View Full Version : Is there any homemade turbo for ka-de?
RiceKidd
06-05-2008, 01:06 AM
I was wondering if there is any turbo that i can pull of another car to put in the ka-de. like is there any that will off a toyota, sabb, volvo, vw, mitsu? let me know. kind of curious.:confused:
ABAKER240
06-05-2008, 03:47 PM
not that i know of man, if your looking for a cheap way out, get an ca18det, turboing a ka is expensive
Might want run a search. There is ALOT of info out there. Might want to start off by looking at this sticky. http://www.zilvia.net/f/showthread.php?t=62609
Cheap build would be a megan/ebay bottom mount t-series flange manifold. It will take a stock turbo off any of the sr20det which can be found pretty easily. You can use sr20 injectors, which are a direct fit and are cheap. Get a used SAFC, buy a ebay fmic with piping for $100. Get a ebay sr20 dowpipe, get it modified when you line everything up. Your also prob going to need to fab some type of intake tube that will work with your stock maf. Everything else like misc lines, fittings, bov, etc is up to u. Go pay someone to tune it. If your motor has high miles (which most stock ka motors have), just be prepared for that motor to blow.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.