling extension
vlsd still good
fixed latch system
engine bay
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1573.jpg
underneath front
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1572.jpg
oil cooler pics
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1559.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1558.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1562.jpg
oil filter
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1569.jpg
Differential
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1563.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1567.jpg
interior
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1578.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1590.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1585.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1579.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_1593.jpg
motor before it was installed
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_0503.jpg
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_0510.jpg
garrett GT28RS disco potato
http://i152.photobucket.com/albums/s181/macidcrook/sr20det/IMG_0506.jpg
more info go here:
http://zilvia.net/f/chat/209462-macs-s13-sr20det-debut.html#post2264640