Help!!!!!

[ocska04]

OK peeps so i was doing my intercooler piping and putting my new greddy intake manifold and now that i have it all hooed up i encountered this lil problem i dont know where this thick line goes so when i try starting my car it cranks over all and then just dies

http://s109.photobucket.com/albums/n75/ocska04/?action=view&current=problem001.jpg

[Forge_55b]

have you tried capping that off, cause im guessin its a vacuum line that the greddy manifold doesn't have outlet for or what not

[luvsr20]

I would also agree to cap it off if there is not an extra nipple to hook it up too. But u probably need a vacuum source....

[Markovich]

fuel return line
make sure you get that hooked up or a major fire can occure

later

[SleeperSx]

fuel return line
make sure you get that hooked up or a major fire can occure

later


Agree fuel return line!! How do you miss this?

[ocska04]

ok so this is kinda a dumb question but where do i hook it up to?

[xsparc]

well to start id bee looking at where you are spilling fuel from since thats the return line. try looking near the FPR

[stillen]

Goto this link, at the bottom of the page there are all the instructions clearly in pdf format. http://www.greddy.com/tech/

All outlets of the intake manifold for the greddy should be connected to something and all the hoses that came the greddy manifold should be used. Nothing should be capped.